Technology, sales, invoices:
Ask our specialists.
2-in-1 system for cable laying and route location
The LTC system not only allows you to track routes or locate pipe blockages in indoor installations, but you can also pull in cables.
Even in places where other pull tools have failed, the LTC system surmounts angular routes without problems, even in pipe systems with cables and over long distances.
The robust housing has a practical accessory space and a built-in replaceable slip ring for connecting common transmitter units.
Because there are no moving external parts attached to the LTS housing, no dust or dirt particles can gather here to impair the function or durability.
The crank integrated at the rear renders rewinding the 20- or 30-metre push cable mere child's play and the fibreglass-reinforced cable outlet with return stop prevents the cable from being accidentally reeled all the way into the housing.
Easily manages even narrower bends
The optimized rod end (1) of the LTC system increases the bending characteristics of the Polykat fibreglass profile at the transition between rod end and cable. In combination with the improved flexi-probe (2), the rod end not only reduces the risk of a rod breakage but also allows for yet smaller bending radii of up to 30 mm without a loss of thrust stability. The shortened brass insert – in connection with a high-performance plastic – ensures an optimized force transmission during insertion.
Also suited for locating routes
Copper conductors are built into the fibreglass cable of the locating systems, which, when connected to the transmitter, emit a locatable signal along the entire length of the cable. To do so, a transmitter cable is connected at the LTC and the second is grounded.
The illustration shows an ST-510 transmitter and an SR-24 receiver by way of example. The locating system allows the use of common transmitters and receivers in the 33 kHz range.
Accessories contained in scope of delivery:
- One ø 7 mm and one ø 10 mm flexi-probe
- Five brass pulling heads with M5 thread (ø 6 mm) and eyelet
- One cable grip with swivel for ø 6 - 9 mm cables
- Three brass connection sleeves
- Two rod ends with external M5 thread
- One special fibreglass adhesive (3 g) for push cable repair
Additional accessories available on request.