Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Equipment overview for the XC series

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Measuring devices
  3. Temperature
  4. Thermal imaging camera XC300
  5. Detailed comparison of equipment features

Equipment overview for the XC series

Always optimally prepared with these professional thermal imaging cameras

Thanks to many advanced equipment features these thermal imaging cameras not only quickly and effectively ­create transparency in thermographic measuring tasks, the model structure is also agreeably transparent: Both models are delivered fully equipped, the only difference consists in the detector specifications!

Equipment features and practical benefit:

Equipment feature

Your practical benefit

Image sensor with 640 x 480
measuring points
Maximum resolution and clear thermal images are ensured by 307,200 independent temperature measuring points. This means four times more data than with a camera with 320 x 240 pixels resulting in a clearly higher measurement accuracy.
Image sensor with 384 x 288
measuring points
High measurement accuracy due to 110,592 independent temperature measuring points. With this detector you can be located more than twice as far away from the target than with a 160 x 120 detector and still measure with the same accuracy.
High geometric resolution
of 0.65 mrad
Defines the solid angle measure for the smallest resolvable measuring point. The smaller this value, the more precisely can smaller problems be detected from a larger distance. At a camera-to-subject distance of one metre the individual measuring spot of each thermal pixel on principle has a diameter of 0.65 mm.
High geometric resolution
of 1.1 mrad
Defines the solid angle measure for the smallest resolvable measuring point. The smaller this value, the more precise are the measurement results. At a camera-to-subject distance of one metre the individual measuring spot of each thermal pixel on principle has a diameter of 1.1 mm.
High refresh rateof 50/60 Hz The high refresh rate ensures a permanent real-time thermal image reproduction. Not a single image and thus no important thermographic information is omitted in real-time presentations.
Fully radiometric thermal images Precise temperature measurement in the entire picture, no interpolation interferences. For every single pixel the sensor has an individual measuring point, supplying accurate temperature values for this pixel only. The absolute temperature can be read pixel for pixel.
High thermal sensitivity Reliable diagnoses even with the smallest changes in temperature. Even the smallest changes in temperature become apparent. A high sensitivity reduces thermal noise in the infrared image. The smaller the value, the better the quality of the image.
Uncooled microbolometer sensors No movable sensor parts, extreme durability, clear and detailed images. Small size, light weight, low power consumption, completely maintenance-free.
Laser distance measuring function An integrated distance meter permitting laser-supported distance measurements ranging up to 30 m eliminates the need for you to take an external distance measuring device with you. That way, accessibility and distance of the measuring objects can be easily determined.
Periodic image storage Permits periodic recordings of thermal images with a preselectable recording frequency, e.g. every 30 minutes. With this recording interval you can easily document the thermal long-term behaviour of an object.
1x to 10x zoom via infinitely variable electronic regulation An infinitely adjustable zoom with high magnification factor offers you more flexibility when looking at faraway details. This increases the number of possible applications for the inspection of poorly accessible or especially secured areas.
Autofocus system Thanks to a motorized lens you can quickly zero in on the desired measuring object with high precision even in unclear environments.
PanoFold display – inclinable, swivel-mounted 3.5-inch folding LCD The combined motion range of the folding display (inclinable by 180° and pivoting by 270°) provides you with an ergonomically optimized viewing position in every situation for looking at the test object from any angle. Fully folded it protects monitor and operator keypad from dirt.
Dual keypad-touchscreen control Owing to the combination of control keys and capacitive touchscreen it has become still easier and more intuitive to use the thermal imaging camera. This way, you can meet your target faster and use your camera more effectively.
High-capacity Li-ion battery More than double the operating time of a standard Li-ion battery. Less battery changes required, fewer charging intervals, longer non-stop measuring applications.
Automatic temperature tracking (hot/cold spot) Coldest or hottest spots on the measuring objects are detected in real time and displayed automatically.
Temperature alarm Acoustic and visual alarm help you to faster detect critical areas. Also ideal for dew point detection at surfaces.
Robust two-component construction with IP54 type of protection Robust housing, dust- and splash-proof – ideal for rough industrial applications and all kinds of weather when measuring outside. Thanks to two-component construction with integrated rubber protectors impact-proof to a drop height of 1.80 metres.
Integrated laser pointer Simplifies the quick location of problematic areas and the visual targeting in poorly lit surroundings.
Diverse measuring and analysis functions Reliable, quick and precise results due to dynamic eight-point measuring, automatic temperature tracking, differential measurements, line profile analysis, sector analysis, isotherm and alarm function.
Intelligent power management High battery performance, longer non-stop measuring applications.
Correction of the reflected ambient temperature When the surface of the object to be measured has a low degree of emission and the object temperature contrasts rather strongly with the surface temperature, the temperatures measured by the thermal imaging camera are being influenced. Such measurement errors can be compensated for by adapting the reflected ambient temperature.
Professional analysis software No additional costs for expensive software: Full-fledged analysis and documentation program with numerous functions for evaluation, organization and documentation already included in the scope of delivery.
Bluetooth (optional) Wireless connection facility for an optional headset.
Voice recording Comment every image on site with valuable additional information (optionally available headset required).
Data memory already integrated Uncomplicated storage management without separate memory card that needs to be carried along. Quick flash memory with a high data transfer rate and capacity for several thousand images.
Standard file format Storage of the entire infrared image information in one fully radiometric JPEG format. No special software required for processing as with proprietary file formats. Advantage: More flexibility for analyses and evaluations, quicker report generation.
Picture-in-picture display function DuoVision This display mode serves for the superimposition of infrared and real images in random intensities for a better orientation.
Picture-in-picture display function DuoVision Plus Combines the infrared image information with high-contrast details of the visible light spectrum from the real image camera for the real-time indication of an extremely detailed thermal image fusion on the camera display. Advantage: Easier orientation, localization and assessment during the measurement.
Software function DuoVision For a better evaluation and professional documentation, infrared and real image can be superimposed as desired and stored via the software as a new file.
Software function DuoVision Plus Via the software, infrared and real image can be stored as contour emphasizing thermal image in which the radiometric image information is combined with the high-contrast details of the real image.
IR video function Non-radiometric IR videos can be used to visualize processes such as the heating and cooling behaviour of electronic and mechanical components or other objects over a specified period of time.
Fully radiometric infrared videos in real time (with optional professional upgrade) Fully radiometric real-time videos on your PC, connected to the thermal imaging camera via a fast USB 2.0 interface, enable the detailed examination of thermal processes. All temperature information of each individual image sensor are contained in the video for evaluation.
Integrated 5 megapixel digital camera Quicker and easier object inspection thanks to simultaneous display and recording of fully radiometric infrared and high-resolution real images.
Integrated photo lamp Improved photo results due to optimum illumination of dark target areas during real image recording.
Facility for optional connection of additional lenses via bayonet connection In most situations the standard lens is the best solution, but with some applications a different field of view is required. In contrast to cameras with fixed lenses, when examining particularly small or large objects here you can simply connect telephoto or wide-angle lenses as required – simply use the bayonet coupling with automatic lens detection.

 standard equipment

 optionally available

 not available