Commercial dehumidifier TTK 171 ECO
Extremely versatile and powerful – with pressure fan for drying hollows
The classical all-rounder!
Whether you want to dehumidify and dry constructions sites, living spaces, bedrooms, shower and basement rooms, laundry rooms, weekend cottages, caravans, boats, or to continuously keep storage facilities, archives, laboratories, garages, bathrooms, washrooms and changing rooms dry – the powerful dehumidifier TTK 171 ECO is an especially economical solution for many typical commercial dehumidification tasks.
The carriage construction with handle bar, recessed handles and big wheels makes transporting even on difficult terrain or stairways much easier.
For quick start-up the dehumidifier TTK 171 ECO comes with an easy-care control panel with digital display of all functions. For hygrostat-controlled automatic operation the target value can be selected in percentage steps, this value will then be indicated along with the current actual value.
By means of the timer switch-on and switch-off time can be configured and owing to the integrated memory function the settings are saved even after a power interruption.
Permanent mode for construction drying applications
The possibility of connecting an external condensate drain – if required with an optional condensate pump – also makes the TTK 171 ECO ideally suitable for longer unattended dry keeping tasks, e.g. for construction drying.
With an optional air hose connection for drying hollows
In suspended ceilings, in bathtub hollows, in cassette walls or cable ducts – if moisture has entered hollows that are difficult to access, you should act quickly in order to prevent the formation of mould.
As the TTK 171 ECO is equipped with a special pressure fan, the device can also be used for the selective admission of dry air or for drying hollows. To do so, simply attach an air hose to the optionally available adapter connecting piece.
Radial fan with 3.2 MPa air pressure
The air hose can be installed in the hollow via inspection flaps or manually added apertures. With an air pressure of 3.2 MPa on the outlet side, the radial fan mounted in the TTK 171 ECO offers an especially extensive throwing range. The dry air is induced into the hollow via the air hose connected on the air outlet by means of an adapter. The air that has been blown in then escapes again through an aperture that is already available or that has been added manually in the hollow casing, in this way allowing for the moisture to be dried out by and by.
Note: If heavy dirt, dust or even mould has settled in the hollow, the space should not be inhabited or used at the time the drying process is carried out, if possible, since otherwise the dust particles and mould spores may spread everywhere. In this case we recommend additionally using an air cleaner.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
A few practical benefits:
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Fan assistance
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
Accessory tip:
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
All commercial dehumidifiers of the TTK-ECO series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-ECO series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
standard equipment
optionally available
not available
Buy
TTK 171 ECO Dehumidifier
You save: 50.00 £
649.95 £
599.95 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.120.001.125 | |
Dehumidification performance | ||
At 20 °C / 60 % RH [l/24h] | 22 | |
At 30 °C / 80 % RH [l/24h] | 51 | |
Max. [l/24h] | 52 | |
Air flow rate | ||
Level Max. | 450 | |
Recommended room size dry keeping | ||
m³ | 230 | |
m² | 90 | |
Ambient conditions | ||
Min. temperature range [°C] | 5 | |
Max. temperature range [°C] | 30 | |
Min. humidity range [% RH] | 20 | |
Max. humidity range [% RH] | 90 | |
Electrical values | ||
Mains connection | 220 - 240 V, 50 Hz | |
Nominal current consumption [A] | 2.7 | |
Power input [kW] | 0.65 | |
Recommended fusing [A] | 16 | |
Required current starting phase [A] | 15 | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Compressor | ||
Rotary piston compressor | ||
refrigerant | R290 | |
Amount of refrigerant [g] | 230 | |
Minimum room size [m²] | 12 | |
GWP factor | 3 | |
CO2 equivalent | 0.00069 t | |
Pressure suction side [MPa] | 0.7 | |
Pressure outlet side [MPa] | 3.2 | |
Max. permissible pressure [Mpa] | 3.2 | |
Water tank | ||
Contents in [l] | 5.5 | |
Sound values | ||
Level 1 - Distance 1 m [dB(A)] | 52 | |
Functions and features | ||
Continuous operation | ||
LED display | ||
Display of the relative humidity level | ||
Indication of the current room humidity level | ||
Automatic fault diagnosis system | ||
Memory function | ||
Fan rundown function | ||
Dimensions | ||
Length (packaging excluded) [mm] | 525 | |
Width (packaging excluded) [mm] | 490 | |
Height (packaging excluded) [mm] | 900 | |
Weight | ||
(packaging excluded) [kg] | 40 |
Equipment, features and functions | ||
---|---|---|
Automatic defrost system | ||
Electronic | ||
Automatic dehumidification | ||
Non-stop dehumidification | ||
Hygrostat-controlled | ||
Electronic hygrostat | ||
Fan | ||
Radial | ||
stages | 1 | |
Condensate tank monitoring | ||
Container available | ||
Overflow protection with automatic switch-off | ||
Filling level warning light to indicate a full water tank | ||
Room air filter | ||
Cleanable | ||
Readily accessible | ||
Timer function | ||
Switch-on time preselectable | ||
Switch-off time can be preselected | ||
Mobility | ||
Carry/transport handle(s) | ||
Non-marking full-rubber wheels | ||
Cable winder | ||
Feet | ||
Carriage design | ||
Condensate drain | ||
Hose connection possible | ||
Recommended hose size [mm] | 11 | |
Condensate pump | ||
Control panel | ||
Digital display | ||
Membrane keys | ||
Housing design | ||
Steel coated |
standard equipment
optionally available
not available