Designer air cleaner AirgoClean® 200 E
3-in-1 design HEPA air cleaner with ionisation – honoured with the renowned Red Dot Design Award.
Breathe clean air, strengthen your health
With its device body made of polar white and brushed stainless steel, the AirgoClean® 200 E design air cleaner makes a clear statement against any form of air pollution. The timelessly beautiful design was awarded the coveted Red Dot Design Award. The jury was right to find:
"The design of the air cleaner also visually represents its cleaning function. The unobtrusive shaping and the rounded corners give it a harmonious, clear appearance."
There is no more visually appealing way to integrate purified air into a modern living environment in order to recover from the stress and strains of the day and to regain vital energy by means of hygienically clean air.
Clean air is quality for life – but not a matter of course.
The room air in times of our industrialised society is much more contaminated with pollutants than the outdoor air. However, the outside air is anything but healthy due to inner-city concentrations of fine dust. This fact makes it even more important to provide for clean and unpolluted air in the direct surroundings. The AirgoClean® 200 E design air cleaner undertakes this responsible task with maximum efficiency.
Unpleasant dust can be found anywhere and functions like a magnet when attracting other pathogens: Allergens, bacteria, viruses, fine dust, mould, pollen, dust mites, animal dander and odours pollute the room air. There are also harmful fine dust particles that enter our comfort zone through open doors and windows. We inhale these particles when breathing in the air in interior spaces – where they promote the development of numerous diseases.
The AirgoClean® 200 E improves air quality and provides protection from diseases - removes 99.97 % of airborne allergens
Protect yourself and your environment with HEPA-filtered clean air that is 99.97 % free from pathogenic suspended particles. If desired, you can benefit from fully automatic air cleaning thanks to state-of-the-art air quality sensors. The "air quality sensors" of the AirgoClean® 200 E continuously measure the fine dust pollution and the quality of the room air in order to clean it with intelligently controlled performance. The four-stage adjustable ventilation with a maximum air circulation rate of 550 m³/h allows for a noticeable improvement of the air quality in rooms sized up to 66 m² or 165 m³.
High-performance HEPA filter technology combined with user-friendly handling characteristics
The AirgoClean® 200 E air cleaner combines award-winning design, powerful HEPA filter technology and guarantees an extremely simple operation. The modern LED display indicates the fine dust value and the quality of the room air in real time, a five-stage bar graph indicates when a filter change is required. The convincing features of the AirgoClean® 200 E are completed by three operating modes (automatic, turbo and night mode).
Coloured air quality indicator displaying the PM2.5 value
The air quality display in the centre of the AirgoClean® 200 E makes the otherwise invisible but harmful particulate matter pollution and other forms of pollutants visible in the room air. The PM2.5 value (number of fine dust particles < 2.5 µm) and the quality of the room air can be read from the dimmable LED display – even from greater distance. A colour ring provides clearly visible information on the air quality in three different colours:
In automatic mode, the fan speed and the associated air cleaning performance are controlled depending on the air quality:
| Blue: Good air quality | PM2.5 value 0 – 75 |
| Orange: medium air quality | PM2.5 value 76 – 150 |
| Red: Poor air quality | PM2.5 value > 150 |
What is the PM2.5 value?
The PM2.5 value indicates the number of respirable fine dust particles with a diameter of less than 2.5 µm. Due to their small size, these fine particles are considered a health risk because they can penetrate deeper into the airways, the cardiovascular system and the brain, remain there and cause damage. As part of the REVIHAAP project, the WHO has come to the conclusion that fine dust can lead to arteriosclerosis, impair births and trigger respiratory diseases in children, among other things.
Automatic mode for intelligently controlled cleaning performance
The quality of the air in a room can have both positive and negative effects on our well-being, our productivity and especially our health. With the AirgoClean® 200 E you can rely on obtaining clean and purified air for breathing healthily. In comfortable automatic mode, the air cleaner automatically reduces airborne health risks in your surroundings.
Combined indication of fine dust and air quality with real-value display of the PM2.5 value
The air purification capacity cannot only be controlled manually in 3 levels. In addition, the AirgoClean® 200 E is equipped with a comfortable automatic mode. Highly sensitive "air quality sensors" measure the room air quality and the air pollution with particulate matter in real time which allows them to react immediately to any changes.
You can count on the reliability of the AirgoClean® 200 E.
The highly sensitive air quality sensors measure the air pollution by particulate matter and gaseous pollutants (VOC). The smallest changes are immediately recognised – the device is able to react immediately by adapting the air purification process. The air flow rate and filter performance of the device are regulated fully automatically to the necessary level to remove suspended particles from the room air within a very short time.
| Virus filtration SARS-CoV-2 | HEPA | |
|---|---|---|
| 6 air changes suitable for rooms sized up to | maximum | 36 m2 / 91 m3 |
| Recommendation by Trotec* | 18 m2 / 45 m3 | |
| 10 air changes suitable for rooms sized up to | maximum | 22 m2 / 55 m3 |
| Recommendation by Trotec* | 11 m2 / 28 m3 | |
| CADR values | ||
| Fine dust, pollen, animal hair (CADR) | maximum | 66 m2 / 165 m3 |
| Recommendation by Trotec* | 32 m2 / 80 m3 | |
* Usually, the maximum value is advertised as the "recommended room size". In order to achieve a good combination of air pollution control and background noise, the room sizes we recommend are based on a sound level of approx. 38 dB(A).
Automatic mode and virus filtration:
Do not use the automatic mode if the device is used for virus filtration. The integrated sensors only respond to air pollution caused by fine particulates, pollen or VOC. The device cannot determine the virus load. It is possible that the automatic mode indicates a "good" air quality even though the virus load in the room is very high. For this reason we recommend using the fan stage requested by the respective specifications with regard to the circulation rate (air volume) when the device is used for virus filtration in order to reduce the risk of indirect infections.
Turbo mode for an accelerated air cleaning procedure
Do not wait for better times to take a deep healthy breath – become active yourself. The AirgoClean® 200 E with its high air flow rate ensures fast cleaning results and HEPA-filtered clean air in the entire room. Thanks to the perfect combination of an optimised air flow principle and a powerful drive, the design air cleaner helps to achieve healthy room air with improved air quality in an impressively fast manner.
Turbo-mode for accelerated ventilation of the room
To enjoy some valuable quality time with your loved ones, the quality of the room air must be right in addition to a good work-life balance. Only then can the body is able to recharge its "batteries" with clean air. By means of the turbo mode of the AirgoClean® 200 E, you'll be able to clean the air in the living room, bedroom or children's room as well as in the office or medical practice room in no time. Animal hair and unpleasant animal odours as well as pollen (farina) and spores introduced from outside are filtered out of the room air in the shortest of time, without having to leave doors or windows open and letting precious and unused heating air escape through open windows. A meeting, break or staff room can be aired just as quickly and easily. Even if there is not a living soul in the room after it has been used, germs causing diseases may still hover around in the air – invisible to the naked eye. In acute situations, the turbo mode of the AirgoClean® 200 E allows to quickly and effectively remove airborne pollutants and suspended particles from the room air. In medical practices, this function is ideal for providing clean air after each treatment.
Dual-gravity centrifugal impeller with flow-optimised airflow
The vertical dual-gravity centrifugal impeller of the high-efficiency fan allows for a constantly high airflow with low noise emission. The polluted room air is sucked in near the ground via the air inlets on the sides of the device. The air then passes through the combined DACRON, HEPA and CARBON filter technology compartments inside the device. The clean and pollutant-free air is then blown back into the room via the flow-optimised blow out flaps on the top of the device. By means of air circulation, the air will distribute and spread pleasantly throughout the room.
Convincing comfort equipment: More than you'll expect
The design air cleaner AirgoClean® 200 E combines outstanding design, powerful 3-in-1 HEPA filter technology and comfort equipment that just makes you happy. In this device class, these features are only available with the air cleaners of the AirgoClean® series.
Light detection function with automatic air flow control
When ambient brightness decreases, e.g. if the lighting is switched off or dusk starts to fall, the digital display switches off and the fan stage is reduced to provide a quiet sleeping environment.
Filter change and filter cleaning indication
Two five-stage bar graphs provide information about the degree of contamination of the prefilter and HEPA/carbon filter. Once the two preassembled HEPA/carbon filters need to be replaced or the prefilters need to be cleaned, a warning message (Replace or Clean) appears on the digital LED display.
Timer with automatic switch-off function
The easily programmable timer makes it possible to set a fixed operating time. The number of hours until automatic switch-off can be set to 12, 24, 48 or 72 hours. Just as your work-life balance requires – unnecessary operating times can also be avoided.
Memory function
After a power interruption, the selected settings for the operating mode and fan speed are saved. The timer setting is not saved.
Night mode with reduced fan stage and low background noise
Clean, filtered room air even during sleep is made possible by the night mode with reduced noise emission with deactivated air quality indication. The air current is automatically adjusted to the requirements of a healthy sleep automatically and the air flow rate is set to the lowest fan stage.
Health is a valuable asset. Protect yourself and your loved ones with clean, purified air. The design air cleaner AirgoClean® 200 E makes it possible.
Double 3-in-1 HEPA filter technology with ionisation function to provide for a healthy room climate
Thanks to the combined filter system with HEPA carbon and pre-filter technology on both sides of the device and an additional ionisation function, fine particles, allergens and other pathogens are reliably filtered from the room air.
2 x HEPA filter (99.97 %)
Viruses, bacteria, pollen, allergens, fine dust particles and mould spores sized down to 0.3 micrometres are eliminated in both HEPA filters. Due to the high filtration efficiency of 99.97 %, filters of this filter class are used e.g. in hygiene-sensitive laboratories and in the food production industry. These filters provide optimum conditions to turn your own four walls into an oasis of well-being with clean, fresh and filtered room air.
Double carbon filter (activated carbon filter)
Perfect for smokers: the additional filter consisting of carbon. In addition to pollutants, this activated carbon filter effectively neutralises tobacco odours, pet odours, kitchen and smoke odours as well as formaldehyde and solvent odours from the ambient air. For clean air – without unpleasant odours.
Ionisation
The filter performance is already extremely efficient, but even more increased by fully automatic ionization. In the course of the ionization process, negatively charged ions are released. Their static charge binds all pollen, dust, viruses and bacteria. As a result, these particles sink down to the ground where they will be immediately drawn in by the air current of the four-stage fan to be eliminated in the end. This way, the room air is cleaned even more effectively and additionally enriched with active oxygen.
Quick and simple filter change
The AirgoClean® 200 E is just as easy to operate as it is to change the pre-mounted filters, which can be done in no time. In one simple step, the device covers of both sides can be removed without using tools. This way, prefilters and HEPA filters can be visually inspected and replaced if necessary.
AirgoClean® 200 E – special equipment features
Fresh, clean air – Anywhere you need it
All AirgoClean® air cleaners in direct comparison:
To find the air cleaner which exactly meets your requirements, please consult the concise overview of all air cleaners of the AirgoClean® series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Winner of the renowned Red Dot Design Award
- High-quality design made of brushed stainless steel and rounded corners
- Multi-stage room air filter system with pre-filter, combined HEPA carbon filter (99.97 %) and ionisation
- Highly efficient HEPA filtration of fine dust particles, suspended particles, pollutants, germs and odours
- Combined air quality indicator in LED colours with real-value display of fine particles (PM 2.5 value)
- Suited for fully automatic air purification in rooms sized up to 66 m2 or 165 m3
- Purification volume max. 550 m³/h
- 4 fan stages
- 3 operating modes Automatic mode, turbo mode, night mode
- Compactness and high performance combined with simple operation
- Uncomplicated, quick filter change
- Light detection function
- Timer function
- Memory function
- Indicator lights for filter
- Night mode (reduced noise emission)
- Low energy consumption
- Suitable for allergy sufferers
You are looking for air cleaners for professional health protection for continuous commercial applications?
Our high-performance air purifiers of the TAC series and the AirgoClean® One enable highly effective room air purification by means of an H14 HEPA filter system certified according to EN 1822, as commonly required by hygiene concepts. This is why they are recommended by numerous leading research associations to reduce the airborne infection risk from virus-laden aerosol particles to a minimum, and why they are used all over the world by top companies, in schools, ministries and health facilities.
While the AirgoClean® One is our number 1 high-performance air purifier to produce virus-filtered clean air in smaller shops, offices, medical practices, law firms or exclusive private rooms, we recommend using our high-volume TAC high-performance air purifiers for effective air purification in highly frequented medium-sized and larger rooms. They are the world's first room air cleaners that have been developed explicitly for filtering out virus-laden aerosols in interior spaces. In addition to the mobile version for easy changes of location, all TAC models are also available as a stationary version – providing a clean design solution for clean air on the spot!
TAC high-performance air purifiers are the perfect solution for effective virus filtration in larger rooms:
standard equipment
optionally available
not available
Buy
/en_GB/1580001045/Design-Air-Cleaner-AirgoClean%C2%AE-200-E-132026-1613039062.jpg)
Design Air Cleaner AirgoClean® 200 E
You save: 120.00 £
229.95 £
109.95 £
incl. VAT
Show net price (VAT not included)
Details
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.580.001.045 | |
| Air flow rate | ||
| Suitable for rooms sized up to [m²/m³] | 66 m² /165 m³ | |
| Level 1 [m³/h] | 179 | |
| Level 2 [m³/h] | 267 | |
| Level 3 [m³/h] | 433 | |
| Level 4 [m³/h] | 550 | |
| Electrical values | ||
| Mains connection | 220 - 240 V, 50 Hz | |
| Power input [kW] | 0.038 | |
| Nominal current consumption [A] | 0.17 | |
| Electric connection | ||
| Connection plug | CEE 7/17 | |
| Cable length [m] | 1.8 | |
| Sound values | ||
| Level 1 - Distance 1 m [dB(A)] | 31 | |
| Level 2 - Distance 1 m [dB(A)] | 38 | |
| Level 3 - Distance 1 m [dB(A)] | 49 | |
| Level 4 - Distance 1 m [dB(A)] | 54 | |
| Fan | ||
| Radial | ||
| axial | ||
| stages | 4 | |
| Safety feature | ||
| Protection class | II | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 310 | |
| Width (packaging excluded) [mm] | 310 | |
| Height (packaging excluded) [mm] | 680 | |
| Weight | ||
| (packaging excluded) [kg] | 10.5 | |
| Equipment, features and functions | ||
|---|---|---|
| Equipment | ||
| Air quality sensor | ||
| Air quality sensor (VOC) * | ||
| On / off switch | ||
| Digital display | ||
| Touchscreen | ||
| Dust sensor | ||
| Air quality display | ||
| Light detection function | ||
| PM2.5 detection | ||
| Timer function | ||
| Child lock button | ||
| Ionization | ||
| Turbo mode | ||
| Automatic operation | ||
| Night mode | ||
| Dimmable display | ||
| Filter reset | ||
| Memory function | ||
| Filter change indication | ||
| Main filter | ||
| Pre-filter | ||
| Filter | ||
| Pre-filter | Synthetic fibre | |
| HEPA filter | HEPA carbon filter | |
| efficiency | 99,97% | |
| Mobility | ||
| Feet | ||
| Carry/transport handle(s) | ||
| Housing design | ||
| Plastics | ||
standard equipment
optionally available
not available