Infrared radiant heater IRD 1200
Generates cosy warmth, yet emits no visible light portion
Even and targeted heat distribution
Owing to its simultaneously minimalistic and classy design the infrared radiant heater IRD 1200 fits in seamlessly with any environment. At first sight the device impresses with its innovative and aesthetically pleasing design – consequently it is suited both for use in the refined catering trade or in a neat private ambience.
Albeit, the device also leaves a good impression when located outdoors seeing as it comes with IP55 type of protection which makes it dust-, splash- and water-jet-proof.
Where conventional devices are fitted with a visible, brightly illuminated heater tube, this infrared radiant heater can generate the comforting infrared heat by means of a covered stainless steel heating coil enclosed in aluminium – the heat source is shielded from view.
A perfectly elegant solution for outdoor areas, where additional light would be more of a nuisance as it would clash with the present lighting concept. Since the IRD 1200 emits its radiation energy mainly in the medium- and long-wave infrared spectrum, it can distribute heat in an even and targeted manner without heating the ambient air. Hence, the device is ideally suited for use in outdoor areas that are sheltered from the wind such as balconies and terraces. As such, it can be applied in the catering trade.
First-rate design solution with high-class comfort equipment
The "shining armour" of the IRD 1200 not only looks good, the aluminium housing also accommodates convenient equipment features: with its heating capacity of 1,200 W the high-performance radiator braves the cold outdoors, it can be set to 3 heating levels – using an IR remote control if desired – thus covering an extensive heating range.
The effective range is further enhanced by the inclination angle that can be adjusted by 45°. Moreover, the device can score with the clean, condensation-free, odourless and noiseless production of warmth without raising dust – which makes it suitable for allergy sufferers.
A 24-hour timer, the operation indicator light and an LED display complete the equipment of the IRD 1200. The infrared radiant heater require very little maintenance, since there is no need to exchange tubes. An appropriate holder for mounting the device to the wall or ceiling is included in the scope of delivery.
Product video for IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200:
Feel-good warmth for outdoor areas sheltered from the wind – Find out more about the infrared radiant heaters IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200 in our product video.
Watch it now!
The IRD 1200 impresses with practice-oriented details:
All infrared radiant heaters in direct comparison:
To find the radiant heater which exactly meets your requirements, please consult the concise overview of all radiant heaters from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Appealing solution for wind-protected outdoor areas
- IR-B and IR-C provide cosy warmth without light emission
- Even and targeted heat distribution
- Clean, non-condensing, odourless and free from noise
- No dust circulation, thus suitable for allergy sufferers
- Splash- and water-jet-proof, protection class IP55
- 3 heating levels, up to 1,200 watts
- Aluminium design housing
- 24-hour timer
- LED display
- Adjustable inclination angle with a wide effective range
- Suitable for mounting on walls and ceilings
- Infrared remote control
- Operation indicator light
- Wall and ceiling holder included
Overview of the maximum heating range to be covered by a 1,200 watt infrared radiant heater:
| Application area | Recommended heating capacity per m² |
Area that can be covered by an infrared heater with 1,200 W |
|---|---|---|
| outside | Sheltered: approx. 150 W/m² |
approx. 8 m² |
| No shelter: approx. 250 W/m² |
approx. 4 m² |
Heating range of a 1,200 W infrared radiant heater
You can proceed as follows to calculate the heating capacity (in watts) required for your room size:
Formula: m² x W/m² = W
room size (m²) x recommended heating capacity per square metre (W/m²) = required heating capacity of the infrared radiator (W)
Sample calculation: For a well insulated room sized 12 m² we recommend the following heating capacity: 12 m² x 100 W/m² = 1,200 W
Protection type IP55: provides protection against water, humidity and dust
Infrared radiant heaters are available in many different versions for indoor and outdoor use. An important criterion for device selection is whether or not your radiant heater may be exposed to water or plenty of dust at its site of assembly or installation. If an infrared radiant heater is mounted in the bathroom, for instance, it operates at high humidity levels. Moreover, depending on the site of installation, water jets may reach the housing in some way or other. An infrared radiant heater installed on your terrace should be able to withstand occasional downpours. Heaters used in the workshop, however, should be protected against dust to a certain extent.
The IP55 type of protection promises that dust cannot settle within the housing and that the radiant heater can withstand water jets from all sides. The robust design permits both the installation on balconies or terraces and the use at winter sports events. Owing to their dust protection these radiant heaters can also be used in industrial buildings.
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
standard equipment
optionally available
not available
Buy
/en_GB/1410003310/Tinted-infrared-heater-IRD-1200-136194-1637309877.jpg)
IRD 1200 Tinted Infrared Heater
You save: 150.00 £
269.95 £
119.95 £
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.410.003.310 | |
| Heating capacity | ||
| in [W] | 1,200 | |
| Level 1 [kW] | 0.4 | |
| Level 2 [kW] | 0.8 | |
| Level 3 [kW] | 1.2 | |
| Level Max. [kW] | 1.2 | |
| Effective range | ||
| in [m²] | 8 | |
| Electrical values | ||
| Mains connection | 220 - 240 V, 50/60 Hz | |
| Nominal current consumption [A] | 5.2 | |
| Power input [kW] | 1.2 | |
| Electric connection | ||
| Connection plug | CEE 7/4 (Schuko plug type F) | |
| Cable length [m] | 1.8 | |
| Housing design | ||
| Aluminium | ||
| Safety feature | ||
| IP type of protection | IP55 | |
| Control panel | ||
| LED display | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 55 | |
| Width (packaging excluded) [mm] | 930 | |
| Height (packaging excluded) [mm] | 200 | |
| Weight | ||
| (packaging excluded) [kg] | 8 | |
| Equipment, features and functions | ||
|---|---|---|
| Functions and features | ||
| Infrared remote control | ||
| ON/OFF switch | ||
| Inclination [°] | 45 | |
| Operating control lamp | ||
| Number of heating levels | 3 | |
| Timer function | ||
| Immediate heating due to direct infrared heat | ||
| No dust circulation (suitable for allergy sufferers) | ||
| Odourless and silent operation | ||
| Wall mounting | ||
| Ceiling mounting | ||
| Tripod | ||
standard equipment
optionally available
not available