Desiccant dehumidifier TTR 300
The mobile dehumidifier TTR 300: Maximised performance with minimised dimensions and weight
Define dehumidification capacity and consequently power consumption and noise generation variably
Due to the very good dehumidification performance even at low dew points, the TTR 300 quality dehumidifier is a dryer for flexible use for humidity regulation in production areas and storerooms as well as for protection against corrosion and condensation in humidity-sensitive environments and facilities.
The advanced electronic Monoventic air volume regulation of the TTR 300 allows infinite, demand-oriented regulation of the required dry air volume.
Dehumidification performance and thus power consumption as well as noise emission of the TTR 300 can therefore be defined as required at any time, e.g. for smaller rooms or applications for which only small volumes of air are required.
The TTR 300 is also the perfect solution to be installed in intermediate ceilings. Due to the wide range of TTR system accessories, hose or pipe connections can be connected to the regeneration air inlet on the TTR 300 or different Z-line filters of different filter classes can be used for the dehumidifier for separate air supply.
All filters can be changed quickly and easily without opening the device.
German product design from Trotec
A standard DIN socket for external switchings allows to control the TTR 300 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.
In addition to integrated heat recovery, the standard equipment of the TTR 300 desiccant dehumidifier also includes a self-regulating electronic regeneration air heating consisting of thermistor elements (PTC) whose performance capacity depends on air inlet temperature and regeneration air volume.
The advantage of this solution lies for one in an optimal performance matching and in the fact that overheating is not possible, making a safety thermostat superfluous.
The standard operating hours counter of the TTR 300 is optionally available as a dual counter for operating and kilowatt hours.
Working principle of the TTR 300 adsorption dehumidifier
A fan for process and regeneration air is placed in front of the rotor. A partial flow of the dry air is used for regeneration.
All TTR adsorption dehumidifiers have reliable silica gel sorption rotors in washable and mechanically highly stable design. The chemical stability of silica gel guarantees that water vapor or clear water will not destroy the rotor. Light impurities such as dust only lead to a reduced dehumidification performance.
Depending on the design of the Trotec adsorption dehumidifiers, process and regeneration air are channeled in different ways.
THE FUNCTIONAL PRINCIPLE OF THE TTR DEHUMIDIFIERS AT A GLANCE
TTR 300 – Special equipment features
Application examples from practical experience:
All mobile TTR adsorption dehumidifiers in direct comparison:
In order to find exactly the right mobile adsorption dehumidifier for you, you have the possibility here to clearly compare all adsorption dehumidifiers of the TTR series from Trotec.
Models that you do not want to include in the comparison can simply be clicked away.
A few practical benefits:
- Professional quality „made in Germany“ – Originally produced by Trotec
- Monoventic air volume regulation: Advanced control electronics allow a precise and infinite adjustment of the dry air volume
- Up to 30 % lighter than competitive models with the same performance
- Maximum of performance with minimum of dimensions and weight
- Extremely low in maintenance
- Stackable to save space
- Tried and tested German industrial design – protected prototype
Trotec: Innovation made in Germany
Take a look behind the scenes:
As one of the internationally leading manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, dehumidification, heating, air conditioning and ventilation. We rely 100 % on research, development, design and production in Germany for our high-performance devices. For the highest quality requirements, sophisticated system solutions and fresh ideas.
|Dry air (in case of intake air 20°C / 60 % RH)|
|Min. air volume [m³/h]||80|
|Max. air volume [m³/h]||280|
|Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h]||200|
|External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa]||100|
|Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH)||100|
|Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm]||100|
|Nominal air volume | Regeneration air [m³/h]||30|
|External compression | Regeneration air [Pa]||50|
|Connection outlet Ø | Regeneration air [mm]||50|
|Operating principle||TTR Bisorp Mono|
|Min. temperature [°C]||-15|
|Max. temperature [°C]||35|
|Min. humidity [% RH]||0|
|Max. humidity [% RH]||100|
|Mains connection||230 V, 50/60 Hz|
|Nominal current consumption [A]||3.9|
|Power input [kW]||0.9|
|Power input heating [kW]||0.85|
|Recommended fusing [A]||16|
|Connection plug||CEE 7/7|
|Cable length [m]||2.5|
|Distance 1 m [dB(A)]||61|
|Length (packaging excluded) [mm]||355|
|Width (packaging excluded) [mm]||310|
|Height (packaging excluded) [mm]||355|
|(packaging excluded) [kg]||12|
|Equipment, features and functions|
|Metal plastic composite housing|
|Non-marking rubber feet|
|Swivel casters with brake|
|Trestle rollers/ fixed castors|
|Non-marking rubber wheels|
|Crane lifting gear|
|Air volume regulation|
|Operating hours counter|
|DIN socket for external ON/OFF|
|Integrated heat recovery|
|Self-regulating PTC electric heating|
|Moisture and temperature registration|
|Sensor-supported FlowMatic control|
|Variable-speed rotor drive|
|Terminals for external ON/OFF|
|Regeneration heating design|
|Indoor installation (standard)|
|Shelter against the weather|