Industrial condenser dryer DH 145 SH
The ultimate industrial condensation dryer DH 145 SH with an analogue hygrostat dehumidifies an enormous 475 liters per day
Reliable dryer with high dehumidification capacity
Owing to its high dehumidification performance of up to 475 litres per day, this standard industrial dryer is a particularly economical solution for keeping stored goods dry and to prevent damages caused by mould as well as corrosion during industrial processes.
This condenser dryer's standard equipment includes a hot gas automatic defrost system, an integrated condensate pump with a pump height of up to 4 metres, a residual water draining function as well as pressure gauge indicators for a maintenance-friendly early fault detection. Moreover, the DH 145 SH is fitted with modularly refined electrical equipment and pipes containing water according to European standard – all manually finished and quality-controlled at Trotec in Germany.
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
A permanent air dehumidification with the DH 145 SH offers the following advantages:
- Prevention of damages caused by mould as well as corrosion
- Prevention of condensation formation
- Protection against damages on building structure, production facilities and inventory caused by moisture
- Increased reliability of electrical equipment
- Dehumidification for process optimization in the industry
- Protection and preservation of valuable goods
- Reduction of unpleasant odours
- Reduced heating costs due to optimized humidity
- Noiseless and effective dry keeping
DH 145 SH - Special equipment features
Application examples from practical experience:
All Industrial dryers of the DH-S series in direct comparison:
To find the industrial dryer which exactly meets your requirements, please consult the concise overview of all Industrial dryers of the DH-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Reliable dryer with high dehumidification capacity
- Particularly economical solution for typical dry keeping in production facilities and storerooms
- With an integrated condensate pump as standard
- Pressure gauge indicators for a maintenance-friendly early detection of faults
- Modular refinement of electrical equipment and components containing water according to European standard – handmade in Germany
- Optimum value-for-money ratio
Make use of our best practice industrial services
You can count on our experts
In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.
Before the planned stationary units are installed, our service team first works with mobile versions of the drying units as part of a trial run. These can be put up without any difficulty or the need for structural changes.
During this validation phase we document all relevant climate parameters such as air temperature, relative humidity, dew point or flow rate for a final optimization of the requirement calculation.
Trotec is the only provider of this advantage:
Thanks to the unique option of non-binding trial operation you will invest solely in solutions which have verifiably proven their worth in everyday operation meeting your individual on-site requirements. The stationary units will not be ordered until you are fully satisfied with our concept. The only costs incurred consist of an inexpensive hiring flat rate for the time of test operation.
Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!
Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.
standard equipment
optionally available
not available
Shop
/en_GB/1125000224/DH-145-SH-Industrial-Dehumidifier-23916-1597923748.jpg)
DH 145 SH Industrial Dehumidifier
7,299.95 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.125.000.224 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 193 | |
| At 30 °C / 80 % RH [l/24h] | 485 | |
| Air flow rate | ||
| Level Max. [m³/h] | 4,300 | |
| Operating range | ||
| Min. temperature [°C] | 5 | |
| Max. temperature [°C] | 32 | |
| Min. humidity [% RH] | 30 | |
| Max. humidity [% RH] | 90 | |
| Electrical values | ||
| Mains connection | 400 V, 50 Hz | |
| Nominal current consumption [A] | 16.6 | |
| Power input [kW] | 9.8 | |
| Required current starting phase [A] | 17 | |
| Recommended fusing [A] | 32 | |
| Electric connection | ||
| Connection plug | CEE 32 A phase inverter connector | |
| Cable length [m] | 3 | |
| Compressor | ||
| refrigerant | R-407C | |
| Amount of refrigerant [g] | 3,200 | |
| GWP factor | 1,774 | |
| CO2 equivalent | 5.68 | |
| Pressure outlet side [MPa] | 0.8 | |
| Pressure suction side [MPa] | 2.5 | |
| Sound values | ||
| Distance 1 m [dB(A)] | 68.5 | |
| Distance 3 m [dB(A)] | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 460 | |
| Width (packaging excluded) [mm] | 1,195 | |
| Height (packaging excluded) [mm] | 1,730 | |
| Weight | ||
| (packaging excluded) [kg] | 235 | |
| Equipment, features and functions | ||
|---|---|---|
| Mobility | ||
| Forklift | ||
| Carry/transport handle(s) | ||
| Plastic wheels | ||
| Non-marking full-rubber wheels | ||
| Adjustable bar handle | ||
| Rubber-tyred metal wheels | ||
| Swivel casters with parking brakes | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Analogue hygrostat | ||
| Hygrostat-controlled | ||
| Program-controlled | ||
| Automatic defrost system | ||
| Hot gas | ||
| Electronic | ||
| Hygrostat | ||
| Internal | ||
| Condensate drain | ||
| Hose connection possible | ||
| Hose included in the scope of delivery | ||
| Condensate pump | ||
| Recommended hose size [mm] | 15 | |
| Condensate pump | ||
| Available | ||
| Pump height [m] | 5 | |
| Max. conveying capacity [l/h] | 250 | |
standard equipment
optionally available
not available