T660 material moisture measuring device
Professional hand-held measuring device for the quick, non-destructive determination of moisture distributions in near-surface areas
The T660 is ideally suited for the quick, non-destructive determination of moisture distribution in near-surface areas to about 4 cm.
Based on the T660's integrated material pre-selection function for anhydrite and cementitious screed the measurement results (indicative) can on demand be shown directly in mass % or CM % on the colour display of the T660.
The integrated conversion of measured values is a practical tool, in particular for floor layers to quickly check the readiness for covering.
In addition to the preliminary check of the building materials' readiness for covering for CM measurements the T660 is also suited for non-destructive wood moisture measurements according to the dielectric measurement method (indicative).
Brilliant large-digit display
The T660 comes equipped with particular display glass ensuring high-contrast presentation even in bright sunlight as well as enabling the quick and reliable detection of the moisture distribution in wall or floor areas when combined with the large-digit, real-time measurement value display.
Integrated alarm function
Handy and time-saving: Prior to measuring you can define an individual limit value in the T660's settings. Should this alarm limit value be exceeded in the course of measuring, an acoustic warning signal is emitted automatically.
This way, large wall and floor areas can be measured quickly and effectively. During measuring, you can focus exclusively on the measuring object without the need to permanently keep an eye on the displayed measuring results.
Also ideally suited for combined building diagnostics measurements using the material moisture measuring device T610
Owing to the combined measurement of near-surface moisture with the T660 and of sub-surface moisture with the T610, complex correlations can be distinguished, narrowed down and classified, e.g. hygroscopic humidity occurrences resulting from salinization or leak detection. In the course of this the T660 captures the topmost two to four cm of the construction material and the T610 measures the volume moisture values to a depth of 30 cm.
Significant results regarding a multi-dimensional moisture distribution can be obtained via grid measurement based on surface and sub-surface moisture measurement values. With an active USB connection to the measuring device the MultiMeasure Studio software included in the scope of delivery provides a convenient assistance function for the creation and visualization of grid measurements.
Finally one software for basically all measuring devices
As optionally available Professional version MultiMeasure Studio offers yet more possibilities and is not only perfectly suitable for fully compatible devices like the T660.
Owners of partially compatible or isolated measuring instruments can also benefit from this software, since it enables the analysis and administration of all measuring projects and customer data across multiple devices in a single application!
Using the unique report generating function you can create professional measurement reports in a trice:
Numerous boilerplate texts for building diagnostics, moisture measurement, leak detection and thermography are already included completely formulated (German version only).
Interested? Here you can access all information on the Professional version...
 |
 |
A few practical benefits:
- Measuring device designed and produced according to the highest quality standards in Germany
- German industrial design in robust, premium two-component construction with IP54 type of protection
- Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
- Capacitive touchscreen control panel
- High-resolution colour display for simultaneous indication of two measured values
- For the quick and non-destructive determination of near-surface moisture distributions to up to 4 cm
- Moisture alarm function
- Material pre-selection for anhydrite and cementitious screed
- Direct display of measured values possible in mass % or CM %
- Grid measurement function via USB with active software connection
- Incl. MultiMeasure Studio measurement data management software (standard download version)
standard equipment
optionally available
not available
Shop
/en_GB/3510207650/T660-Moisture-Meter-114360-1578391680.jpg)
T660 Moisture Meter Sold out
229.95 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.207.650 | |
| Wood moisture [%] | ||
| Min. measuring range | Wood moisture [%] | ||
| Max. measuring range | Wood moisture [%] | ||
| Resolution | Wood moisture [%] | ||
| Accuracy | Wood moisture [%] | ||
| Min. temperature compensation [%] | ||
| Max. temperature compensation [%] | ||
| Measuring principle | ||
| Material moisture [%] | ||
| Min. measuring range | Material moisture [%] | ||
| Max. measuring range | Material moisture [%] | ||
| Accuracy | Material moisture [%] | ||
| Resolution | Material moisture [%] | ||
| Measuring principle | Capacitive | |
| Min. measuring range [%] | 0 | |
| Max. measuring range [%] | 7.6 | |
| Accuracy [%] ± | Material moisture cementitious screed (combined) | ±0.1 % | |
| Material moisture [digits] | ||
| Min. measuring range | Material moisture [Digit] | 1 | |
| Max. measuring range | Material moisture [Digit] | 200 | |
| Accuracy | 0.1 | |
| Resolution [Digit] | 0.1 | |
| Measuring principle | Capacitive | |
| Max. penetration depth (non-destructive) [mm] | 40 | |
| Display | ||
| LCD | ||
| Device control | ||
| Touch key display | ||
| Push buttons | ||
| Thumbwheel | ||
| Housing design | ||
| Plastics | ||
| Power supply | ||
| Internal (battery) | 4 x 1.5V, AA | |
| Ambient conditions | ||
| Operation - min. temperature [°C] | 0 | |
| Operation - max. temperature [°C] | 50 | |
| Operation – min. relative humidity [% r.F.] | ||
| Operation - max. relative humidity [% RH] | 95 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 209 | |
| Width (packaging excluded) [mm] | 63 | |
| Height (packaging excluded) [mm] | 35 | |
| Weight | ||
| (packaging excluded) [kg] | 0.285 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Battery(-ies) | ||
| Factory test certificate | ||
| Operating manual | ||
| Protective cap | ||
| Electrode tips (1.5 x 20 mm) | ||
| Electrode tips (2.2 x 8 mm) | ||
| 2 x union nuts | ||
| Wood type directory | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Internal sensors | ||
| Material moisture [digits] | ||
| Material moisture [%] | ||
| Wood moisture [%] | ||
| Functions and features | ||
| Maximum value display | ||
| Minimum value display | ||
| Measured value hold function | ||
| Acoustic alarm function | ||
| Automatic functional test | ||
| Automatic battery test | ||
| Display illumination | ||
| Automatic switch-off | ||
| Non-destructive measurement method | ||
| Selection sensor characteristic map (sens) | ||
| Unit 2 | ||
| Selection of wood material characteristics (Mat) | ||
| Temperature compensation | ||
| Manual temperature setting | ||
| Mode selection slide control | ||
| Retaining clip | ||
standard equipment
optionally available
not available