Pulse Wave Generator LD-PULS
This pulse generator is ideally suited for the combined application with the LD6000 measuring device.
Locating non-metallic water pipes at a depth of up to two meters
The pulse wave generator creates a periodically recurring pressure wave, expanding with a reach of up to 600 metres given good conditions, which can then be perceived acoustically above the line via LD6000 and a connected ground microphone.
For this purpose the LD6000 is equipped with a special pulse mode, where the volume and frequency of the pulse are optimally represented.
Therefore, non-metallic water pipes can be detected precisely even to a depth of two metres without the need of shutting down.
This way, piping diagrams can quickly and safely be created, complemented and checked.
Standard scope of delivery:
- LD-PULS – pulse wave generator with integrated battery incorporated in robust case unit
- Separate power supply unit for LD-PULS
Optionally available accessories:
- LD-PULS repair set; contains Allen key and four valves
Special equipment features
fast and secure creation, addition or control of pipe layouts
A few practical benefits
- The LD-PULSE is not affected by electric cables and can detect non-metallic water pipes up to a depth of 2 metres without having to close off any part of the network or system.
- under favourable conditions, oscillations can spread out as far as 600 m into the pipe before being detected by a ground microphone.
- fast and secure creation, addition or control of pipe layouts
- Minimum pressure: 2 bar (29 psi) (minimum pressure of the service pipes)
- Operating time: approx. 12 hours
- Pulse sequence: approx. 60 per minute
- Connection: 1-inch GEKA high pressure coupling
- Power supply: Internal battery (rechargeable) or 230V AC
- Weight: 4.2 kg
standard equipment
optionally available
not available
Shop
/en_GB/3110008012/LD-PULSE-Pulse-Wave-Generator-92560-1528730458.jpg)
LD-PULS pulse wave generator
2,649.95 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.110.008.012 | |
| Pipe location | ||
| Minimum pressure | 2 bar (minimum pressure of supply line) | |
| Pulse train | Approx. 60 per minute | |
| Connection 1-inch GEKA high-pressure coupling | ||
| Power supply | ||
| Internal (battery) | ||
| External (power adapter) | ||
| Device control | ||
| Push buttons | ||
| Operating time | ||
| approx. 12 h | ||
| Housing design | ||
| Plastic/metal | ||
| Dimensions | ||
| Length (packaging included) [mm] | 500 | |
| Width (packaging included) [mm] | 270 | |
| Height (packaging included) [mm] | 255 | |
| Weight | ||
| (packaging excluded) [kg] | 4.2 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Transport case | ||
| Battery charger | ||
| Operating manual | ||
standard equipment
optionally available
not available