Belt sander PBSS 10-800
The perfect finish for smooth surfaces – 800-watt belt sander with fixture, dust collection bag and abrasive belt for wood for mobile and stationary use
Mobile and stationary sanding with extensive material removal
Our easy-to-handle 800 watt belt sander PBSS 10‑800 is the must-have partner for woodworking professionals and DIY enthusiasts to obtain quick work results in the house, garden, or on the construction site. A comparatively extensive sanding surface of 76 x 120 mm and a sanding speed of 120 (level 1) – 380 (level 6) m/min always guarantee you a high rate of material removal when sanding, sharpening, smoothing, cleaning and deburring wood, plastic, metal or steel. In this way, you can remove paint layers as well as paint residues from a range of widely differing materials easily and quickly, grind down wooden floorboards, or hone coarse wood and wooden surfaces. The all-rounder is equally suitable for the easy processing of metal, for instance to remove surface rust, rust blisters or illuminate metal surfaces.
Good to know: An overview of the different belt speeds and sandpaper grain sizes suitable for the different tasks and materials can be found here.
Optimum work-price balance: Professional complete equipment at a DIY product price
Whether you wish to carry out rough grinding tasks with maximum material removal or finishing tasks for especially smooth surfaces – with the belt sander PBSS 10‑800 and the matching abrasive belts, you are perfectly equipped to meet all challenges of wood, plastic or metal surface treatment.
To ensure that you can directly start with your work after unpacking the device, an abrasive belt of grain size 80 for wood machining is already included in the scope of delivery. To make sure that you’re always ideally equipped for all work that needs to be performed, we recommend using our special price 10-piece set of belt sanding paper.
Brand quality with a professional full equipment at an attractive DIY product price – this is an offer exclusively made by Trotec power tools.
Continuous perfect sanding results
Conventional belt sanders are available as a stationary and mobile tools for ordinary use. The universally usable PBSS 10‑800 convinces by its equipment and versatility in both disciplines while being pleasantly easy to handle. The slim reel for sanding close to the edge is equipped with an automatic centring function to automatically centre the abrasive belt. If necessary, manual fine adjustment of the belt run can be carried out via an easily accessible adjusting screw. Changing the abrasive belt is carried out equally easy thanks to the innovative clamping lever system – without the use of any tools and in only a few seconds.
Controlled guiding: manual operation with maximum power transmission
A perfectly balanced power transmission system that transfers the power of the durable 800 watt motor with maximum efficiency and minimum vibration to the belt shaft, always guarantees perfect sanding results. The ergonomic design of the PBSS 10‑800 ensures fatigue-free working and precise guiding even after a long period of use. The belt sander has a perfectly positioned centre of gravity and, in addition to a handle fitted with a soft grip rubber inlay, is equipped with a guide handle enabling controlled two-hand operation.
Non-stop sanding: stationary operation with retaining brackets
In stationary operation, the PBSS 10‑800 can be fastened on the work table or workbench without any difficulty using easy-to-use retaining brackets and can be set to continuous operation by means of the locking switch. The device is provided with an integrated fixture to securely fit the table clamps supplied.
PBSS 10‑800 – high sanding performance without raising dust
Dust-free working with a clear view – a snap for the PBSS 10‑800. To prevent the large amount of material abrasion from hovering around in the air as particulate matter and from being inhaled, from covering the workplace in dust or making the workshop dirty, the PBSS 10‑800 features an integrated dust extraction system. A textile dust collection bag with quick release fastener is already included in the scope of delivery. The bag is emptied quickly and easily via a zipper system. This also makes the PBSS 10‑800 suitable for indoor applications in the environment of dust-sensitive furniture or electronic devices, for example for renovation work. If required, an external dust extraction system (e.g. a conventional vacuum cleaners) can be connected via an adapter that is also supplied. Therefore the regular depletion of the dust bag is dispensed with.
The key equipment features of the PBSS 10‑800 at a glance
With the versatile belt sander PBSS 10‑800 everything runs smoothly
All Grinding machines in direct comparison:
To find the grinding machines which exactly meets your requirements, please consult the concise overview of all grinding machines from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Powerful 800 W belt sander allowing a high removal rate on large surfaces
- Slim reel ensures sanding operation close to the edge
- Switch lock for continuous operation including retaining brackets for stationary use
- Tool-free clamping system allowing for easy replacement of the abrasive belt
- Steplessly adjustable belt speed (between 1 to 6 levels) ensures material-compliant working
- Automatic belt run centring with a fine adjustment option for working close to the edge
- Attachable textile dust collection bag with zipper emptying for clean working
- Connection for an external dust extraction system
- Suitable for commercially available abrasive belts (76 x 457 mm)
- Main handle with rubberised soft grip insert plus guide handle to provide for extra firm support and precise working
All important features at a glance
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority Intertek certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Brand quality plus cost-efficiency
So far, you basically only had two options when choosing a belt sander: either good but expensive, or mainly cheap.
Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for brand quality where measuring devices and air conditioners are concerned, but also when it comes to power toolsof brand quality: professional Trotec solutions with an excellent value-for-money ratio!
10-piece set of abrasive belts
Which grit is to be used for which type of application?
The set of abrasive belts from Trotec contains sandpapers with 6 different grain sizes. Which grit best suits which application depends on the condition of the initial surface and on the desired result or the intended surface appearance. Coarse, medium or fine grit – for ideal results we recommend using the following abrasive belts from our set:
Coarse grit (1 x 40 and 2 x 60)
With the coarse grain sizes 40 and 60 you can start processing rough surfaces on boards, planks or old furniture. Coarse-grained sandpaper removes a lot of material in a short period of time – this ensure a fast work progress which is especially suited for removing scratches, discontinuities and surface irregularities. But the sanded surface is still relatively rough.
Medium grit (1 x 80 and 2 x 100)
Following the rough grinding you can use the abrasive belts of grain size 80 and 100 to refine your result. The medium-grained belts are also excellently suited for removing any paint or adhesive residues. An already very smooth wooden surface on the other hand can be roughened up a little for subsequent painting.
Fine grit (2 x 120 and 2 x 150)
For the perfect finishing touches we recommend using the two sandpapers with the finest grit (120 and 150). Afterwards you can run your fingers along a silk-smooth wooden surface. Fine sanding is also the best preparation for a later treatment of the wood with oil or wax.
Using the 10-piece set of efficient abrasive belts from Trotec you are optimally prepared to achieve ideal results with all customary belt sanders with the corresponding holding fixture.
VC 15‑20V – perfect working without raising any dust
With the cordless vacuum cleaner VC 15‑20V you spare yourself the trouble of emptying the dust bag. As an extraction system for electric tools, the VC 15‑20V keeps the air and working environment clean – making you independent of free sockets and annoying extension cables. Just as many Trotec power tools, the vacuum cleaner draws its power from a lithium-ion battery (20V/2Ah) from the Flexpower multi-device battery series.
Fine dust particles that are ejected in the sanding or sawing process are sucked into the 10-litre dust collection container without any effort by the extremely manoeuvrable cordless vacuum cleaner with its practical castors. Furthermore, an integrated HEPA filter (> 89 % filter efficiency) prevents dust particles that have been sucked in from getting back into the room air and being inhaled.
|Power input [W]||800|
|Speed selection [min‑1]||1.030 - 3.280 min-1|
|Belt speed [m/min.]||120 - 380 m/min.|
|Belt dimensions (W x L)||76 x 457 mm|
|Grinding surface||76 x 120 mm|
|Mains connection||230 V, 50 Hz|
|Connection plug||CEE 7/17|
|Cable length [m]||2|
|Sound values according to EN 62841-2-4|
|Sound pressure level [dB(A)]||90.2|
|Sound power level [dB]||101.2|
|Uncertainty (K) [(K)]||3|
|Vibration information according to EN 62841-2-4|
|Vibration emission value (ah) Front handle [m/s²]||5.5|
|Uncertainty (K) Front handle [m/s²]||1.5|
|Vibration emission value (ah) Main handle [m/s²]||5.5|
|Uncertainty (K) Main handle [m/s²]||1.5|
|Length (packaging excluded) [mm]||150|
|Width (packaging excluded) [mm]||350|
|Height (packaging excluded) [mm]||155|
|(packaging excluded) [kg]||3.75|
|Equipment, features and functions|
|Functions and features|
|Infinitely variable speed control|
|Infinitely variable belt speed|
|Tool-free clamping system|
|Suited for mobile and stationary operation|
|Mountable dust collector|
|Standard scope of delivery|
|Accessories scope of delivery|
|Adapter for external dust extraction|
|Abrasive belt for wood||Grain size 80, 76 x 457 mm|