TAC XT – application area HEPA air purification
The TAC XT as a 100 % mobile solution for air pollution control and virus filtration
High-performance air purifier TAC V+ – TAC XT's prominent little brother
If you need a high-performance air cleaner for all the application areas mentioned above, but you do not require any heating function for heating spaces, the high-performance air purifier TAC V+ is the best recommendation!
The TAC V+ is based on the same assembly as the TAC XT and has an identical fan performance and HEPA air purification function. The TAC V+ is not equipped with a heating unit for heating rooms, however, the device comes with an additional heating for automatic filter regeneration and thermal virus decontamination. Detailed information about the TAC V+ is provided on the product page of this "made in Germany" room air cleaner ...
High-performance air purification in combination with decontamination or air heating
If the TAC XT is equipped with the DualDecon blowing-out tower or the attachment hood for hose connection, the high-efficiency particulate air filter of class H14 can additionally be installed in the TAC XT.
This fully encapsulated H14 metal lamella high-temperature filter "made in Germany" with flow-optimised high-tech filter material is specially developed for Trotec and is characterised by a high separation efficiency of 99.995 % for particle sizes of 0.1 to 0.2 µm. This allows the device to effectively filter bacteria and viruses from the room air.
In combination with the H14 HEPA filter, the TAC XT can also be used as a powerful air cleaner. Two fields of application are particularly well suited for an additional HEPA air purification with the TAC XT:
1. HEPA air purification in combined room heating applications
The TAC XT in an unbeatable universal solution for mobile heating applications with additional air purification. For this reason, the device is ideally suited for the use in mobile hospitals and emergency camps, workshops, in party tents or for other indoor events.
Especially in the time between seasons, in spring and autumn, the air can become unexpectedly cool in the evening. During these times, the thermostat-controlled TAC XT works as a 'compensation heater' and automatically fills the surrounding cold areas with draught-free warmth evenly and pleasantly. This way, the heater can either be used autonomously or to complement existing heating systems.
The additional HEPA air purification function of the TAC XT does not only prevent the air from excessive cooling but also from polluted and germ-laden air:
Wherever many people meet, the concentration of pathogens rises in the ambient air. Recent scientific studies indicate that "coughed up pathogens will spread for several metres within a few seconds and remain infectious in the room air up to 5 minutes."
Thanks to its high-performance air purification function, the TAC XT creates passing and staying zones with air filtered from viruses – directly at the installation site and for patients, guests, customers and employees. The target areas are continuously refilled with purified air which significantly decreases the risk of infection in these zones in comparison to non-treated areas.
With the integrated HEPA air purification function, the TAC XT does not only provide for a pleasant all-round warmth but for all-round clean room air as well. This dual function of the TAC XT is unbeatable!
2. HEPA air purification alternating with decontamination treatments
If the TAC XT is used during the day as a room heater or virus air cleaner in waiting zones, corridors or other highly frequented areas to effectively reduce the risk of infection even in large rooms, then the TAC XT can be used outside business hours or at night, for example, to decontaminate rooms and equipment.
The H14 HEPA virus filter in the TAC XT is then automatically decontaminated during the decontamination interval. This way, it can be used as decontaminated air cleaner for upcoming events where it will filter viruses from the air. This means that the TAC XT is provided with a self-regeneration function in order to fight viruses permanently.
Application area HEPA air purification – practical benefits:
- Constant air pollution control and virus filtration in zones with a high volume of public traffic
- Unique technology – Trotec exclusive:
Automatic filter regeneration thanks to thermal decontamination of the specially developed and heat-resistant high-efficiency particulate air filter of class H14. Provides separation efficiency of 99.995 % for particle sizes of 0.1 to 0.2 μm - Effective air filtration with F7 prefilter and H14 HEPA main filter
- Air discharge directions can be adjusted via flowstop shutter in order to direct the air into the desired areas, all tailored to the individual requirement
- Combined use of professional HEPA H14 air purification and heating is possible. For purified warm air that is free from suspended matter carrying odours
- Simple operation: Fully automatic and low-maintenance operation around the clock
- Resource-efficient: 100 % environmentally friendly, no chemicals, no staff expenses
It's all about the TAC – always the optimum virus air cleaner for every demand
Which TAC high-performance air purifier from Trotec offers you exactly the functions and equipment features you require for your application? The comparison table below shows you an overview of all Trotec air purification solutions, focusing on their application and technical differences ...
Possible applications and equipment differences of TAC high-performance air purifiers at a glance
| Trotec high-performance air purifiers with HEPA H14 suitability in compliance with EN 1822 (corresponds to ISO 45 H according to ISO 29463) |  |
 |
 |
 |
 |
|---|---|---|---|---|---|
| TAC XT | TAC V+ | TAC M | TAC ECO | TAC BASIC | |
| Use for high-performance H14 HEPA air purification as per EN 1822 | ✓ | ✓ | ✓ | ✓ | ✓ |
| Integral silencer | ✓ | ✓ | ✓ | ✓ | ✓ |
| Stationary stand version | – | ✓ | ✓ | ✓ | ✓ |
| Mobile carriage design | ✓ | ✓ | ✓ | ✓ | – |
| Usage-related filter change indicator for prefilter and HEPA filter | ✓ | ✓ | ✓ | ✓ | – |
| FlowMatic volumetric flow control | ✓ | ✓ | ✓ | – | – |
| Programmable touch display updateable via USB | ✓ | ✓ | ✓ | – | – |
| Thermal filter decontamination and filter regeneration | ✓ | ✓ | – | – | – |
| Use for room heating, tent heating (heating capacity 18/27 kW) | ✓ | – | – | – | – |
| Use for thermal decontamination of rooms and objects | ✓ | – | – | – | – |
| Use for thermal disinfestation | ✓ | – | – | – | – |
| Trotec high-performance air purifiers with HEPA H14 suitability in compliance with EN 1822 (corresponds to ISO 45 H according to ISO 29463) | TAC XT | TAC V+ | TAC M | TAC ECO | TAC BASIC |
|---|---|---|---|---|---|
| Use for high-performance H14 HEPA air purification as per EN 1822 | ✓ | ✓ | ✓ | ✓ | ✓ |
| Integral silencer | ✓ | ✓ | ✓ | ✓ | ✓ |
| Stationary stand version | – | ✓ | ✓ | ✓ | ✓ |
| Mobile carriage design | ✓ | ✓ | ✓ | ✓ | – |
| Usage-related filter change indicator for prefilter and HEPA filter | ✓ | ✓ | ✓ | ✓ | – |
| FlowMatic volumetric flow control | ✓ | ✓ | ✓ | – | – |
| Programmable touch display updateable via USB | ✓ | ✓ | ✓ | – | – |
| Thermal filter decontamination and filter regeneration | ✓ | ✓ | – | – | – |
| Use for room heating, tent heating (heating capacity 18/27 kW) | ✓ | – | – | – | – |
| Use for thermal decontamination of rooms and objects | ✓ | – | – | – | – |
| Use for thermal disinfestation | ✓ | – | – | – | – |
TAC high-performance air purifiers – show more technical data
| TAC high-performance air purifiers – more technical data at a glance | |
|
|
|
|
|---|---|---|---|---|---|
| TAC XT | TAC V+ | TAC M | TAC ECO | TAC BASIC | |
| Max. air flow rate heating (without HEPA filter) | 2,500 m³/h | - | - | - | - |
| Max. air volume flow for the respective filter class |
with HighFlow H14 HEPA Heat Resistant filter: H14 ≤ 1,200 m³/h, H13 ≤ 2,100 m³/h |
H14 ≤ 1,000 m³/h H13 ≤ 1,600 m³/h |
|||
| Prefilter | G4 Z-line (EN 779:2002) |
F7 (EN 779:2002), ePM10 85 % (ISO 16890) | G4 Z-line (EN 779:2002) |
||
| High-temperature particulate air filter |
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822 Fully encapsulated H14 HighFlow metal lamellae high-temperature filter “made in Germany” Each filter is tested and certified individually. |
TROTEC HEPA H14, EN 1822 (standard minipleat) Each filter is tested and certified individually. |
|||
| Filter change interval |
approx. 2 to 4 years (depending on the application and with regular thermal decontamination) |
approx. 1 to 3 years (depending on the application) |
approx. 1 to 2 years (depending on the application) |
max. 1 to 2 years | |
| Filter change indication | Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter | - | |||
| FlowMatic control |
Constant clean air volume flow, constant circulation rates in each power level also with increasing filter contamination. Air volume freely adjustable in m³. |
– | |||
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
Time freely programmable, the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours. Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required. Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination. |
No thermal decontamination and reconditioning of the filter |
|||
| Mains connection (connector plug) | 380–480 V 50 / 60 Hz (CEE 32 A) | 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F) | |||
| ø power consumption |
Air purification: 0.15 kW*, 1.25 kW (short-term peak load, e.g. once a week during thermal decontamination)
heating: max. 27 kW |
0.15 kW*, 1.25 kW (short-term peak load, e.g. once a week during thermal decontamination) |
0.15 kW* | ||
|
Exemplary total energy consumption (with 900 m³/h air volume) |
Without thermal decontamination approx. 1.2 kWh per day / approx. 24 kWh per month* With thermal decontamination approx. 1.4 kWh per day / approx. 28 kWh per month* and thermal decontamination once a week |
approx. 1.2 kWh per day / approx. 24 kWh per month* |
|||
| Control panel | Programmable, USB updateable touch display with PIN-protected lock function | Manual control panel (6-step switch) | |||
| Dimensions L x W x H With wheels and handle (mobile housing) |
690 mm x 630 mm x 1,300 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
690 mm x 630 mm x 1,130 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
– | ||
| Dimensions L x W x H (stationary housing) |
– |
506 x 523 x 1,100 mm to 2,300 mm ** |
|||
| Width with optional sound protection caps: 770 mm | |||||
| Weight (mobile housing) |
TAC XT 18: |
89 kg (incl. filter) | 86 kg (incl. filter) | 83 kg (incl. filter) | – |
| Weight (stationary housing) |
– | 85 kg (incl. filter) | 81 kg (incl. filter) | 78 kg (incl. filter) | 73 kg (incl. filter) |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment | |||||
| TAC XT |
| Max. air flow rate heating (without HEPA filter) |
| 2,500 m³/h |
| Max. air volume flow for the respective filter class |
|
with HighFlow H14 HEPA Heat Resistant filter: H14 ≤ 1,200 m³/h, H13 ≤ 2,100 m³/h |
| Prefilter |
| G4 Z-Line (EN 779:2002) |
| High-temperature particulate air filter |
|
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822 Fully encapsulated H14 HighFlow metal lamellae high-temperature filter “made in Germany” (optional also as Ultra-HighFlow filter). Each filter is tested and certified individually. |
| Filter change interval |
|
Approx. 2 to 4 years (depending on the application and with regular thermal decontamination) |
| Filter change indication |
| Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter |
| FlowMatic control |
|
Constant clean air volume flow, constant circulation rates in each power level also with increasing filter contamination. Air volume freely adjustable in m³. |
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
|
Time freely programmable, the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours. Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required. Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination. |
| Mains connection (connector plug) |
| 380–480 V 50 / 60 Hz (CEE 32 A) |
| ø power consumption |
|
Air purification: 0.15 kW*, 1.25 kW (short-term peak load, e.g. once a week during thermal decontamination)
heating: max. 27 kW |
|
Exemplary total energy consumption (with 900 m³/h air volume) |
| Without thermal decontamination approx. 1.2 kWh per day / approx. 24 kWh per month* With thermal decontamination approx. 1.4 kWh per day / approx. 28 kWh per month* and thermal decontamination once a week |
| Control panel |
| Programmable, USB updateable touch display with PIN-protected lock function |
| Dimensions L x W x H (mobile housing) |
| With wheels and handle: 690 mm x 630 mm x 1,300 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
| Dimensions L x W x H (stationary housing) |
| – |
| Weight (mobile housing) |
| TAC XT 18: 104 kg (incl. Filter) TAC XT 27: 109 kg (incl. Filter) |
| Weight (stationary housing) |
| – |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment |
| TAC V+ |
| Max. air flow rate heating (without HEPA filter) |
| - |
| Max. air volume flow for the respective filter class |
|
with HighFlow H14 HEPA Heat Resistant filter: H14 ≤ 1,200 m³/h, H13 ≤ 2,100 m³/h |
| Prefilter |
| F7 (EN 779:2002), ePM10 85 % (ISO 16890) |
| High-temperature particulate air filter |
|
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822 Fully encapsulated H14 HighFlow metal lamellae high-temperature filter “made in Germany” (optional also as Ultra-HighFlow filter). Each filter is tested and certified individually. |
| Filter change interval |
|
Approx. 2 to 4 years (depending on the application and with regular thermal decontamination) |
| Filter change indication |
| Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter |
| FlowMatic control |
|
Constant clean air volume flow, constant circulation rates in each power level also with increasing filter contamination. Air volume freely adjustable in m³. |
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
|
Time freely programmable, the thermal decontamination and filter regeneration process takes place fully automatically, usually once a week at night or outside business or teaching hours. Thermal decontamination and filter regeneration can be switched off temporarily or even constantly as required. Due to the short treatment duration (15 min.) and the low energy input (altogether approx. 1.0 kWh per cycle), the room temperature does not increase by thermal decontamination. |
| Mains connection (connector plug) |
| 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F) |
| ø power consumption |
| 0.15 kW*, 1.25 kW (short-term peak load, e.g. once a week during thermal decontamination) |
|
Exemplary total energy consumption (with 900 m³/h air volume) |
| Without thermal decontamination approx. 1.2 kWh per day / approx. 24 kWh per month* With thermal decontamination approx. 1.4 kWh per day / approx. 28 kWh per month* and thermal decontamination once a week |
| Control panel |
| Programmable, USB updateable touch display with PIN-protected lock function |
| Dimensions L x W x H (mobile housing) |
| With wheels and handle: 690 x 630 x 1,300 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
| Dimensions L x W x H (stationary housing) |
| 506 x 523 x 1,100 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
| Weight (mobile housing) |
| 89 kg (incl. Filter) |
| Weight (stationary housing) |
| 85 kg (incl. Filter) |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment |
| TAC M |
| Max. air flow rate heating (without HEPA filter) |
| - |
| Max. air volume flow for the respective filter class |
|
with HighFlow H14 HEPA Heat Resistant filter: H14 ≤ 1,200 m³/h, H13 ≤ 2,100 m³/h |
| Prefilter |
| F7 (EN 779:2002), ePM10 85 % (ISO 16890) |
| High-temperature particulate air filter |
|
TROTEC HEPA H14 HighFlow Heat Resistant filter, EN 1822 Fully encapsulated H14 HighFlow metal lamellae high-temperature filter “made in Germany” (optional also as Ultra-HighFlow filter). Each filter is tested and certified individually. |
| Filter change interval |
| Approx. 1 to 3 years (depending on the application) |
| Filter change indication |
| Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter |
| FlowMatic control |
|
Constant clean air volume flow, constant circulation rates in each power level also with increasing filter contamination. Air volume freely adjustable in m³. |
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
| No thermal decontamination and reconditioning of the filter |
| Mains connection (connector plug) |
| 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F) |
| ø power consumption |
| 0.15 kW* |
|
Exemplary total energy consumption (with 900 m³/h air volume) |
| approx. 1.2 kWh per day / approx. 24 kWh per month* |
| Control panel |
| Programmable, USB updateable touch display with PIN-protected lock function |
| Dimensions L x W x H (mobile housing) |
| With wheels and handle: 690 x 630 x 1,300 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
| Dimensions L x W x H (stationary housing) |
| 506 x 523 x 1,100 mm to 2,100 mm ** Width with optional sound protection caps: 770 mm |
| Weight (mobile housing) |
| 86 kg (incl. Filter) |
| Weight (stationary housing) |
| 81 kg (incl. Filter) |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment |
| TAC ECO |
| Max. air flow rate heating (without HEPA filter) |
| - |
| Max. air volume flow for the respective filter class |
| H14 ≤ 1,000 m³/h H13 ≤ 1,600 m³/h |
| Prefilter |
| G4 Z-line (EN 779:2002) |
| High-temperature particulate air filter |
| TROTEC HEPA H14, EN 1822 (standard minipleat) Each filter is tested and certified individually. |
| Filter change interval |
| Approx. 1 to 2 years(depending on the application) |
| Filter change indication |
| Usage-related, sensor-controlled filter change indicator for prefilter and HEPA filter |
| FlowMatic control |
| – |
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
| No thermal decontamination and reconditioning of the filter |
| Mains connection (connector plug) |
| 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F) |
| ø power consumption |
| 0.15 kW* |
|
Exemplary total energy consumption (with 900 m³/h air volume) |
| approx. 1.2 kWh per day / approx. 24 kWh per month* |
| Control panel |
| Manual control panel (6-step switch) |
| Dimensions L x W x H (mobile housing) |
| With wheels and handle: 690 x 630 x 1,130 mm to 2,300 mm ** Width with optional sound protection caps: 770 mm |
| Dimensions L x W x H (stationary housing) |
| 506 x 523 x 1,100 mm to 2,100 mm ** Width with optional sound protection caps: 770 mm |
| Weight (mobile housing) |
| 83 kg (incl. Filter) |
| Weight (stationary housing) |
| 78 kg (incl. Filter) |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment |
| TAC BASIC |
| Max. air flow rate heating (without HEPA filter) |
| - |
| Max. air volume flow for the respective filter class |
| H14 ≤ 1,000 m³/h H13 ≤ 1,600 m³/h |
| Prefilter |
| G4 Z-line (EN 779:2002) |
| High-temperature particulate air filter |
| TROTEC HEPA H14, EN 1822 (standard minipleat) Each filter is tested and certified individually. |
| Filter change interval |
| Max. 1 to 2 years |
| Filter change indication |
| – |
| FlowMatic control |
| – |
|
Safety and filter hygiene: Thermal decontamination and filter regeneration at approx. 100 °C. 15 min. heating-up phase / 15 min. decon phase (altogether 30 min.) |
| No thermal decontamination and reconditioning of the filter |
| Mains connection (connector plug) |
| 220–240 V 50 / 60 Hz (CEE 7/7, H07RN-F) |
| ø power consumption |
| 0.15 kW* |
|
Exemplary total energy consumption (with 900 m³/h air volume) |
| approx. 1.2 kWh per day / approx. 24 kWh per month* |
| Control panel |
| Manual control panel (6-step switch) |
| Dimensions L x W x H (mobile housing) |
| – |
| Dimensions L x W x H (stationary housing) |
| 506 x 523 x 1,100 mm to 2,100 mm ** Width with optional sound protection caps: 770 mm |
| Weight (mobile housing) |
| – |
| Weight (stationary housing) |
| 73 kg (incl. filter) |
| * for a 5-day week with 8 h operating time per day and 900 m³ air volume ** depending on the FlowExtender Silence+ attachment |
Available colour variants
| TAC XT |
| Available colour versions |
| Yellow |
| Also available as stainless steel version |
| ✓ |
| TAC V+ |
| Available colour versions |
| Yellow, basalt grey, white, bronze |
| Also available as stainless steel version |
| ✓ |
| TAC M |
| Available colour versions |
| Yellow, basalt grey, white, bronze |
| Also available as stainless steel version |
| – |
| TAC ECO |
| Available colour versions |
| Basalt grey |
| Also available as stainless steel version |
| – |
| TAC BASIC |
| Available colour versions |
| Basalt grey |
| Also available as stainless steel version |
| – |
Buy
/en_GB/1410000182/MULTI-AIRHANDLER-TAC-XT-27-140245-1630480123.jpg)
MULTI-AIRHANDLER TAC XT 27
6,099.95 £ incl. VAT Show net price (VAT not included)
/en_GB/1410000183/MULTI-AIRHANDLER-TAC-XT-18-140245-1630480123.jpg)
MULTI-AIRHANDLER TAC XT 18
5,599.95 £ incl. VAT Show net price (VAT not included)
MULTI-AIRHANDLER TAC XT 27
6,099.95 £ incl. VAT Show net price (VAT not included)
Technical data TAC XT 18
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.410.000.183 | |
| Dust class | ||
| as per DIN EN 1822 (ISO 45H filter ISO 29463) | H14 | |
| as per DIN EN 779:2002 | F7 | |
| Air flow rate | ||
| Max. air volume flow [m³/h] | 2,100 | |
| Recommended amount of air for HighFlow filter with filter class H14 ≤ [m³/h] | 1,200 | |
| Recommended amount of air for HighFlow filter with filter class H13 ≤ [m³/h] | 2,100 | |
| Heating capacity | ||
| Level Max. [kW] | 18 | |
| Temperature data | ||
| Max. air outlet temperature [°C] | 95 | |
| Room / surface target temperature [°C] | 75 | |
| Electrical values | ||
| Mains connection | 2 x 380 - 480 V/50 - 60 Hz | |
| Power input [kW] | 18 | |
| Nominal current consumption [A] | 15.9 | |
| Recommended fusing [A] | 32 | |
| Electric connection | ||
| Connection plug | 2 x CEE 16 A | |
| Sound values | ||
| Sound level in compliance with ISO 11203 | 35 – 59 dB | |
| Fan | ||
| Radial | ||
| axial | ||
| stages | 2 | |
| Dimensions | ||
| Length (with wheels and handle) [mm] | 690 | |
| Width (with wheels and handle) [mm] | 630 | |
| Height (with wheels and handle) [mm] | 1,300 | |
| Length Depending on the configuration (FlowExtender) [mm] | 690 | |
| Width Depending on the configuration (FlowExtender) [mm] | 630 | |
| Height Depending on the configuration (FlowExtender) [mm] | 2,300 | |
| Weight | ||
| (without packaging) - without HEPA filter [kg] | 93.1 | |
| Equipment, features and functions | ||
|---|---|---|
| Equipment | ||
| Thermal filter decontamination | ||
| Thermal filter regeneration | ||
| FlowMatic control | ||
| Operating hours counter | ||
| Temperature adjustment/target value setting | ||
| Temperature measurement of other rooms when connected to a ventilation system | ||
| Automatic switch-off upon reaching the set value | ||
| Self-regeneration function HEPA filter | ||
| Filter change indication | ||
| Timer function | ||
| Frost monitor function | ||
| Fan rundown function | ||
| Setting the room dimensions | ||
| Touchscreen | ||
| Screensaver | ||
| Steplessly adjustable thermostat | ||
| Overheating protection | ||
| Protective bar | ||
| Filter change indication | ||
| Pre-filter | ||
| Main filter | ||
| Mobility | ||
| Carriage design | ||
| Carry/transport handle(s) | ||
| Wheels | ||
| Feet | ||
| Cable winder | ||
standard equipment
optionally available
not available
Technical data TAC XT 27
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.410.000.182 | |
| Dust class | ||
| as per DIN EN 1822 (ISO 45H filter ISO 29463) | H14 | |
| as per DIN EN 779:2002 | F7 | |
| Air flow rate | ||
| Max. air volume flow [m³/h] | 2,100 | |
| Recommended amount of air for HighFlow filter with filter class H14 ≤ [m³/h] | 1,200 | |
| Recommended amount of air for HighFlow filter with filter class H13 ≤ [m³/h] | 2,100 | |
| Heating capacity | ||
| Level Max. [kW] | 27 | |
| Temperature data | ||
| Max. air outlet temperature [°C] | 95 | |
| Room / surface target temperature [°C] | 75 | |
| Electrical values | ||
| Mains connection | 2 x 380 - 480 V/50 - 60 Hz | |
| Power input [kW] | 27 | |
| Nominal current consumption [A] | 27.9 A, 13.3 A | |
| Recommended fusing [A] | 32 | |
| Electric connection | ||
| Connection plug | CEE 32 A, CEE 16 A | |
| Sound values | ||
| Sound level in compliance with ISO 11203 | 35 – 59 dB | |
| Fan | ||
| Radial | ||
| axial | ||
| stages | 2 | |
| Dimensions | ||
| Length (with wheels and handle) [mm] | 690 | |
| Width (with wheels and handle) [mm] | 630 | |
| Height (with wheels and handle) [mm] | 1,300 | |
| Length Depending on the configuration (FlowExtender) [mm] | 690 | |
| Width Depending on the configuration (FlowExtender) [mm] | 630 | |
| Height Depending on the configuration (FlowExtender) [mm] | 2,300 | |
| Weight | ||
| (without packaging) - without HEPA filter [kg] | 96 | |
| Equipment, features and functions | ||
|---|---|---|
| Equipment | ||
| Thermal filter decontamination | ||
| Thermal filter regeneration | ||
| FlowMatic control | ||
| Operating hours counter | ||
| Temperature adjustment/target value setting | ||
| Temperature measurement of other rooms when connected to a ventilation system | ||
| Automatic switch-off upon reaching the set value | ||
| Self-regeneration function HEPA filter | ||
| Filter change indication | ||
| Timer function | ||
| Frost monitor function | ||
| Fan rundown function | ||
| Setting the room dimensions | ||
| Touchscreen | ||
| Screensaver | ||
| Steplessly adjustable thermostat | ||
| Overheating protection | ||
| Protective bar | ||
| Filter change indication | ||
| Pre-filter | ||
| Main filter | ||
| Mobility | ||
| Carriage design | ||
| Carry/transport handle(s) | ||
| Wheels | ||
| Feet | ||
| Cable winder | ||
standard equipment
optionally available
not available
Accessories
Loading...
Alternative products
Loading...
Seminars
Downloads
Loading...
Brochures
Loading...