BH30 Socket Hygrostat
Do you have any questions?
Advice for private customers
Tel: +49 2452 962-450
E-mail: online-uk@trotec.com
Mon. – Thu.: 8:00 – 17:30
Fri.: 8:00 – 17:00 (CET)
- 30 days right of return
- Purchase on account and instalments
- Personalised advice
Savings Packages
Your advantages
Shopping on the Internet should also be an experience!
Top price performance
Top products at fair prices.
Quality
Without compromise. Experience the difference.
Worldwide dispatch
Delivered safely and quickly to over 35 countries for you.
Product Description for BH30 Socket Hygrostat
The socket hygrostat is simply installed between humidifiers, dehumidifiers or air-conditioners and power outlets. Now, only the desired mode and the individual humidity value of the room air (between 20% and 90% RH) have to be set.
The BH30 determines the actual humidity in the air by means of electronic humidity measurement and adjusts it with individually adjustable humidity target values.
When over or under the determined value, the hygrostat automatically switches on or off the connected device, with which the humidity is regulated: e.g. An air humidifier with too dry room air is switched on and a dehumidifier at too low atmospheric humidity is switched off. Thus, no attention has to be paid to the plugged-in device.
Therefore, the BH30 is ideally suited to efficiently control devices without an integrated hygrostat such as Trotec Aircoolers or dehumidifiers without built-in hygrostat.
Benefits in practice:
- Easy operation and programming
- Constant humidity control of humidifiers and dehumidifiers to a set value
- Regulation of humidity between 20% and 90% RH
- Avoid unnecessary running times by switching the devices on and off automatically
- Operating status displayed by the red or green indicator light
- Easily readable display
- Reset-function of selected settings
- Back-up battery for storing the selected settings
Technical details:
- Control range min .: 20% RH
- Control range max .: 90% RH
- Accuracy: ± 5% RH
- Measurement interval: 10s
- Switching capacity ohmic load: 16 A / 3.680 VA
- Switching capacity inductive load: 9 A / 2.070 VA
- Connector: CEE 7/3 (Schuko socket type F)
- Monochrome LCD display
- Push buttons for device control
- Plastic housing
- Insulation: Protection class I
- Power supply: Battery type 1x 3V, CR2032
- Power supply: 230 V / 50 Hz; Connection plug: CEE 7/7 (plug type F + E)
- Ambient conditions Temperature: 5 ° C to 35 ° C
- Ambient conditions rel. Humidity: max. 95% RH.
- Storage conditions Temperature: -10 ° C to + 50 ° C
- Storage conditions Humidity: max. 80% RH.
"Note: Connected consumers are disconnected from the power supply by the device when it is switched OFF and must have an automatic restart" This device is only available as 2-pin
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 6.100.004.205 | |
Control range | ||
Min. regulation range [% RH] | 20 | |
Max. regulation range [% RH] | 90 | |
Control range | 20 % RH up to 90 % RH | |
Accuracy ± | relative humidity [% RH] | 5 | |
Measuring interval [s] | 10 | |
Switching capacity | ||
Resistive load | 16 A / 3.680 VA | |
Inductive load | 9 A / 2.070 VA | |
CEE 7/3 (Schuko socket type F) | ||
Display | ||
LCD | ||
Monochrome | ||
Device control | ||
Push buttons | ||
Housing design | ||
Plastics | ||
Insulation | ||
Protection class I | ||
IP30 | ||
Power supply | ||
Battery type | 1x 3 V, CR2032 | |
Mains connection | ||
Mains connection | 230 V, 50 Hz | |
Connection plug | CEE 7/7 (plug type F + E) | |
Ambient conditions | ||
Operation - min. temperature [°C] | 5 | |
Operation - max. temperature [°C] | 35 | |
Operation – max. relative humidity (non-condensing) [%] | 95 | |
Storage - min. temperature [°C] | -10 | |
Storage - max. temperature [°C] | 50 | |
Storage - max. relative humidity (non-condensing) [%] | 80 | |
Dimensions | ||
Length (packaging excluded) [mm] | 126 | |
Width (packaging excluded) [mm] | 68 | |
Height (packaging excluded) [mm] | 76 |
Standard scope of delivery | ||
---|---|---|
Standard scope of delivery | ||
Device | ||
Getting started guide |
Ascertainable measured values and functions | ||
---|---|---|
Internal sensors | ||
Relative humidity [%] | ||
Air temperature [°C] | ||
Air temperature [°F] | ||
Functions and features | ||
Humidity regulation for humidification and dehumidification mode | ||
Display of current room humidity | ||
Manual switching function | ||
Fail-safe |
standard equipment
optionally available
not available
Why you can trust Trotec
As one of the leading international manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, dehumidification, heating, air conditioning and ventilation. For our high-performance devices, we rely 100 % on research, development, design and production in Germany. For the highest quality standards, sophisticated system solutions and fresh ideas.
People. Technology. Product.
What we do, we do with passion. And with real conviction. We are always there when it comes to climate. Find out more in our video.