Floor fan TVM 11 / TVM 12
A fresh breeze with a classic retro look
Fast cooling comes first
As of now, this elegant eyecatcher with its classic retro design chases away the stuffy warm air and provides a steadily cooling air flow.
From its chrome/copper-look fan blades to the likewise copper-/chromium-plated stand bar, the floor fan TVM 11 / TVM 12 is entirely made of metal – even the motor is equipped with a copper coil. This does not only give the device a noble look but also increases its lifetime.
With its cool chromium/copper design, the TVM 11 / TVM 12 is an ideal piece of equipment for your living room and also leaves an excellent impression in the office thanks to its smooth running characteristics. The elegant wind machine provides the right breeze for photo and film shootings. By the way, thanks to the optionally available wall and ceiling holder, it may also be used in a restaurant. Above that, the retro device with its 37 watts of power and a fan blade diameter of 12 inches generates a fair amount of coolness at every workplace – ranging from a soft breeze to a strong wind. Whether for ventilation, wind generation, wind cooling or drying – the TVM 11 / TVM 12 is varied in use.
Cooling down even at escalating temperatures
Via the operating elements fitted at the rear of the copper-/chromium-plated metal grid, the fan's power level can be selected as desired. With its three available speed levels, the TVM 11 / TVM 12 is easily able to cope with both moderate temperatures and hot temperature peaks. Since the metal grid can be steplessly tilted around its horizontal axis by up to 100°, it makes no difference whether the cooling air flow is required at the floor level or above – it will reach its destination in any case!
Secure footing – convenient change of location
Three slip-resistant rubber feet attached to the bottom side of the likewise copper-/chromium-plated stand bar provide a stable positioning of the floor fan – so that it can easily cope with slight jostles.
The compact TVM 11 / TVM 12 is also perfectly prepared for a change of location – a carrying handle attached at the rear as well as the cable winder make a relocation of this flagship fan a simple exercise.
The details of the TVM 11 / TVM 12
Style and functionality perfectly combined
All Fans of the TVM series in direct comparison:
To find the Fan of the TVM series which exactly meets your requirements, please consult the concise overview of all Fans of the TVM series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Power of 37 watts
- 3 speed levels
- Inclination angle of the fan head adjustable by up to 100°
- Metal grid with modern chrome/copper look for protection at the front and rear
- Fan blade diameter 30 cm
- Stable and non-slip base for secure footing to prevent tipping over
- Long lifetime thanks to motor with copper coil
- Smooth and silent operation
- Integrated cable winder
- Convenient carrying handle
- Unique value-for-money ratio
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
standard equipment
optionally available
not available
Shop
Floor Fan TVM 12
You save: 14 %
54.95 £
46.95 £
incl. VAT
Show net price (VAT not included)
Floor fan TVM 11
You save: 14 %
54.95 £
46.95 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.510.006.011 | |
Air flow rate | ||
Level Max. | 3,019 | |
Fan | ||
stages | 3 | |
blade diameter ["] | 12 | |
blade diameter [cm] | 30 | |
Number of fan blades | 3 | |
Level high [rpm] | 1,250 | |
Level medium [rpm] | 1,100 | |
Level low [rpm] | 950 | |
Foot diameter [mm] | 16 | |
cowl diameter [mm] | 350 | |
Motor | 78x16 mm | |
Electrical values | ||
Mains connection | 220 - 240 V, 50 Hz | |
Power input [W] | 37 | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.5 | |
Protection class | IP 20 | |
IP20 | ||
Sound values | ||
Level Max. - Distance 1 m [dB(A)] | 58 | |
Functions and features | ||
Auto restart function | ||
Adjustable inclination angle [°] | 100 | |
Mobility | ||
Foot | ||
Cable winder | ||
Carry/transport handle(s) | ||
Housing design | ||
Metal | ||
Dimensions | ||
Length (packaging excluded) [mm] | 185 | |
Width (packaging excluded) [mm] | 395 | |
Height (packaging excluded) [mm] | 375 | |
Weight | ||
(packaging excluded) [kg] | 2.8 |
standard equipment
optionally available
not available