Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Electronic pressure switch TDP DS
Electronic pressure switch TDP DS
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Pressure switches
  5. TDP DS

Electronic pressure switch TDP DS / TDP DSA

Automatic control and reliable dry-run protection for deep well pumps, garden pumps and water pumps without mains plug

Ideal for the automatic domestic water supply and service water utilization in your house and garden

The electronic pressure switch TDP DS from Trotec is the reliable solution for the automatic control of deep well pumps, garden pumps, centrifugal pumps or water pumps without an individual mains plug – perfect, for instance, for watering the garden, implementing the domestic water supply, water delivery, draining quantities of water from a pool, or for carrying out cleaning work.

Provides for constant water pressure in the pipe system

The compact Trotec pressure switch is installed between your pump and the consumer connected (e.g. tap or garden hose) and the water delivery takes place automatically without manual switch-on and switch-off of the pump. In the pipe system connected the pressure switch ensures a constant water pressure for garden irrigation or domestic water supply. The pressure switch constantly monitors the pressure in the pipe. When the pressure drops, the device switches on automatically and re-establishes the pressure. When the pipe pressure is reached again, the pump control switches off automatically. In this way, the pump is preserved and its lifetime is extended. Both the water inlet and the water outlet are provided with an external thread with a diameter of 1". This makes the pressure switch compatible with common connections of pumps, hoses or tubes.

The solutions for pumps without a mains plug

The pressure switch is equipped with an open cable end and a mains plug. The power supply of the pump connected is implemented via the 1,100 W pressure switch TDP DS. For this purpose, the mains cable of your pump or of the external control box must be connected to the open cable end of the pressure switch. Note: Please note that the connection of the power supply should only be carried out by trained specialist staff. When the pressure switch has been connected to the pump via mains cable and integrated into the pipe system, you just have to connect the mains plug of the pressure switch to your domestic socket. Your water pump is now supplied with power via the pressure switch and automatically regulated by the TDP DS without requiring any maintenance.

The TDP DS turns your water pump into a domestic water supply system

The pressure switch TDP DS is not only the ideal solution for the use in the garden –you can also use this automatic pump control to upgrade your already existing water pump to a domestic water supply system which will then make it possible for you to use service water, for example for flushing the toilet, operating the washing machine or for working the shower. The electronic pressure switch provides for a constant water pressure in the pipe and protects the pump connected against damage from running dry, water hammers or overheating. The convenient and compact Trotec pressure switch is designed for a maximum working pressure of 10 bar. The current water pressure in bar can be read off from its integrated pressure gauge. The robust plastic housing is protected against splash water from all sides as per IP54 type of protection. The TDP DS matches almost all common pump systems without an individual pressure switch and without mains plug. Furthermore it is the ideal supplement for the Trotec's deep well pumps of the TDP series and the Trotec garden pumps of the TGP series.

This is how the automatic pump control via pressure switch works

Pressure switches are also referred to as automatic pump control, automatic pressure unit, pressure monitor, pressure control, flow monitor or flow control. Their operating principle, however, is always the same: an electronic pressure switch monitors both the water pressure and the flow rate in the water line. If you draw water at the consumer, the pressure in the pipe drops and a flow is recorded by the pressure switch. This automatically switches on the pump connected. When you turn the consumer off again, the water pressure in the pipe increases and the flow ceases. The pump is switched off again automatically by the pressure switch. This preserves the pump and its lifetime is extended. The pressure switch is designed for a working pressure in the pumping system of up to 10 bar and for clear fresh water with a temperature of up to 60°C.

With a dry-run protection to ensure a longer lifetime of the pump

For the case that there's not enough water in your well, in the pond, the cistern or the reservoir, the integrated dry-run protection of the pressure switch is activated and automatically stops the pump. When the pressure in the pipe drops too heavily and the water flow is less than 2 litres per minute, the TDP DS recognizes the risk of running dry and reliably switches off your pump. Continuing operation that is unnecessary is actively prevented by the pressure switch and the pump is protected against damage by running dry and overheating. This mechanism furthermore makes it possible for the pressure switch to detect whether there is a leak in the water line. After an LED error message by running dry, the pump can be easily restarted by pressing the Reset button on the operating panel of the pressure switch.

Including backflow stop

The electronic pressure switch TDP DS comes equipped with a non-return valve that prevents the backflow of water and protects the pump from pressure shocks and pressure surge effects. The integrated backflow stop permits the water delivered to only flow into one direction in the pipe system connected.

By the pressure of the flowing water the closing element of the swing check valve is opened. When the pump is switched off and the water pressure drops, the remaining water in the hose presses the shut-off element into the opposite direction, closes the outlet and in this way prevents the water to keep flowing. 

Various applications in your home or garden

The pressure switch TDP DS from Trotec is for example ideal for the following applications:

  • Garden irrigation via hose, micro-drip system or sprinkler
  • Allows for refitting your pump to a domestic water supply system for providing service water to flush toilets and work washing machines or showers
  • Delivery of water from wells, ponds, streams, cisterns or basins
  • Draining swimming pools, garden ponds or rain barrels
  • Washing the car or cleaning using a high-pressure cleaner 

Whatever your application may be – with the electronic pressure switch TDP DS from Trotec you benefit from convenient and reliable water pressure regulation without having to switch your pump on and off manually every time.

Universally applicable with common water pumps and the following Trotec models:

The pressure switch TDP DS can be easily used for a variety of commercially available water pumps and pumping systems – either via hose connection or directly at the pump head.

TDP deep well pumps from Trotec
If you also wish to rely on Trotec brand quality where your deep well pump is concerned, we recommend using our models TDP 5500 E and TDP 7500 E. Here the pressure switch is switched downstream of the pump via hose connection and the open end of the pressure switch mains cable is connected to the deep well pump control box.

TGP garden pumps from Trotec
The TDP DS pressure switch also works with our garden pumps TGP 1000 E, TGP 1000 ES or TGP 1005 E. With these models you can for example easily screw the pressure switch onto the water outlet in the pump head. To provide for the power supply, the open end of the pressure switch mains cable must be-connected to the pump. As an especially practical plug & play solution we recommend using the pressure switch TDP DSP with its convenient mains power socket as an alternative for our garden pumps.

Pumps with a power of up to 2,300 watts can be provided with a single-phase connection to the pressure switch TDP DS. With a three-phase connection, a pump capacity of up to 4,000 watts can be achieved.

Electronic pressure switch TDP DS – special equipment features

Pressure switch TDP DS – dimensions
With the electronic pressure switch TDP DS you can automatically control the operation of a deep well pump, garden pump or water pump. As a function of the available water pressure and the flow rate the pump connected is switched on or off by the pressure switch.
Pressure switch TDP DS – installation
The pressure switch can be connected to commercially available deep well pumps, garden pumps or water pumps, either directly or via hose or pipeline. The power supply of the pump or the pump control box is provided via the pressure switch. For this purpose the TDP DS is equipped with a 45-cm mains cable with an open cable end and a 100-cm mains cable with a mains plug.
Pressure switch TDP DS – perspective
If the water pressure drops, the pressure switch automatically switches on the pump, and when the maximum pump pressure is reached, it switches the pump off again. The integrated dry-run protection prevents the pump from being damaged if the pumping medium is missing. In addition, the pressure switch is equipped with a backflow stop.
Pressure switch TDP DS – perspective
If the water pressure drops, the pressure switch automatically switches on the pump, and when the maximum pump pressure is reached, it switches the pump off again. The integrated dry-run protection prevents the pump from being damaged if the pumping medium is missing. In addition, the pressure switch is equipped with a backflow stop.
Pressure switch TDP DS – LED operating panel
The operating panel provides the following LED displays: POWER ON – the pressure switch is switched on, ALARM– the pump was for example switched off because it was running dry, PUMP ON – the pump connected is active, RESET – the pump is restarted after an error message.
Pressure switch TDP DS – IP54 type of protection
The robust plastic housing of the electronic pressure switch TDP DS is reliably protected against spray water from all sides as per IP54 type of protection.
Pressure switch TDP DS – 1"-connections
The inlet and outlet nozzles at the pressure switch are equipped with 1“ external threads and therefore perfectly match conventional pump, hose or pipe connections.
Pressure switch TDP DS – pressure gauge
On the pressure gauge with its concise design the current pipe pressure is shown in a clearly visible fashion in the measuring unit bar. The scale ranges from 0 to 10 bar.
Pressure switch TDP DS – adjustable switch-on pressure
The switch-on pressure can be adjusted to a value between 1.5 bar to 2.5 bar on the rear of the pressure switch by means of a setting screw. The default pressure preset by the factory is 1.5 bar. The pressure switch is designed for a working pressure in the pipe system of up to 10 bar.

Technical data by comparison

All pressure switches in direct comparison:

To find the pressure switch which exactly meets your requirements, please consult the concise overview of all pressure switches from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Automatic switch-on/switch-off of commercially available deep well pumps, garden pumps and water pumps
  • Pump control via water pressure and flow rate
  • Provides for a constant water pressure of the domestic water supply or garden irrigation
  • For pumps without a mains plug: Pressure switch with an individual mains plug and an open mains cable end for implementing the connection to the pump's power supply (to be carried out by specialist staff)
  • Designed for a working pressure of up to 10 bar
  • Two connections with conventional 1" external threads
  • Dry-run protection – switches off the pump when there is not enough water
  • With non-return valve – prevents water backflow
  • Integrated pressure gauge (bar)
  • Indication of the operating status via LED
  • Delivery head up to 23 metres
  • Adjustable switch-on pressure between 1.5 and 2.5 bar
  • Protection type IP54 – splash-proof against spray water from all directions
  • Suitable for clean fresh water up to 60 °C
  • Robust housing for a long service life

Clean water
Ground water
Powerful 1,100 W motor
Minimum flow rate of 180 litres per hour
Feed pressure of 1.5 – 2.5 bar
Delivery head of 23 metres
1" threaded connection
0.45 & 1 cable length
Protection type IP54 – sealed against spray water from all directions
For the application in swimming pools
For the application in garden ponds
For the application in wells

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: These are quality features of Trotec products. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!



At a glance: Which pressure switch matches my pump?

 
Pushbutton switch TDP DSP TDP DSA TDP DS
Benefits For automatic pump control. Provides for constant water pressure in the pipe. Offers protection against running dry and in this way extends the service life of the pump.
Mains connection to the pump With integrated socket.
Plug & play: Just connect the mains cable of the pump to the socket in the pressure switch.
No specialist staff required to carry out the mains connection!
With open cable end.
For the mains connection of pumps without an individual mains plug.
Mains connection to be carried out by specialist staff only!
Netzkabel am Druckschalter
Suitable for garden pumps, deep well pumps and water pumps WITH mains plug deep well pumps, garden pumps and water pumps WITHOUT mains plug

All of Trotec's pressure switches at a glance

 standard equipment

 optionally available

 not available

 standard equipment

 optionally available

 not available

Buy

Electronic pressure switch TDP DS without plug show in Trotec online shop

Electronic pressure switch TDP DS without plug

You save: 9 %

41.95 £ 37.95 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 4.610.000.290
Electrical values
  Mains connection 220 - 240 V, 50/60 Hz
  Power input [W] 1,100
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1
  Socket
Performance data
  Max. delivery height [m] 23
  Start-up pressure 1.5 bar – 2.5 bar
  Operating pressure [bar] 10
  Max. water temperature [°C] 60
Ambient conditions
  Ambient temperature - min. [°C] 0
  Ambient temperature - max. [°C] 55
Safety feature
  Type of protection IP54
  Protection class I
Functions and features
  Pressure spring Steel
  Drive hydraulic
  Suitable for 1-phase pumps
  Dry run protection
  Pressure gauge
  Continuous operation
  Backflow preventer
  Threaded connection 1"
Housing design
  Nylon housing
Control panel
  Membrane keys
Dimensions
  Length (packaging excluded) [mm] 125
  Width (packaging excluded) [mm] 153
  Height (packaging excluded) [mm] 165
Weight
  (packaging excluded) [kg] 1

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...