Commercial dehumidifier TTK 165 ECO
Low-priced dehumidification of up to 52 litres
Strong performance - efficient solution!
When it comes to efficiency, hardly any other device can keep up with the low-cost solution TTK 165 ECO. The dehumidifier manages about 52 litres in 24 hours – an impressive drying performance for the commercial sector.
The TTK 165 ECO is equipped with an external condensate drain – with an optional external pump if required – and is thus perfectly suited for longer unattended drying operations. Besides, the condensate tank can be removed and thus quickly and easily emptied.
Thanks to the carriage design steel construction with a transport handle and large wheels, the TTK 165 ECO can be moved without difficulty even in the often harsh surroundings on construction sites. The convenient cable holders on the rear of the device offer additional transport safety.
The TTK 165 ECO is immediately ready for operation, easy to use and ideally suited for continuous dehumidification. In addition, the commercial dehumidifier is equipped with an efficient rotary piston compressor allowing for simple transport and storage in every position.
Propane (R290) as environmentally friendly refrigerant in dehumidifiers
Every year, several million tonnes of environmentally harmful CO2emissions (greenhouse gases) are emitted into the air by synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant, this dehumidifier makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
 |
 |
 |
 |
All commercial dehumidifiers of the TTK-ECO series by direct comparison:
To find the commercial dehumidifier which exactly meets your requirements, please consult the concise overview of commercial dehumidifiers of the TTK-ECO series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID is the perfect solution. Just install it between the device and a fixed socket – done!
Fan assistance
Quicker construction drying by air circulation
The drying time can be reduced by half if construction dryers and fans are combined. In doing this, each dryer is supplemented with a fan, which significantly improves the drying performance and thus also the duration of the drying process.
The increased air circulation results in a quicker evaporation of the humidity, for the higher the flow rate at the material surface, the sooner will the drying process be completed.
The axialfans of the TTV series and TTV-S series are especially suitable to provide assistance with regard to the drying process.
Accessory tip:
External condensate pump for continuous operation
This optionally available condensate pump is compatible with all TTK-ECO models from Trotec and is ideally suited for longer, unattended dry keeping applications. With a pump height of up to 5 metres the condensate can be pumped from the collection container of the construction dryer into a larger container or outside. This makes it possible to let the construction dryer run in continuous operation without a full collection container interrupting the dehumidification process.
standard equipment
optionally available
not available
Shop
/en_GB/1120001115/TTK-165-ECO-Dehumidifier-152504-1662027757.jpg)
TTK 165 ECO Dehumidifier
You save: 50.00 £
549.95 £
499.95 £
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.120.001.115 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 20 | |
| At 30 °C / 80 % RH [l/24h] | 50 | |
| Max. [l/24h] | 52 | |
| Air flow rate | ||
| Level Max. | 350 | |
| Recommended room size dry keeping | ||
| m³ | 230 | |
| m² | 90 | |
| Ambient conditions | ||
| Min. temperature range [°C] | 5 | |
| Max. temperature range [°C] | 32 | |
| Min. humidity range [% RH] | 30 | |
| Max. humidity range [% RH] | 90 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Nominal current consumption [A] | 3.7 | |
| Power input [kW] | 0.82 | |
| Recommended fusing [A] | 10 | |
| Required current starting phase [A] | 25 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Compressor | ||
| Rotary piston compressor | ||
| refrigerant | R-410A | |
| Amount of refrigerant [g] | 230 | |
| Minimum room size [m²] | 11 | |
| GWP factor | 3 | |
| CO2 equivalent | 0.00069 t | |
| Pressure suction side [MPa] | 1 | |
| Pressure outlet side [MPa] | 2.5 | |
| Max. permissible pressure [Mpa] | 2.5 | |
| Water tank | ||
| Contents in [l] | 5 | |
| Sound values | ||
| Level 1 - Distance 1 m [dB(A)] | 56 | |
| Functions and features | ||
| Cable holder | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 495 | |
| Width (packaging excluded) [mm] | 455 | |
| Height (packaging excluded) [mm] | 840 | |
| Weight | ||
| (packaging excluded) [kg] | 31 | |
| Equipment, features and functions | ||
|---|---|---|
| Automatic defrost system | ||
| Air circulation / electronic | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Fan | ||
| axial | ||
| stages | 1 | |
| Condensate tank monitoring | ||
| Container available | ||
| Overflow protection with automatic switch-off | ||
| Filling level warning light to indicate a full water tank | ||
| Room air filter | ||
| Readily accessible | ||
| Cleanable | ||
| Mobility | ||
| Non-marking full-rubber wheels | ||
| Carry/transport handle(s) | ||
| Cable winder | ||
| Carriage design | ||
| Feet | ||
| Condensate drain | ||
| Hose connection possible | ||
| Recommended hose size [mm] | 12 | |
| Condensate pump | ||
| Housing design | ||
| Steel coated | ||
standard equipment
optionally available
not available