Commercial dehumidifier TTK 75 ECO
Easily (sup)portable investment for dehumidification and dry keeping
Particularly economical solution for typical dehumidification applications in the commercial sector
The TTK 75 ECO, compact and robust in equal measure, is a pragmatic solution when an equally low-cost and high-quality construction dryer is required.
The lightest device of the TTK-ECO series is equipped with cable holders and a retractable metal carrying handle and can so be conveniently transported to the operating site. Thanks to its efficient rotary piston compressor, the low-maintenance device can be transported and stored in any position.
And since the TTK 75 ECO comes with a hardwearing steel construction, a rough construction site environment means no harm to this dehumidifier.
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
High dehumidification performance even at low temperatures
Once arrived at the target location, the TTK 75 ECO is simply switched on and you're done. It immediately withdraws immense amounts of moisture from the room air – and thanks to the automatic hot gas defrosting even does so at low temperatures in unheated rooms.
Owing to the external condensate drain and optionally available condensate pump, the TTK 75 ECO is further ideally suited for longer unattended dry keeping applications, the duration of which can be determined precisely by means of the integrated operating hours counter – perfect for commercial applications.
Special equipment features of the TTK 75 ECO
Application examples from practice:
All commercial dehumidifiers of the TTK-ECO series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-ECO series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Particularly economical solution for typical dehumidification applications in the commercial sector
- High dehumidification performance even at low temperatures
- Robust steel construction
- Portable and easily stored anywhere thanks to its rotary compressor
- Hot gas automatic defrosting
Proper energy billing for existing equipment without meters?
You're still using electrical appliances without MID-compliant energy consumption meters the current consumption of which you have to report to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Fan assistance
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
Accessory tip:
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
standard equipment
optionally available
not available
Shop
/en_GB/1120001110/TTK-75-ECO-Dehumidifier-152502-1662027615.jpg)
TTK 75 ECO Dehumidifier
You save: 20.00 £
349.95 £
329.95 £
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.120.001.110 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 6.4 | |
| At 30 °C / 80 % RH [l/24h] | 20 | |
| Max. [l/24h] | 21 | |
| Air flow rate | ||
| Level Max. | 260 | |
| Recommended room size dry keeping | ||
| m³ | 110 | |
| m² | 45 | |
| Ambient conditions | ||
| Min. temperature range [°C] | 5 | |
| Max. temperature range [°C] | 32 | |
| Min. humidity range [% RH] | 30 | |
| Max. humidity range [% RH] | 90 | |
| Electrical values | ||
| Mains connection | 220 - 240 V, 50 Hz | |
| Nominal current consumption [A] | 1.5 | |
| Power input [kW] | 0.35 | |
| Recommended fusing [A] | 10 | |
| Required current starting phase [A] | 7 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Compressor | ||
| Rotary piston compressor | ||
| refrigerant | R290 | |
| Amount of refrigerant [g] | 100 | |
| Minimum room size [m²] | 4 | |
| GWP factor | 3 | |
| CO2 equivalent | 0.0003 t | |
| Pressure suction side [MPa] | 1 | |
| Pressure outlet side [MPa] | 2.5 | |
| Max. permissible pressure [Mpa] | 2.5 | |
| Water tank | ||
| Contents in [l] | 4 | |
| Sound values | ||
| Level 1 - Distance 1 m [dB(A)] | 46 | |
| Functions and features | ||
| Cable holder | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 295 | |
| Width (packaging excluded) [mm] | 305 | |
| Height (packaging excluded) [mm] | 562 | |
| Weight | ||
| (packaging excluded) [kg] | 20 | |
| Equipment, features and functions | ||
|---|---|---|
| Automatic defrost system | ||
| Hot gas | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Fan | ||
| Radial | ||
| stages | 1 | |
| Condensate tank monitoring | ||
| Container available | ||
| Overflow protection with automatic switch-off | ||
| Filling level warning light to indicate a full water tank | ||
| Room air filter | ||
| Readily accessible | ||
| Cleanable | ||
| Operating hours counter | ||
| Operating hours counter | ||
| Mobility | ||
| Carry/transport handle(s) | ||
| Cable winder | ||
| Feet | ||
| Condensate drain | ||
| Hose connection possible | ||
| Recommended hose size [mm] | 10 | |
| Condensate pump | ||
| Shelf life | ||
| stackable | ||
| Housing design | ||
| Steel coated | ||
standard equipment
optionally available
not available