1. Products & Services
  2. Measuring devices
  3. Multifunction
  4. T3000
  5. SDI sensors
  6. Material moisture sensors

SDI sensors for non-destructive material moisture measurement

Ideal for combined measurements of multidimensional moisture distributions.

Multifunctionality at its best

The innovative concept of a universal base device T3000, which is supplemented with flexibly exchangeable sensors , frees users from the need to always carry a complete collection of individual measuring devices with them for their measuring jobs.

A simple sensor change transforms your T3000 into exactly the special measuring device that you currently need. No further settings are required on the device because the intelligent technology of the T3000 automatically recognizes the connected sensor.

Apart from measurements without a specific material pre-selection where dimensionless digit values are displayed to indicate moisture, these sensors additionally offer the possibility to select anhydrite or cement screed. When pre-selecting screed, the indicative measuring results are directly shown in mass and CM % on the display of the T3000. The integrated conversion of measured values is a practical tool, in particular for floor layers to quickly check the readiness for covering. With the graphic grid measurement function integrated in the T3000, near-surface or subsurface moisture distribution can be detected, visualised and assessed as easily as never before!
Ideal for combined measurements of multidimensional moisture distributions.

Alarm function

Moreover, it is possible to determine an individual alarm limit value for both material moisture sensors. Thanks to this function large areas can be measured fast and effectively without continuously watching the display: Once the selected limit value is exceeded, the SDI sensor alerts the user emitting an acoustic signal!

Ideal for combined measurements of multidimensional moisture distributions.

When carrying out material moisture measurements with the T3000, you can either choose measuring an unspecific material, or directly select anhydrite or cementitious screed and have the measurement results displayed indicatively in mass % and CM %
Material moisture measurement
Moisture distributions can be recorded in a grid measurement and graphically visualized directly in the measuring device. During grid measurement the yellow field indicates the current measuring spot and automatically moves on to the next grid upon confirmation of the measured value.
Grid measurement

All SDI sensors in direct comparison:

To find the SDI-Sensor which exactly meets your requirements, please consult the concise overview of all SDI sensors from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

 standard equipment

 optionally available

 not available

TS 610 SDI microwave humidity sensor

TS 610 SDI Material Moisture Sensor show in Trotec online shop
Technical data
General information
  Article number 3.510.220.270
Material moisture
  Min. measuring range | Material moisture 0.0 digit
  Max. measuring range | Material moisture 200.0 digit
  Resolution 0.1 digit
  Accuracy | Material moisture 0.1 digit
  Penetration depth [mm] 300
  Measuring principle Microwave
Interfaces / plug design
  Plug design SDI connector
  Borehole for banana jack
Dimensions of sensor element
  Length [mm] 45
  Diameter [mm] 32
Material of sensor element
  Composite
  Aluminium
  Stainless steel
  Polycarbonate
  Other
Material of handle
  Material Plastics
  Plastic/metal
  Metal
Ascertainable measured values and functions
Internal sensors
  Material moisture (microwave) [digits]
  Material moisture (dielectric) [digits]
  Material moisture (electric resistance) [digits]
Functions and features
  Non-destructive sub-surface moisture measurement to up to 30 cm
  Acoustic alarm thanks to integrated piezo signal transmitter
  Automatic calibration during start-up
  Measurement method independent from salinization
  Insulated
  Uninsulated
  Non-destructive surface moisture measurement to up to 4 cm

 standard equipment

 optionally available

 not available

TS 660 SDI material moisture sensor

TS 660 SDI Material Moisture Sensor show in Trotec online shop
Technical data
General information
  Article number 3.510.220.275
Material moisture
  Min. measuring range | Material moisture 0.0 digit
  Max. measuring range | Material moisture 200.0 digit
  Resolution 0.1 digit
  Accuracy | Material moisture 0.1 digit
  Penetration depth [mm] 40
  Measuring principle Dielectric
Interfaces / plug design
  Plug design SDI connector
  Borehole for banana jack
Dimensions of sensor element
  Length [mm] 55
  Diameter [mm] 20
Material of sensor element
  Aluminium
  Stainless steel
  Composite
  Polycarbonate
  Other
Material of handle
  Material Plastics
  Plastic/metal
  Metal
Dimensions
  Length (packaging excluded) [mm]
  Width (packaging excluded) [mm]
  Height (packaging excluded) [mm]
Ascertainable measured values and functions
Internal sensors
  Material moisture (dielectric) [digits]
  Material moisture (electric resistance) [digits]
  Material moisture (microwave) [digits]
Functions and features
  Non-destructive surface moisture measurement to up to 4 cm
  Acoustic alarm thanks to integrated piezo signal transmitter
  Automatic calibration during start-up
  Insulated
  Uninsulated
  Measurement method independent from salinization
  Non-destructive sub-surface moisture measurement to up to 30 cm

 standard equipment

 optionally available

 not available