Designer convector TCH 25 E / TCH 26 E
Compact rapid heater with turbo blower for temporary or additional heating providing cosy warmth
Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
Looking for faster heat generation? Crank up the turbo: The TCH 25 E / TCH 26 E is equipped with an on-demand blower for faster air circulation allowing you to reach the desired temperature in your rooms in next to no time.
Prompt heat to the minute? Not a problem for the TCH 25 E / TCH 26 E either: Using the integrated timer, you can programme your individual daily heating periods – between 15 minutes and 24 hours in advance.
Immediately after switch-on, the powerful, 3-stage heating capacity of the convector provides cosy and clean, odourless and noiseless warmth. In combination with the thermostat-controlled automatic operation, the power consumption, too, remains agreeably low: The thermostat adopts your target value and controls the heating capacity in an independent and energy-efficient way until automatic switch-on or switch-off.
The TCH 25 E / TCH 26 E is suited for almost every kind of private application – particularly with regard to its appealing embossing design: in cold bathrooms as well as during the transition periods between seasons, or as an additional heater for cold days. The fan heater even leaves a good impression when used as a frost monitor in unheated basements and garages!
You can use the convector everywhere immediately, provided that there is a wall socket nearby. An integrated overheating protection guarantees safety.
The TCH 25 E / TCH 26 E impresses with many practice-oriented details:
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Heating capacity of up to 2,000 W for clean, non-condensing and odourless heat
- Turbo blower for quicker air circulation
- Infinitely variable thermal control
- Three heating levels
- Thermostat-controlled automatic operation
- Frost monitor function
- Energy-efficient operation thanks to automatic switch-off upon reaching the set value
- Overheating protection
- Noiseless heating
- 24-hour timer
- Secure footing due to large feet
Frost monitor function
Ideal for short-term property vacancies or temporarily used rooms
Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
standard equipment
optionally available
not available
Buy
Designer Convector TCH 25 E
You save: 51 %
69.95 £
33.95 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.410.000.521 | |
Heating capacity | ||
Level 1 [kW] | 0.75 | |
Level 2 [kW] | 1.25 | |
Level 3 [kW] | 2 | |
Level Max. [kW] | 2 | |
Electrical values | ||
Mains connection | 220 - 240 V, 50/60 Hz | |
Max. power input [W] | 2,000 | |
Nominal current consumption [A] | 8.7 | |
Safety feature | ||
Protection class | I | |
Overheating protection | Available | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.5 | |
Mobility | ||
Feet | ||
Recessed handles | ||
Dimensions | ||
Length (feet included) [mm] | 220 | |
Width (feet included) [mm] | 600 | |
Height (feet included) [mm] | 380 | |
Weight | ||
(packaging excluded) [kg] | 3.5 |
Equipment, features and functions | ||
---|---|---|
Functions and features | ||
Frost monitor function | ||
Operating control lamp | ||
Thermostat-controlled automatic operation | ||
Automatic switch-off upon reaching the set value | ||
Turbo blower | ||
24 h timer | ||
Operation | ||
Steplessly adjustable thermostat | ||
Housing design | ||
Sheet steel – coated |
standard equipment
optionally available
not available