Any questions?
We are happy to provide further information available.
| Business: | +49 2452 962 400 |
|---|---|
| Industry: | +49 2452 962 777 |
| End-consumers: | +49 2452 962 450 |
| E-mail: | online-uk@trotec.com |
|---|
Stainless steel desiccant dehumidifier TTR 250
The TTR 250 guarantees reliable adsorption air dehumidification in the corrosion-resistant stainless steel housing
The low-maintenance TTR 250 stainless steel desiccant dehumidifier does not only guarantee high dehumidification values especially at low dew points. Its housing is also known for a high corrosion resistance and good hygiene characteristics.
The TTR 250 is therefore perfectly suitable for humidity regulation in production and storage areas as well as for protection against corrosion and condensation in all humidity-sensitive environments and facilities where special hygienic standards apply or where there are extremely material-straining atmospheres.
In addition to integrated heat recovery, the standard equipment of this ready-to-install desiccant dehumidifier ”made in Germany” also includes a self-regulating electronic regeneration air heating consisting of thermistor elements (PTC) whose performance capacity depends on air inlet temperature and regeneration air volume.
The advantage of this solution lies for one in an optimal performance matching and in the fact that overheating is not possible, making a safety thermostat superfluous.
With the TTR 250 you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany.
A few practical benefits:
- Professional quality ”made in Germany” –
Originally produced by Trotec - Corrosion-resistant stainless steel housing
- Reliable silica gel sorption rotor in washable and mechanically high-tensile finish
- Integrated heat recovery
- Self-regulating PTC heating
- Ampere meter to control the operating condition
- Operating hours counter
- Dual counter with additional MID-compliant* registration of the power consumption (optional)
- Space-saving and stackable
 |
 |
* What does MID compliant mean?
The European Measuring Instruments Directive (MID) has replaced the existing rules of national approval and subse-quent calibration in some areas. As a result, all power meters, which are used for energy consumption billing, must be MID compliant in the future.
Shop
TTR 250 Desiccant Dehumidifier
This dehumidifier works according to the adsorption principle. This not only guarantees high levels of performance and reliability but also means that it can be used where temperatures are very low. The self-regulating regeneration air heating ensures optimium performance adaptability.
1,797.26 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.110.000.130 | |
| Dry air (in case of intake air 20°C / 60 % RH) | ||
| Dehumidification [kg/24h] | 26.4 | |
| Dehumidification [kg/h] | 1.1 | |
| Min. air volume [m³/h] | 130 | |
| Max. air volume [m³/h] | 300 | |
| Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h] | 250 | |
| External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa] | 100 | |
| Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH) | ||
| Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm] | 100 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 50 | |
| External compression | Regeneration air [Pa] | 100 | |
| Connection outlet Ø | Regeneration air [mm] | 80 | |
| Operating principle | ||
| Operating principle | TTR Bisorp Mono | |
| Operating range | ||
| Min. temperature [°C] | -20 | |
| Max. temperature [°C] | 35 | |
| Min. humidity [% RH] | 0 | |
| Max. humidity [% RH] | 100 | |
| Electrical values | ||
| Mains connection | 230 V/50 - 60 Hz | |
| Nominal current consumption [A] | 5.7 | |
| Power input [kW] | 1.3 | |
| Power input heating [kW] | 1.2 | |
| Recommended fusing [A] | 16 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Cable length [m] | 2.5 | |
| Sound values | ||
| Distance 1 m [dB(A)] | 57 | |
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 410 | |
| Width (packaging excluded) [mm] | 350 | |
| Height (packaging excluded) [mm] | 435 | |
| Weight | ||
| (packaging excluded) [kg] | 19 | |
| Equipment, features and functions | ||
|---|---|---|
| Housing type | ||
| Stainless steel | ||
| Metal | ||
| Powder coating | ||
| Plastics | ||
| Metal plastic composite housing | ||
| Coating | ||
| Mobility | ||
| Non-marking rubber feet | ||
| Carry/transport handle(s) | ||
| Transport frame | ||
| Swivel casters with brake | ||
| Trestle rollers/ fixed castors | ||
| Non-marking rubber wheels | ||
| Stacking device | ||
| Crane lifting gear | ||
| Forklift pockets | ||
| Equipment | ||
| Operating hours counter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Integrated heat recovery | ||
| Self-regulating PTC electric heating | ||
| Air volume regulation | ||
| Moisture control | ||
| Moisture and temperature registration | ||
| Sensor-supported Flowmatic control | ||
| Variable-speed rotor drive | ||
| Filter monitoring | ||
| Terminals for external ON/OFF | ||
| Power meter | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Regeneration heating design | ||
| Electric PTC | ||
| Device version | ||
| Indoor installation (standard) | ||
| stackable | ||
| Shelter against the weather | ||
| Hiring model | ||
standard equipment
optionally available
not available