Submerged clear water pump TWP 4006 E
Pump with near-ground suction (max. 7,300 l/h) for wipe-dry results – with an adjustable residual water level
Water pumping in the house and garden made easy
With 400 watts of power, the submerged pump TWP 4006 E moves the masses. Being a flexible helper in the home, garden and business, the universally applicable submerged clear water pump with its high flow rate is suitable for recirculating and pumping only slightly contaminated clear water (with dirt particles sized up to 5 mm) out of swimming pools, wells, rain barrels, cisterns or rainwater tanks. Similarly, the submerged pressure pump TWP 4006 E with near-ground suction can be used to dry out basements and washrooms that have been flooded due to heavy rainfall, washing machine leaks or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of only 5 mm. When used as a drainage pump in a drainage shaft, the robust pump, which is protected against the ingress of water by IPX8 type of protection, ensures that the accumulated rainwater is pumped out in a controlled manner.
Submerged clear water pumps of the TWP series at a glance
One of the most important criteria when selecting a submerged clear water pump is the pump capacity. Therefore, before purchasing, check whether the flow rate and delivery head are suitable for your application. Even larger water volumes can be transported using the structurally identical model TWP 7506 E with a maximum flow rate of 13,000 litres/hour.
Continuous operation and manual operation with preselected switch-on/switch-off height
The watertight (encapsulation) and extremely robust plastic housing of the TWP 4006 E is designed for underwater use up to 7 metres. From a water level of only 55 mm, the submerged pump starts suction. Similarly, the submerged pump can be used in manual operation with an individually preset switch-on and switch-off height. A holder on the pump housing allows the float position to be easily locked in order to individually adapt the switching heights to the application. If the otherwise freely movable float switch is fixed, the TWP 4006 E will pump continuously.
Durable, safe, good
Homeowners and passionate gardeners appreciate the quality and features of the extremely durable submerged pumps of the TWP series. The motors, which are both powerful and maintenance-free, have an integrated thermal protection circuit to gently switch off the pump technology in the unlikely event of overheating. An integrated backflow preventer keeps the hose from running dry after shutdown and thus reduces the time to restart suction.
One for all: flexible hose, tube and plug-in system connections
With the TWP 4006 E you have complete freedom of connection. No matter whether you want to connect the pump to a garden hose, an existing piping or irrigation system – the TWP 4006 E offers almost unlimited compatibility. The submerged pump allows the connection of hoses, tubes and plug-in systems with different diameters, with and without threaded connections. The reduction required for this is already included in the scope of delivery with various connection sizes.
Flexible all-rounder: 360° elbow with Quick-Connect connection
The convenient elbow will turn your head. With it, hose, tube or plug-in systems can be attached to the pump quickly and easily with just one movement and flexibly positioned at any angle. Simply plug it in and remove it again at the push of a button when the work is done.
Connection options of the TWP 4006 E:
- Hose connection for an inner diameter of 25 mm or 38 mm
- Hose and pipe connection for internal threads G1"/DN25 or G1½"/DN40
For self-pumped water – everywhere
The carrying handle integrated in the pump housing simplifies the transport of the compact and only 4 kg light TWP 4006 E in the garden or at other locations. Additionally, it serves as a suspension for the nylon cord (10 m) included in the scope of delivery to lower the submerged pump into wells, cisterns or other basins.
Extensive accessory set – already included in the scope of delivery
Why pay extra for something when it is already included in Trotec's scope of delivery? The submerged clear water pump TWP 4006 E is supplied ready for connection including all necessary accessories:
- 1 x Submerged clear water pump TWP 4006 E
- 1 x Reducer for hoses with inner diameters of 25 mm or 38 mm as well as hose connections with G1"/DN25 internal thread
- 1 x Elbow for hose connections with G1½"/DN40 internal thread
- 1 x Quick connection for elbow
- 1 x Backflow stop (pre-installed)
- 1 x Stainless steel washer (pre-installed)
- 1 x Nylon cord (10 m)
- 1 x Manual
Unpack, plug in and get started!
With the submerged pump TWP 4006 E, you are ideally equipped for almost all irrigation and drainage tasks in the house and garden!
Special equipment features of the TWP 4006 E
The TWP 4006 E is extremely versatile
All submerged pumps in direct comparison:
To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Impressive 400 watts of power for pumping up to 7,300 litres per hour
- Maximum delivery head: 7.5 m
- Ideally suited for the recirculation of water and for pumping it off or out e.g. of swimming pools, rain barrels, wells or basements after a flood or heavy rainfall and during work in drainage shafts.
- For effortless pumping of clear water with suspended particles sized up to 5 mm
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Dry run protection during automatic operation
- Fixing option for the float switch for automatic operation
- Near-ground suction to a level of 5 mm resulting in a wipe-dry floor
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Incl. 360° elbow and hose adapter
- Easy hose connection thanks to Quick-Connect system
- Backflow preventer barring a return flow
- Large ergonomic carrying handle – suitable for fastening the suspension cord
All important features at a glance
Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most diverse clear water applications: Those are some of the quality features of Trotec's submerged clear water pumps. No matter the demands, owing to their high capacity these pumps are never out of their depth. HighPerformance in every respect – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Differences between our submerged clear water pumps TWP 4005 E and TWP 4006 E
|Submerged pump:||TWP 4005 E||TWP 4006 E|
|Particle size||5 mm||5 mm|
|Residual water level||3 mm||5 mm|
|Quick-Connect connection for elbow||—|
|Inner hose diameter||25 / 32 mm||25 / 38 mm|
|Threaded connectors||1" / 1½"||1" / 1½"|
|Backflow stop valve|
The universally applicable clear water submersible pump is suitable as a flexible helper in the house, in the garden and in business. The maximum delivery rate of 7,300 l/h speaks in favour of the TWP 4006 E, as does the extraordinary delivery height of 7.5 meters.
You save: 35 %
52.03 £ 33.62 £ incl. VAT Show net price (VAT not included)
|Mains connection||230 - 240 V/50 Hz|
|Power input [kW]||0.4|
|Connection plug||CEE 7/4|
|Cable length [m]||10|
|Max. conveying capacity [l/h]||7,300|
|Grit of pump [mm]||5|
|Max. delivery head [m]||7.5|
|Max. submersion depth [m]||7|
|Minimum operating depth [mm]||55|
|Max. water level after suction [mm]||5|
|Max. water temperature [°C]||35|
|Type of protection||IPX8|
|Functions and features|
|On/off switch (float switch)||Automatic|
|Switch-on point float switch [mm]||500|
|Switch-off point float switch [mm]||100|
|Thermal overload protection|
|Suitable for both permanent operation (>10h) or salt-water operation|
|Accessories scope of delivery|
|Hose connection (inner diameter)||25 / 38 mm|
|Threaded connection||1";1 ½"|
|Length (packaging excluded) [mm]||220|
|Width (packaging excluded) [mm]||160|
|Height (packaging excluded) [mm]||310|
|(packaging excluded) [kg]||4|