Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Work tent with pitched roof 250 TE
  1. Products & Services
  2. Assembly work tents and screen fences
  3. Assembly work tents
  4. 250 TE

Pitched roof tent 250 TE

5.00 m² of wind and weather protection for all outdoor construction work. Can also be used as a medical supply tent.

Used in practice
Pitched roof tent
250 TE – dimensions

Compact lightweight with outstanding floor space

The 5.00 m² work tent 250 KE is optimally designed for large-scale outdoor work. Equipped with all the advantages of the smaller version, the pitched roof tent also scores with a spacious working surface and a simultaneously comfortable height of 1.9 m. With this tent, no one is left out in the rain on the construction site! Just as quickly as the tent is unpacked and pitched, it can also be taken down again after work and stowed in the practical carry bag.

These are features of all tents of the TE series:

Designed for protection against wind and weather and to withstand the rough operating conditions on construction sites, all tents of the TE series are made of tear- and abrasion-resistant PVC fabric. The waterproof material is lightfast despite its robustness, which makes the TE tents also suited for installation work with multi-coloured wiring looms. The sophisticated clamping system with a solid fibreglass frame enables the tent to be pitched in a matter of seconds and also ensures optimum stability combined with a low weight. To remove the inevitable dirt and dust of the construction site from the tent fabric, it can be wiped or cleaned with a high-pressure cleaner. If required, Trotec includes special electric heaters in your order, such as the TEH 70, the TEH 100, the TDE 95 for heating interior spaces. This also applies to special dehumidifiers such as the TTR 400 D or the TTR 500 D for drying indoor air by means of circulation.

Robust protection against wind, weather and cold for outdoor work

Due to their resistance, the quick-to-pitch tents of the TE series are ideally suited for earthworks and pipeline work, for sewer and road construction work, but also for work on switchgear and control boxes and comparable applications. The tents convince all year round in the protection against rain and cold on construction sites as well as in rescue service operations and civil protection.

Equipped with all the necessary technology, available in all kinds of special versions

Even the standard versions of all tents of the TE series in white, yellow, blue and red offer more comfort and equipment than comparable solutions of other manufacturers.

  • Two rain-protected zip fasteners enable access via the front and rear side of the tent.
  • The rear supply opening with zip fastener serves for an on-demand aeration and deaeration, heating, dehumidification or air purification of the interior of the tent.
  • The integrated extension option on one side of the tent makes it easy to connect two TE tents with one another.

Available sizes

Type Length Width Height
180 TE 180 cm 180 cm 170 cm
250 TE 250 cm 200 cm 190 cm
Product brochure Tents – working sheltered (DE)


Whether on the construction site or for emergency services - you can also find all the relevant information about our work tents and privacy screens in the product brochure. Download the PDF directly here.

To the PDF document

"Regardless of the weather: Owing to the excellent assembly work tents from Trotec we can work on site 24/7."

Ulrich Thurmann,
Röhn-Montage Fernmeldebau GmbH

Customer's opinion

Tents of the TE series protect reliably against wind, weather and cold

During construction and installation work outdoors, the tents of the TE series will provide shelter from rain and weather for a variety of sectors and applications, all year long and with additional heating solutions, if required.

Work tent for earthworks and installation activities

When used on construction sites, a tent of the TE series convinces with its extreme robustness protecting from wind, weather and cold – all year long! Bursting water pipes concerning the jurisdiction of the municipal utilities, damaged underground cables of the local energy supplier but also distribution networks of the telephone provider require rapid action in the event of a failure at any time of the year in order to restore the availability of water, electricity or the internet and to minimize consequential damage.

Protection against weather

While carrying out such work, the tent ensures to protect the working area from weather. This is indispensable, especially during electrical work performed at the cable distribution cabinets of municipal utilities. Moreover, the tent serves as a shelter for all necessary technology, working material and technicians and protects from rain, wind and weather. Independent from the current weather situation, diverse working activities can be performed with a tent of the TE series and an additional heating device, if required.

Protection tent for working at high temperatures

Carrying out welding work in bad weather conditions is a real challenge – though not for a tent of the TE series as it will imposingly demonstrate its abilities, like it will for many other application options. The tent fabric is flame-retardant to temperatures up to 500 °C. That's why it withstands even the highest temperatures that prevail during welding work.

To ensure a secure fixation on nearly all grounds and to guarantee an uninterrupted workflow and working progress even under the most severe wind conditions, Trotec offers professional fastening accessories for all tents. Custom-made models such as rail fixations in order to attach magnets safely on rails are just as available as individually manufactured solutions.

Versatile application options:

  • Work tent for road construction and electrical works and for works on waste water and pipes
  • Assembly work tent for maintenance and inspection works
  • Shelter from wind and weather for the building industry
  • Quick set-up tent for welding works
  • Storage tent for materials and equipment
Shelter from weather during construction work
Robust quality
Used on a construction site
Also ideal for events, rescue services, sports competitions

Always ready for use: Suitable for operations and providing weather protection

Large groups of people as at Fridays for Future demonstrations, the G20 Summit, at concerts and large-scale sports events always require an appropriately sized weather protection in addition to the numerous emergency personnel on site. This ensures to protect material and equipment, but also serves as a weatherproof shelter for the operations manager, the staff or the press spokesperson. 

The next operation will come for sure, whereas it can never be sure that the local circumstances provide sufficient protection from weather for the expensive and delicate equipment. Rain and snow are as harmful to the equipment as dust inclusions, dirt or high solar radiation which results in the technology heating up. Moreover, the emergency personnel must have the option to be provisioned with food during long operations at a central point. These are numerous good reasons for the universal application of our TE tents.

If every second counts... Pitched in a matter of seconds

Thanks to the innovative fibreglass clamping system, the quick-to-pitch tents of the TE series are ready to be used in a matter of seconds. This makes them ideal for any kind of big event or emergency situation. The intuitive handling of the folding tents makes introductions or training courses superfluous. In no time, the tent can be pitched by only one person at the site of operation, and dismounted and compactly stowed away in the emergency vehicle just as quickly. 

Needless to say, special designs in signal colours can be accomplished just as well as an individual print on the tent cloth can be.

Events running smoothly with the tents of the TE series

Whether you use it as supply station next to the running track, as medical tent at the finish line or as wind, weather and sun protection in the transition zone of a triathlon course: at sports events, the Trotec tents of the TE series will always provide a smooth running! Event organisers appreciate the uncomplicated handling on the one hand and the compact dimensions of the folded TE tents on the other. In the off-season, the conveniently packed tents can be stored without any problems. During the season, you can simply keep them inside the material vehicle in order to accomplish spontaneous operations without any difficulty.

From start to finish line – optimally equipped for maximum athletic performances! 

Versatile application options:

  • Work tents for police, fire brigade, agencies for technical relief and aid organisations
  • Weather and sun protection for material and equipment on site
  • Supply station during sports events
  • Wind, weather and sun protection in the transition zone of triathlon events

Special designs for individualists

Whether a flat-roofed tent or pitched roof tent – when it comes to special designs, we can always give a clear response: "Everything is possible!". This answer is not an empty phrase – see our large number of special designs for globally renowned companies. Whether you would like to have "your tent" in a special colour matching your corporate design or equipped with additional hatch windows and supply openings: We'll deliver your customised tent in almost any version or size!

Exemplary individualised versions:

Matching your corporate design: This comprises the logo imprint as well as the corporate colours – everything is possible!

Additional visual hatch windows: Need maximum daylight for your application purpose? No problem! Additional window modules can be integrated anywhere on the tent wall!

Variable tent entrances and exits: A walking-through passage tent version (with entrance and additional exit) is just as possible as triangular shaped doors and other models.

Supply openings: At request, we are happy to integrate one or more ventilation openings anywhere you like.

The right tent for each sector and application : Here you will find application examples of our tent solutions from real life.

350 KE – special model fully transparent
350 KE – special model corporate logo
350 KE – special model triangular window
Pitched roof tent from Trotec

Convincing in the field:

  • 5.00 m² working surface protected from wind and weather
  • Stably set up by only one person in only a few seconds
  • Quickly ready for use with suitable accessories in every place and in every weather
  • Space-saving and easily stowed away in a compact carry bag
  • Can be brought along in any emergency vehicle
  • Easiest handling, no training required
  • Supply opening for heaters, dehumidifiers and air cleaners
  • Easy to clean and to disinfect (suitable for high-pressure cleaning)
  • Wide range of available models, a variety of colours, individually configurable

Pitched in a matter of seconds

Unpack, set up – and you're done!

Setting up the tent only requires one person. The tent can be erected in just a few simple steps in less than one minute. The set-up process is designed so easily and intuitively that you can completely do it without any time-consuming and complicated introduction.

The tent will stand on its own immediately.

The practical fibreglass rod system directly supply internal stability to the tent by the flexible quick-action aluminium ball joint discs and therefore provide for self-sufficient and secure footing. Depending on the wind force and ambient situation, the screen can additionally be fixed by means of optimally suited accessories.

Quickly wrapped up again.

Once the operation has been completed successfully, the tent can be wrapped up into the transport bag as uncomplicatedly and quickly as it has been set up before – well protected and conveniently stowed until its next use!

If you need any further information regarding our work and assembly tents, we'll be glad to assist and advise you. Benefit from our longstanding experience, we offer comprehensive, individual and tailor-made consultation to meet your special application.

Quick and simple to pitch
Quick and simple to pitch
Quick and simple to pitch
Quick and simple to pitch
Quick and simple to pitch

Well thought-out and perfected: The pitched roof tent 250 TE in detail

Entrance on both sides

Tent entrance on both sides

Flexible access: The front and rear zips allow individual access to the tent. In addition, these openings can be used to guide supply pipes, air hoses or lines into the tent interior. Depending on whether the tent is open or closed, you can cover building pits, trenches or manholes with a width of up to 4 m over a length of 2.5 m. It is also possible to connect several tents by using an additional adapter.

350 KE – best workmanship

Highest manufacturing quality

Field-tested: The material connection areas and fabric transitions of the entire tent are tightly sewn or solidly welded. Both the opaque white PVC fabric and the coloured PVC tarpaulin convince with their high wear resistance and strength. The particularly light fibreglass frame provides for stability, optimal handling and a quick set-up. Thanks to the robust metal feet the tents are positioned on firm ground in every situation. Thanks to a Velcro cover, water cannot enter and the high-quality zip fasteners are protected from rain.

Lightfast fabric

Lightfast and flame-retardant sheet

Colours can be distinguished in the inside of the tent: The tarp is made of high-quality, coated PVC fabric. This ensures the lightfastness for safe working inside the tent without tiring and is important for the quick colour recognition of multi-coloured wiring looms. Moreover, the flame-retardant sheet meets the fire prevention requirements.

350 KE – reflective strips

Reflective strips

Safety first! To ensure that the site of operation is not only shielded but also well visible in the dark, a silver-grey reflective strip is provided on the outer wall. This makes it possible, for example for vehicle drivers, to see with their vehicle's headlights from a far distance that a work tent has been pitched. The glistering reflective strap is tightly sewn to the sheet.

350 KE – foot strip

Practical foot strip

Minor detail with major effect: The foot strip which is tightly sewn to the bottom edge allows for easy and quick set-up of the tent. The flysheet can be securely fixed to the ground with the foot and by pressing in the flexible aluminium ball joint disc, the crossed fibreglass rods open up easily and quickly on their own. This way, the tent can be erected by only one person in no time.

Compact carry bag

Stored away with minimum space requirements

Things must be kept in order! The tent is stowed away compactly folded in the carry bag included in the scope of delivery. The durable PVC bag can be stowed away quickly and easily in any kind of transporter or emergency vehicle. Owing to its large carrying straps, the bag can be carried by one person in full work gear, for example also over the shoulder.

Optionally available fastening accessories for Trotec work tents

Whether you like to attach accessories on crash barriers, equipment parts, on smooth surfaces or in between cobblestones – the original Trotec accessories reliably serve for optimum stability in wind and weather conditions. You are even ideally prepared for various terrain and ground conditions. Tip: Just combine the various fastening solutions which will enable you to react appropriately to all kinds of situations.

Screen fence VarioScreen – magnet

Magnetic attachment, e.g. for crash barriers
Just attach it and you're done! In emergency situations, a variety of metallic surfaces can be perfectly utilized as a means of attachment. Simply fix the magnet attachment with its integrated tensioning strap eyelet to crash barriers, vehicles, machines, generators or to steel doors, pillars, bridge railings. The strong magnetic force provides for secure support. The size of the magnet attachment also perfectly matches the Trotec plate peg.

Screen fence VarioScreen – plate peg

Plate pegs for spaces between cobblestones or soil
The plate pegs of robust metal are available in lengths of 20 cm and 40 cm. Just drive the solid pegs into the soil, into grassland, grass verges or into the joints of laid cobblestones. The angled shape of the peg tip exactly matches the crossed spaces of cobbles. Whether they are used alone or together with the magnet attachment that accurately matches the plate head – the plate pegs are a perfect attachment point for tensioning straps. 

350 KE – water bag

Water bags for reliable weighting
With the 2-metre water bag of heavy-duty PVC, the dirt-collecting edges or the T-feet of the telescopic rods can be weighted. This almost prevents toppling and blowing away to almost 100 %. The water bag is filled quickly and then has a weight of up to 20 kg. After using, just drain the water from the bag again and fold the empty bag in a compact and space-saving fashion. The water bag also supports the tensioning straps securely and without any complication.

Connection piece

Connection piece for 2 tents
With the optionally available connection piece, you can quickly and easily connect 2 TE pitched roof tents with each other. This way you can double the size of the covered area. The connecting piece is attached to the seam protruding on one side of the tent using a zip.

Tensioning strap

Tensioning straps for secure strapping
The 2.5 metre tensioning straps from Trotec are made of an extremely robust nylon-fabric. Whether they are fastened on tent pegs, crash barriers, canisters, vehicle eyelets, trees or fences – with the steplessly adjustable tensioning straps, your tent can be fixed quickly and easily in every situation.

Screen fence VarioScreen – suction cup

Suction cup holder for smooth surfaces
For smooth glass, plastics or metal surfaces, for example on vehicles, the suction cup holder provides a reliable and comfortable mounting option. The large lever can also be handled well by a person wearing work gloves. One downward movement of the lever suffices to fix the suction cup by means of vacuum. Now a tensioning strap can be hooked into the stable metal eyelet. The suction cup holder can also be removed again quickly, easily and cleanly. 

Technical data

Pitched roof tent 250 TE

Assembled tent: Length: 2.5 m x width: 2.0 m x height: 1.9 m
Surface: 5.00 m² of floor space
Roof: Pitched roof

The robust PVC fabric is lightfast, water-repellent and easy to clean and to disinfect. Grey reflective strips are provided all around the tent. Moreover, all zip fasteners are protected with rain protection strips. The feet are made of plastic.

Transport bag
Delivered with carrying bag
Weight: 14 kg (incl. tent)
Features: robust, compact, space-saving, easy-to-transport

Possible colour combinations

Individual sizes, corporate design models and further accessories are available on request.

250 TE – colour variants and dimensions
Trotec – your specialist for tents

Any questions or looking for personal consultation?

If you need any further information regarding our work and assembly tents, we'll be glad to assist and advise you. Benefit from our longstanding experience, we offer comprehensive, individual and tailor-made consultation to meet your special application.

Marc Pluijmaekers – your specialist for screen fences & tents

Telephone +49 2452 962-481

Pitched roof tent 250 TE – practical benefits:

  • Versatile tent
  • Set up by only one person in less than 1 minute
  • 2.5 m length, 2.0 m width, 1.9 m height
  • High stability, with accessories to be used even at high wind forces
  • Durable and opaque PVC fabric
  • Flame-retarding in compliance with DIN 4102 B1
  • Including a space-saving transport bag
  • Easy to clean and to disinfect
  • Individually customizable in colour and shape
  • Practical zip fasteners at the front and back
  • Extension possibility on one side already integrated as standard
  • Two lifting lugs in the upper inner corners
  • Sophisticated, self-supporting construction – no loose rods
  • Grey reflective strips all around
  • 5.00 m² of floor space
  • Weight: approx. 19 kg
Technical data by comparison

All assembly tents in direct comparison:

To find the assembly tent which exactly meets your requirements, please consult the concise overview of all tents from Trotec which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


250 TE Work Tent, 250*200*190, pitched roof show in Trotec online shop

Technical data

Technical data
General information
  Article number
  flat roof
  Pointed roof
  Length (packaging excluded) [mm] 2,500
  Width (packaging excluded) [mm] 2,000
  Height (packaging excluded) [mm] 1,900
  (packaging excluded) [kg] 18.2

 standard equipment

 optionally available

 not available



Alternative products