Garden pump TGP 1000 E
  1. Products & Services
  2. Pumps
  3. Garden pumps
  4. TGP 1000 E

Garden pump TGP 1000 E

Powerful 1,000 W pump for all watering applications!


It usually takes a lot of effort to irrigate a large area of lawn, flowerbeds, shrubbery and trees evenly. Not with the garden pump TGP 1000 E – it is a top-notch aid in accomplishing these tasks. The solid, yet ultra-light entry-level model in compact design comes with a rust-proof pump housing made of impact-resistant plastic. 

With impressive 1,000 watts of power it can be used to pump up to 3,300 litres of service water per hour. The pump can suck up water from a lower position up to a suction head of 7 metres. This includes ponds, wells, cisterns or even running water such as streams. The pump can convey the sucked-in water up to a delivery head or range of 42 metres. 

Extremely versatile.

By connecting a hose distributor you can simultaneously water multiple zones through sprinklers, spray guns or micro drip systems. This garden pump is also a convenient tool for the seasonal draining or recirculation of water from ponds or water barrels.


The pump housing of the TGP 1000 E is splash-proof from all directions as per protection type IPX4 and made of impact-resistant plastic and of metal coated with protective paint. The corrosion-resistant aluminium winding motor and high-quality ceramic face seal guarantee a long lifetime. At the suction and pressure connections the pump has a solid metal threading with an inner diameter of 1'' or 3.33 cm (G1). The integrated thermal protection circuit prevents the maintenance-free motor from overheating.

All-in-one solution supplied ready for connection. 

The pump can be switched on or off manually at a switch. Owing to the large inlet opening the pump can quickly and easily be filled with a little water prior to start-up. When storing the device for an extended period of time, e.g. during the winter, any residual water can easily be discharged via the water drain screw – as a result, the TGP 1000 E is protected against potential frost damage. 

High degree of flexibility using either permanent installations or devices for mobile application

Garden pumps are suitable for both: they can be permanently installed or used as mobile devices. This makes them extremely versatile. With the ergonomically shaped carrying handle the garden pump can quickly and easily be transported to the desired application site. We recommend permanently installed versions when the pump is always used at the same location. Should it, for instance, always be used for pumping water from a cistern, a fixed installation that can be accomplished in just a few steps is the best choice. For stationary operation at a fixed location we also supply a stable pump foot with bore holes for secure fastening.


A garden always needs water. Be it for watering, cleaning or recreational activities. But instead of using expensive and elaborately treated drinking water you can employ the garden pump TGP 1000 E and save money by making use of the abundant supply of rain or ground water nature delivers to your home for free. 

The economical all-rounder – not just for pumping applications in the garden

Regardless of whether you want to pump water from a well, cistern, rain barrel or a body of flowing water – at the push of a button the powerful pump supplies free water for work with a high-pressure cleaner, e.g. to clean terraces or walkways or else as a means to car valeting.

When no drinking water quality is required, the garden pump TGP 1000 E can draw water from alternative sources and so reduce the consumption costs in your garden.

Special equipment features of the TGP 1000 E

TGP 1000 E – high pump capacity
With impressive 1,000 watts of power the TGP 1000 E can be used to pump up to 3,300 litres per hour or 55 litres per minute.
TGP 1000 E – convenient on/off switch
The ON/OFF switch is installed readily accessible at the side of the pump and comes with a protective cover.
TGP 1000 E – ergonomic carrying handle
By means of the convenient carrying handle the pump can quickly and easily be transported from one application site to the next.
TGP 1000 E – affixable pump foot
For permanent stationary application the garden pump can be firmly affixed via bore holes in the pump foot.
TGP 1000 E – robust design
Robust design: According to protection type IPX4 the pump housing is splash-proof from all directions and made of impact-resistant plastic. The elements coated with yellow protective paint are made of metal.
TGP 1000 E – maintenance-free aluminium winding motor
The garden pump comes equipped with a high-quality ceramic face seal, robust metal threading at the suction and pressure side, its maintenance-free aluminium winding motor has a high corrosion resistance and an integrated thermal protection circuit prevents overheating.
TGP 1000 E – pump is easily filled
Owing to the large inlet opening the pump can be filled quickly and easily. Any residual water can easily be discharged without the need for tools via the water drain screw.
TGP 1000 E – delivery head and suction head
The garden pump TGP 1000 E comes with a maximum delivery head of 42 metres and a maximum suction head of 7 metres.

Technical data by comparison

All garden pumps in direct comparison:

To find the garden pump which exactly meets your requirements, please consult the concise overview of all garden pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 1,000 watts of power for pumping up to 3,300 litres per hour
  • Maximum delivery head: 42 m
  • Ideally suited for withdrawal, recirculation and suction of water e.g. in rain barrels, cisterns and garden ponds
  • Effortless watering of the garden in continuous mode until manual switch-off
  • Pump housing made of impact-resistant plastic and high corrosion resistance due to aluminium winding motor
  • Stable metal threads both on the suction and pressure side
  • High-quality ceramic face seal for a long lifetime
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • IPX4 type of protection for the pump – splash-proof from all directions
  • IP44 type of protection for the mains plug – splash-proof
  • User-friendly thanks to the large inlet opening for easy filling of the pump
  • Protected against frost – residual water can be discharged conveniently via the water drain screw
  • Convenient on/off switch
  • Integrated carrying handle for quick operational readiness at various locations
  • Stable pump foot with holes for easy fastening
  • TÜV-tested quality

All important features at a glance

Clean water
Ground water
Powerful 1,100 W motor
Flow rate of 3,300 litres per hour
Feed pressure of 4.2 bar
Delivery head of 42 metres
7 metres suction head
Clean water with particle sizes of up to 2 millimetres
1" threaded connection
Cable length: 1.2 metres
For pumping ground water
For the application in swimming pools
For the application in garden ponds
For the application in wells

Delivery head and flow rate of the TGP 1000 E

Delivery head and flow rate of the TGP 1000 E

Best quality guarantee

With the TGP 1000 E you are always on the safe side, for this garden pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: these are some of the quality features of Trotec's garden pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

Tested for safety, TÜV GS ID 1419076674

A suitable pump for any application scenario

Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E, TWP 7505 E and TWP 9005 E recommend themselves with a delivery head of up to 11.5 metres and flow rates ranging up to 14,000 litres per hour. TWP 4005 E TWP 7505 E TWP 9005 E With a delivery head of up to 11 metres and flow rates of up to 15,000 litres per hour the submerged waste water pumps TWP 4025 E, TWP 7025 E and TWP 11025 E from Trotec are also suitable for pumping contaminated water. TWP 4025 E TWP 7025 E TWP 11025 E Ground water can be extracted using either of the Trotec deep well pumps TDP 5500 E and TDP 7500 E. They offer delivery heads of up to 93 metres and flow rates ranging up to 6,000 litres per hour. Without difficulty the domestic water supply system TGP 1025 E can be integrated into an existing domestic supply network and reaches a delivery head of 30 metres as well as a flow rate of 3,300 litres per hour.


Garden Pump TGP 1000 E show in Trotec online shop

Garden Pump TGP 1000 E

The powerful garden pump TGP 1000 E delivers up to 3,300 L / h. Because it can pump up to 3,300 liters of industrial water per hour from rain barrels, cisterns and stagnant and flowing waters and reuse for irrigation of home and garden.

You save: 51 %

87.37 £ 42.55 £ incl. VAT Show net price (VAT not included)


Technical data

Technical data
General information
  Article number 4.610.000.105
Electrical values
  Mains connection 230 V/50 Hz
  Power input [W] 1,000
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
Performance data
  Max. conveying capacity [l/h] 3,300
  Feed pressure [bar] 4.2
  Grit of pump [mm] 2
  Max. delivery head [m] 42
  Max. suction height [m] 7
  Automatic switch-on
  Automatic switch-off
  Max. water temperature [°C] 35
  Pressure connection 1"
  Suction connection 1"
Safety feature
  Type of protection IPX4
  Protection class I
Sound values
  Sound pressure level [dB(A)] 72
  Sound power level [dB] 88
  Uncertainty (K) [dB] 2
Housing design
  Plastic version
  Metal design
  Length (packaging excluded) [mm] 210
  Width (packaging excluded) [mm] 330
  Height (packaging excluded) [mm] 200
  (packaging excluded) [kg] 6
Equipment, features and functions
Functions and features
  ON/OFF switch
  Automatic switch-on and switch-off Not available
  Electronic pressure switch optional
  Thermal overload protection [° C] 150
  Water inlet opening
  Water drain screw
  Backflow preventer
  Stainless steel screws
  Suitable for both permanent operation (>10h) or salt-water operation
  Dry run protection
  Overheating protection Available
  Connection at pressure tank for pressure compensation
Standard scope of delivery
Accessories scope of delivery
  Carrying handles
  Suitable for hose (hose DN)
  Suitable for thread
  Backflow preventer
  Tear-resistant nylon cord, 12 m

 standard equipment

 optionally available

 not available



Alternative products