Submerged waste water pump TWP 7025 E
Handles even high feed rates with power and reliability
Impressive 750 watts of power for pumping up to 13,000 litres per hour
The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour.
Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.
A remarkable pump capacity – from 7 metres down to 35 mm
The thoroughly robust submerged pump is accommodated in a watertight encapsulated and impact-resistant plastic housing and is suitable for underwater application to an immersion depth of 7 metres. The pump can start operation as of a minimum operating depth of 115 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm. Besides water withdrawal for operating a garden irrigation system, water removal after flooding and other fields of application involving contaminated water, the TWP 7025 E is also suited for transporting clear water.
Above that, the compactly designed TWP 7025 E is perfectly equipped for long-term applications, for the pump comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.
Whether in automatic or manual mode – the TWP 7025 E always guarantees optimal handling
Due to its steplessly lockable float switch, the TWP 7025 E allows you to choose between automatic mode and manual continuous operation. In automatic mode, the device is switched on or off depending on the preselected water level, while the dry run protection stops pump operation automatically if the water level drops too low. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.
The flexible elbow, which can be set to various positions as required to allow for hoses and pipes to run parallel to the ground, is fitted with universal connections for 25 mm and 32 mm inner diameters as well as with 1" and 1½" threaded connections. A stable, ergonomic carrying handle additionally facilitates the handling of the powerful submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to the 10 metre connecting cable the pump can be quickly installed, and using the suspension cord it can be easily lowered into even great depths and raised again when required.
Special equipment features of the TWP 7025 E
TWP 7025 E - the power pack among the submerged pumps
All submerged pumps in direct comparison:
To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 750 watts of power for pumping up to 13,000 litres per hour
- Maximum pump height: 9 m
- Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
- For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
- Extremely durable due to ceramic face seal
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Dry run protection during automatic operation
- Fixing option for the float switch during automatic operation
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Large ergonomic carrying handle – suitable for fastening the lowering cable
- Submerged pump of TÜV-tested quality
All important features at a glance
With the TWP 7025 E you are always on the safe side, for this submerged waste water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
This power house reliably pumps the water with up to 25 mm dirt particles up to a discharge height of 9 meters. It also makes it easy to move the water into the next higher floor and thus out of the house in the case of submerged basements after flooding.
You save: 48 %
72.79 £ 37.82 £ incl. VAT Show net price (VAT not included)
|Mains connection||230 - 240 V/50 Hz|
|Power input [kW]||0.75|
|Connection plug||CEE 7/4 (Schuko plug type F)|
|Cable length [m]||10|
|Max. conveying capacity [l/h]||13,000|
|Grit of pump [mm]||25|
|Max. delivery head [m]||9|
|Max. submersion depth [m]||7|
|Minimum operating depth [mm]||115|
|Max. water level after suction [mm]||35|
|Max. water temperature [°C]||35|
|Type of protection||IPX8|
|Functions and features|
|On/off switch (float switch)||Automatic|
|Switch-on point float switch [mm]||500|
|Switch-off point float switch [mm]||250|
|Thermal overload protection|
|Stainless steel screws|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Accessories scope of delivery|
|Hose connection (inner diameter)||25 / 32 mm|
|Threaded connection||1" , 1 ½"|
|Length (packaging excluded) [mm]||220|
|Width (packaging excluded) [mm]||160|
|Height (packaging excluded) [mm]||355|
|(packaging excluded) [kg]||5.2|