Submerged waste water pump TWP 7536 E
Power pack (max. 12,500 l/h) for pumping out waste water indoors and outdoors – with an adjustable residual water level
The power pack for pumping water in the house, garden and business
As wonderful as the summer with its warm temperatures may be, it also has a dark side. If it is permanently too hot, the lovingly tended garden plants will die of thirst and the formerly green lawn will burn in the blazing heat unless it is watered for several hours every day. The submerged waste water pump TWP 7536 E provides a remedy here, for it enables you to pump freely available service water (with dirt particles sized up to 25 mm) from the garden pond, a stream or a rainwater cistern for watering your garden. Conversely, the submerged pump also helps when it rains too much. Continuous rainfall and storms in summer are a frequent cause of flooded streets, water flooding in the garage and cellars full of waste water. Blessed is one who is prepared for such capricious weather conditions. With the robust pump TWP 7536 E, which is protected against the ingress of water by IPX8 type of protection, you can dry out even heavily flooded basements and garages in the shortest possible time.
Rises to every challenge and water quantity
Whether for pumping out the basement after continuous heavy rain or for using free service water from ponds, streams and rainwater cisterns for watering the garden – the 750 W submerged pump TWP 7536 E is an indispensable helper for homeowners and hobby gardeners for quickly pumping out or recirculating large quantities of waste water.
Submerged waste water pumps of the TWP series at a glance
One of the most important criteria when selecting a submerged waste water pump is the pump capacity. Therefore, before purchasing, check whether the flow rate and delivery head are suitable for your application. Submerged pumps with a lower flow rate, such as our TWP 4036 E, are also available from Trotec, just like pumps with a higher output and high-quality stainless steel design, e.g. the TWP 9000 ES and TWP 11000 ES.
Continuous operation and manual operation with preselected switch-on/switch-off height
The submerged pump, which is equipped with a watertight (encapsulation) and impact-resistant plastic housing, is designed for underwater application to an immersion depth of 7 metres. From a water level of 85 mm, the submerged pump starts pumping until the residual water level of max. 40 mm is reached. In addition, the submerged pump can be used in manual operation with an individually preset switch-on and switch-off height. A float switch lock on the pump housing allows individual adjustment of the pumping height within a defined range. If the otherwise freely movable float switch is fixed, the TWP 7536 E will pump water continuously.
Universal connection for hoses, pipes and plug-in systems
With the submerged waste water pump TWP 7536 E you can go for "all in one" instead of "either or" when it comes to choosing the connection options. No matter whether you want to connect the pump to a garden hose, an existing piping or irrigation system – the TWP 7536 E offers almost unlimited compatibility. The submerged pump allows the connection of hoses, tubes and plug-in systems with different diameters, with and without threaded connections. The reduction required for this is already included in the scope of delivery with various connection sizes.
Flexible all-rounder: 360° elbow with Quick-Connect connection
The convenient elbow will turn your head. With it, hose, tube or plug-in systems can be attached to the pump quickly and easily with just one movement and flexibly positioned at any angle. Simply plug it in and remove it again at the push of a button when the work is done.
Connection options of the TWP 7536 E:
- Hose connection for an inner diameter of 25 mm or 38 mm
- Hose and pipe connection for internal threads G1"/DN25 or G1½"/DN40
For self-pumped water and drainage work – everywhere
With the carrying handle integrated in the pump housing, the pleasantly compact and only 5 kg light TWP 7536 E offers extreme mobility in the garden or at other locations. Additionally, the handle serves as a suspension for the nylon cord (10 m) included in the scope of delivery to lower the submerged pump into wells, cisterns or other basins.
Tested for safety for long-lasting use
The submerged pumps of the TWP series are robust and durable pumps designed for continuous operation in harsh environments. The motors, which are both powerful and maintenance-free, have an integrated thermal protection circuit to gently switch off the pump technology in the unlikely event of overheating.
Extensive accessory set – already included in the scope of delivery
Why pay extra for something when it is already included in Trotec's scope of delivery? The submerged waste water pump TWP 7536 E is supplied ready for connection including all necessary accessories:
- 1 x Submerged waste water pump TWP 7536 E
- 1 x Reducer for hoses with inner diameters of 25 mm or 38 mm as well as hose connections with G1"/DN25 internal thread
- 1 x Elbow for hose connections with G1½"/DN40 internal thread
- 1 x Quick connection for elbow
- 1 x Nylon cord (10 m)
- 1 x Manual
Unpack, plug in and get started!
With the submerged pump TWP 7536 E you can rely on top performance when pumping out or recirculating large quantities of water in the garden or in flooded basements.
Special equipment features of the TWP 7536 E
The TWP 7536 E is extremely versatile
All submerged pumps in direct comparison:
To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 750 watts of power for pumping up to 12,500 litres per hour
- Maximum delivery head: 8 m
- Ideally suited for the withdrawal, recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
- For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Fixing option for the float switch for automatic operation
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Incl. 360° elbow and hose adapter
- Easy hose connection thanks to Quick-Connect system
- Large ergonomic carrying handle – suitable for fastening the suspension cord
All important features at a glance
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Differences between our submerged waste water pumps TWP 7025 E and TWP 7536 E
Submerged pump: | TWP 7025 E | TWP 7536 E |
---|---|---|
Particle size | 25 mm | 25 mm |
Residual water level | 35 mm | 40 mm |
Quick-Connect connection for elbow | — | |
Inner hose diameter | 25 / 32 mm | 25 / 38 mm |
Threaded connectors | 1" / 1½" | 1" / 1½" |
Backflow stop valve | — | — |
standard equipment
optionally available
not available
Buy
Submersible waste water pump TWP 7536 E DEAL
You save: 38 %
69.95 £
42.99 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 4.610.000.054 | |
Electrical values | ||
Mains connection | 230 - 240 V, 50 Hz | |
Power input [W] | 750 | |
Electric connection | ||
Connection plug | CEE 7/4 | |
Cable length [m] | 10 | |
Performance data | ||
Max. conveying capacity [l/h] | 12,500 | |
Grit of pump [mm] | 25 | |
Max. delivery height [m] | 8 | |
Max. submersion depth [m] | 7 | |
Minimum operating depth [mm] | 85 | |
Max. water level after suction [mm] | 40 | |
Max. water temperature [°C] | 35 | |
Safety feature | ||
Type of protection | IPX8 | |
Protection class | I | |
Functions and features | ||
On/off switch (float switch) | Automatic | |
Switch-on point float switch [mm] | 600 | |
Switch-off point float switch [mm] | 150 | |
Thermal overload protection | ||
Backflow preventer | ||
Suitable for both permanent operation (>10h) or salt-water operation | ||
Housing design | ||
Plastics | ||
Accessories scope of delivery | ||
Adapter | ||
Hose connection (inner diameter) | 25 / 38 mm | |
Threaded connection | 1";1 ½" | |
Backflow preventer | ||
Dimensions | ||
Length (packaging excluded) [mm] | 220 | |
Width (packaging excluded) [mm] | 160 | |
Height (packaging excluded) [mm] | 370 | |
Weight | ||
(packaging excluded) [kg] | 5 |
standard equipment
optionally available
not available