Ceramic fan heater TDS 10 C
Small, but impressive – and ardently sought-after by tough calculators
So much hot temper in such a compact, robust and easily portable construction? It is hard to believe, but made possible by Trotec, as one can immediately recognize from the brand logo imprinted on the outside of this electric heater painted in signal red.
Its excellent workmanship, the transport-friendly dimensions and a sophisticated heating technology make the TDS 10 C an indispensable heating device for assembly work, workshops, market stalls, construction trailers and other cold rooms.
For unlike conventional electric heating devices, the TDS 10 C uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Thanks to the smoothly running fan and the large heater battery surface, you can benefit from a pleasantly homogeneous, draught-free hot air current – which is, moreover, usually produced in a more silent way. As an additional plus in safety, the integrated ceramic heating element also increases the fan heater’s stability.
With its two heating levels that can be set separately, the TDS 10 C can be variably switched to 1 kW or 2 kW heating operation and, in combination with its powerful axial fan, provides pleasant warmth in cold rooms.
The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 10 C. If required, the fan can also be used in sole fan operation without heating function.
Faster air heating – more uniform room temperature
Trotec’s fan heaters with PTC ceramic heating elements (A) not only differ from conventional heating coil technology (B) in terms of their shorter heat-up times. There are also process-related differences in the response behaviour of the heating elements.
Although both devices maintain the preselected target temperature (orange) by means of thermostat control using a two-position controller, the respective temperature adaptation takes place significantly more slowly and with greater deviations from the desired target temperature in case of devices with heating coils. The reason for this is the different conductivity behaviour of the heating elements:
if current flows through the heating coils, the coils will always have the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, making the coil cool down, and then re-activated by the thermostat so that the coil heats up again completely before it is switched off again when the set target temperature is reached.
This “on/off process” causes significantly greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation.
For this reason, ceramic fan heaters are able to create more even room temperatures for temperature-sensitive manufacturing processes as well as a pleasant working climate.
Reliable heating solutions with an optimum value-for-money ratio – suited for manifold fields of application:
- Construction trailers
- Greenhouses
- Boathouses
- Garages
- Market stalls
- Workshops and halls
- Catering trade
Special features:
- Fastening preparation for wall and ceiling mounting
- Controllers recessed for protection
Practical tip:
Instead of positioning them on the floor, you can also flexibly mount the ceramic fan heaters of the TDS-C series to a wall or ceiling. For as they leave the factory, these electric heaters are already fitted with two fastening threads mounted to the sides that serve to accommodate the optionally available wall and ceiling holders.
This way you can use the heating devices without creating a trip hazard or obstructing a passage, for instance when heating construction trailers, market stalls, greenhouses, small halls, garages, workshops or boathouses.
All Trotec ceramic fan heaters of the TDS-C series by direct comparison:
To find the TDS-C ceramic fan heater which exactly meets your requirements, please consult the concise overview of all devices from Trotec’s TDS-C series, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Development, design, production: 100 % Trotec
- Durable ceramic PTC heater battery
- Multi-stage temperature control with two heating levels plus separate cold air level
- Integrated thermostat for a constant warm air flow
- Overheating protection
- Fan motor with thermal protection
- Non-condensing warmth without oxygen consumption – ideal for heating interior spaces
- Robust metal housing in signal red
- Stable, robust and silent
- Easy transport and operation
Practical knowledge guidebook – heating know-how for professional users
Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.
Continue to the practical knowledge guidebook for professional heating
standard equipment
optionally available
not available
Buy
TDS 10 C Ceramic Fan Heater
You save: 38 %
54.95 £
33.95 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.410.000.090 | |
Heating capacity | ||
Level 1 [kW] | 0 | |
Level 2 [kW] | 1 | |
Level 3 [kW] | 2 | |
Air flow rate | ||
Level Max. | 140 | |
Temperature increase | ||
in [°C] | 151 | |
Operating range | ||
Min. temperature [°C] | -15 | |
Max. temperature [°C] | 25 | |
Fans | ||
axial | ||
Electrical values | ||
Mains connection | 220 - 240 V, 50 Hz | |
Nominal current consumption [A] | 8.7 | |
Recommended fusing [A] | 10 | |
Power input [kW] | 2 | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.3 | |
Functions and features | ||
Fan function | ||
Temperature control with two heating levels | ||
Auto restart function | ||
Sound values | ||
Distance 1 m [dB(A)] | 52 | |
Safety feature | ||
Overheating protection [°C] | 85 | |
IP type of protection | IP20 | |
Protection class | I | |
Hose connection | ||
Hose connection | ||
Dimensions | ||
Length (packaging excluded) [mm] | 165 | |
Width (packaging excluded) [mm] | 165 | |
Height (packaging excluded) [mm] | 225 | |
Weight | ||
(packaging excluded) [kg] | 2 |
Equipment, features and functions | ||
---|---|---|
Operation | ||
Thermostat | ||
Mobility | ||
Carry/transport handle(s) | ||
Ceiling holder | ||
Wall holder | ||
Housing design | ||
Metal |
standard equipment
optionally available
not available