Acoustic Tube Probe LD6000PTS
For acoustic leak detection directly in the pressurized water line – also on the house connection side
The remediation of damage after pipe bursts requires a definite clarification of the responsible cost centre.
Has the damage occurred on the terrain of the building's proprietor or on the side of the water supply network?
If to this end one would like to carry out an above-ground acoustic leak detection to locate the damage, the pipeline course must be perfectly clear, which is hardly ever the case. And, so far, pinpoint locating directly in the house connection line has not been possible without further ado.
Finally, using the acoustic tube probe LD6000PTS, pipe bursts can quickly and easily be detected on the side of the house connection, too!
The ingenious combination of compact, bendable pig probe with integrated precision microphone and contactable probe cable enables the acoustic detection of the point of leakage including locating function.
According to regulations, probe and push cable of the LD6000PTS can be disinfected and directly channelled into the pressurized water line on the house connection side.
Flexible application and combination possibilities
Unaffected by ambient sounds, the precision microphone of the LD6000PTS captures even extremely silent noises inside the pipe, which are wirelessly conveyed to the supplied headphones via the Bluetooth transmitter.
Experienced measurement engineers can thus unerringly identify the leaking sound and then determine the position of the leak by use of the metre counter.
Should further a combination detector LD6000 be available, frequencies can additionally be visualized and potential points of leakage can be indicated in form of a bar graph. Moreover, the application of an LD6000 enables the data recording of long-term measurements.
The LD6000PTS provides a variety of mounting options of the push cable pressure lock for flexible insertion via:
Simple pipe and pinpoint location
Furthermore, a frequency generator can be connected to the LD6000PTS to contact the entire push cable or the probe tip.
Then the course of the pipeline or the point of leakage can be detected using a receiver.
A suitable combination of transmitter and receiver is e.g. pipe detector SR-24 with transmitter ST-510.
Alternatively, other commercially available transmitters and receivers operating in the 33-kHz range can be used.
The LD6000PTS impresses with sophisticated features:
Available in four different lengths from 50 to 150 metres
To ensure that you have the optimum tube probe for every requirement, the LD6000PTS is available with a push cable of 80, 100 or 150 metres in addition to the standard 50-metre version.
While the 50 m push cable version of the LD6000PTS has a highly flexible, rubber-coated sensor head with guide ball (A), the 80, 100 and 150 m versions are equipped with a steel-braided sensor head (B).
A matching service case is optionally available for each version – ready for use and equipped with practical accessories and a holder for the Bluetooth headphones included in the standard scope of delivery.
A few practical benefits:
- Pinpoint acoustic leak detection directly in the pressurized water line
- Enables the pinpoint location of the probe tip and route location of the push cable for plastic pipe course detection
- No manipulation by environmental sounds
- Wireless sound transmission via Bluetooth
- Integrated metre counter
Accessories contained in the scope of delivery:
- Bluetooth headphones
Optionally available accessories:
- LD6000PTS Bluetooth receiver
- Service case (example illustration), ready for use and equipped with the following accessories:
- Disinfectant
- Hose adapter
- GEKA couplings 1 inch internal thread and 1 inch external thread
- USB charging cable for headphones
- Car charging adapter
- 1 pair of protective gloves
standard equipment
optionally available
not available
LD6000PTS-50
Technical data | ||
---|---|---|
General information | ||
Article number | 3.110.008.035 | |
Sound | ||
Measuring principle | Piezoceramic | |
Min. measuring range [Hz] | 10 | |
Max. measuring range [Hz] | 16,000 | |
Display | ||
10-stage LED bargraph | ||
Interfaces | ||
Bluetooth | ||
Banana jack | ||
Bluetooth | ||
Type | Bluetooth 2.0 | |
Range [m] | 10 m | |
Device control | ||
Membrane keyboard | ||
Push cable | ||
Durchmesser [mm] | 4.5 | |
Länge [m] | 50 | |
Biegeradius, minimal [mm] | 100 | |
Gewicht [kg] | 10 | |
Bruchkraft [kN] | 40 | |
Mikrofonsonde | ||
Durchmesser [mm] | 10 | |
Länge [mm] | 90 | |
Durchmesser Kugelkopf [mm] | 12 | |
Biegeradius, minimal [mm] | 40 | |
Frequenzbereich [Hz] | 10 - 16.000 | |
Ortungstiefe max. [m] | 3.5 | |
Type of protection | IP68 | |
Kabelschleuse mit Desinfektionsvorrichtung | ||
Druckfestigkeit [bar] | 16 | |
Housing design | ||
Plastic/metal | ||
Type of protection | ||
Schutzart Sensor | IP68 | |
Schutzart BT Transmitter | IP66 | |
Ambient conditions | ||
Operation - min. temperature [°C] | 0 | |
Operation - max. temperature [°C] | 80 | |
Operating time | ||
> 12 h | ||
Power supply | ||
Internal (battery) | ||
Battery type | 1x 9V battery | |
Dimensions | ||
Length (packaging excluded) [mm] | 160 | |
Height (packaging excluded) [mm] | 569 | |
Diameter (packaging excluded) [mm] | 400 | |
Weight | ||
(packaging excluded) [kg] | 17 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Measuring device | ||
Bluetooth headphones | ||
USB cable | ||
Operating manual | ||
Sound-protected headphones | ||
Transport case | ||
Mini earphones | ||
Software LogControl | ||
Software CorControl | ||
Signal pick-up for correlation transmitter | ||
Correlator transmitter 1, yellow | ||
Correlator transmitter 2, red | ||
Notebook for laptop correlator | ||
Charger |
Ascertainable measured values and functions | ||
---|---|---|
Internal sensors | ||
Sound [digits] | ||
Functions and features | ||
Acoustic leak detection in pipelines filled with non-aggressive liquids and under pressure | ||
Waterproof according to protection type IP68 (probe) | ||
10-fold LED display on Bluetooth module | ||
Bluetooth | ||
Robust construction | ||
Cordless battery operation | ||
Battery status indication |
standard equipment
optionally available
not available
LD6000PTS-80
Technical data | ||
---|---|---|
General information | ||
Article number | 3.110.008.037 | |
Sound | ||
Measuring principle | piezokeramisch | |
Min. measuring range [Hz] | 10 | |
Max. measuring range [Hz] | 16,000 | |
Display | ||
10-stage LED bargraph | ||
Interfaces | ||
Bluetooth | ||
Banana jack | ||
Bluetooth | ||
Type | Bluetooth 2.0 | |
Range [m] | 10 m | |
Device control | ||
Membrane keyboard | ||
Push cable | ||
Durchmesser [mm] | 4.5 | |
Länge [m] | 80 | |
Biegeradius, minimal [mm] | 100 | |
Gewicht [kg] | 15 | |
Bruchkraft [kN] | 40 | |
Mikrofonsonde | ||
Durchmesser [mm] | 12 | |
Länge [mm] | 120 | |
Biegeradius, minimal [mm] | 60 | |
Frequenzbereich [Hz] | 10 - 16.000 | |
Ortungstiefe max. [m] | 3.5 | |
Type of protection | IP68 | |
Kabelschleuse mit Desinfektionsvorrichtung | ||
Druckfestigkeit [bar] | 16 | |
Housing design | ||
Plastic/metal | ||
Ambient conditions | ||
Operation - min. temperature [°C] | 0 | |
Operation - max. temperature [°C] | 80 | |
Power supply | ||
Internal (battery) | ||
Battery type | 1x 9V-Blockbatterie | |
Dimensions | ||
Length (packaging excluded) [mm] | 160 | |
Height (packaging excluded) [mm] | 569 | |
Diameter (packaging excluded) [mm] | 400 | |
Weight | ||
(packaging excluded) [kg] | 22 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Measuring device | ||
Bluetooth headphones | ||
USB cable | ||
Operating manual |
Ascertainable measured values and functions | ||
---|---|---|
Functions and features | ||
Acoustic leak detection in pipelines filled with non-aggressive liquids and under pressure | ||
Waterproof according to protection type IP68 (probe) | ||
10-fold LED display on Bluetooth module | ||
Bluetooth | ||
Robust construction | ||
Cordless battery operation | ||
Battery status indication |
standard equipment
optionally available
not available
LD6000PTS-100
Technical data | ||
---|---|---|
General information | ||
Article number | 3.110.008.038 | |
Sound | ||
Measuring principle | piezokeramisch | |
Min. measuring range [Hz] | 10 | |
Max. measuring range [Hz] | 16,000 | |
Display | ||
10-stage LED bargraph | ||
Interfaces | ||
Bluetooth | ||
Banana jack | ||
Bluetooth | ||
Type | Bluetooth 2.0 | |
Range [m] | 10 m | |
Device control | ||
Membrane keyboard | ||
Push cable | ||
Durchmesser [mm] | 9 | |
Länge [m] | 100 | |
Biegeradius, minimal [mm] | 240 | |
Gewicht [kg] | 20 | |
Bruchkraft [kN] | 40 | |
Mikrofonsonde | ||
Durchmesser [mm] | 20 | |
Länge [mm] | 140 | |
Biegeradius, minimal [mm] | 100 | |
Frequenzbereich [Hz] | 10 - 16.000 | |
Ortungstiefe max. [m] | 3.5 | |
Type of protection | IP68 | |
Kabelschleuse mit Desinfektionsvorrichtung | ||
Druckfestigkeit [bar] | 10 | |
Housing design | ||
Plastic/metal | ||
Ambient conditions | ||
Operation - min. temperature [°C] | 0 | |
Operation - max. temperature [°C] | 80 | |
Operating time | ||
> 12 h | ||
Power supply | ||
Internal (battery) | ||
Battery type | 1x 9V-Blockbatterie | |
Dimensions | ||
Length (packaging excluded) [mm] | 380 | |
Height (packaging excluded) [mm] | 830 | |
Diameter (packaging excluded) [mm] | 780 | |
Weight | ||
(packaging excluded) [kg] | 27 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Measuring device | ||
Bluetooth headphones | ||
USB cable | ||
Operating manual |
Ascertainable measured values and functions | ||
---|---|---|
Functions and features | ||
Acoustic leak detection in pipelines filled with non-aggressive liquids and under pressure | ||
Waterproof according to protection type IP68 (probe) | ||
10-fold LED display on Bluetooth module | ||
Bluetooth | ||
Robust construction | ||
Cordless battery operation | ||
Battery status indication |
standard equipment
optionally available
not available
LD6000PTS-150
Technical data | ||
---|---|---|
General information | ||
Article number | 3.110.008.039 | |
Sound | ||
Measuring principle | piezokeramisch | |
Min. measuring range [Hz] | 10 | |
Max. measuring range [Hz] | 16,000 | |
Display | ||
10-stage LED bargraph | ||
Interfaces | ||
Bluetooth | ||
Banana jack | ||
Bluetooth | ||
Type | Bluetooth 2.0 | |
Range [m] | 10 m | |
Device control | ||
Membrane keyboard | ||
Push cable | ||
Durchmesser [mm] | 9 | |
Länge [m] | 150 | |
Biegeradius, minimal [mm] | 240 | |
Gewicht [kg] | 30 | |
Bruchkraft [kN] | 40 | |
Mikrofonsonde | ||
Durchmesser [mm] | 20 | |
Länge [mm] | 140 | |
Biegeradius, minimal [mm] | 100 | |
Frequenzbereich [Hz] | 10 - 16.000 | |
Ortungstiefe max. [m] | 3.5 | |
Type of protection | IP68 | |
Kabelschleuse mit Desinfektionsvorrichtung | ||
Druckfestigkeit [bar] | 10 | |
Housing design | ||
Plastic/metal | ||
Ambient conditions | ||
Operation - min. temperature [°C] | 0 | |
Operation - max. temperature [°C] | 80 | |
Operating time | ||
> 12 h | ||
Power supply | ||
Internal (battery) | ||
Battery type | 1x 9V-Blockbatterie | |
Dimensions | ||
Length (packaging excluded) [mm] | 380 | |
Height (packaging excluded) [mm] | 830 | |
Diameter (packaging excluded) [mm] | 780 | |
Weight | ||
(packaging excluded) [kg] | 37 |
Ascertainable measured values and functions | ||
---|---|---|
Functions and features | ||
Acoustic leak detection in pipelines filled with non-aggressive liquids and under pressure | ||
Waterproof according to protection type IP68 (probe) | ||
10-fold LED display on Bluetooth module | ||
Bluetooth | ||
Robust construction | ||
Cordless battery operation | ||
Battery status indication |
standard equipment
optionally available
not available