Socket Thermostat BN30
Availability: Immediately available
BN30 socket thermostat
Frequently bought together
Total
The thermostat BN30 allows in half-degree steps the
temperature regulation of heating and air-conditioning units between 5 °C to
30 °C. For this purpose, the socket thermostat is simply placed between the heating or
and the socket outlet and the desired temperature is set.
set. By means of its integrated sensors, the device measures the actual
value of the room temperature and regulates the heating or air-conditioning unit to the
according to the desired setpoint.
The simple operation and programming of the device allow a wide range of a wide range of possible applications - the BN30 is particularly suitable for mobile BN30 is particularly suitable for mobile heating systems.
The large overview display conveniently shows the current room temperature reached at any given time. temperature reached at any given time, and the heating or air-conditioning unit can also be switched off heating or air-conditioning unit is also possible via the thermostat.
In addition, the BN30 is protected against power failure by an integrated EEPROM.
power failure-proof, so that in the event of a power failure, the storage of the
the selected settings are retained in the event of a power failure.
Practical tip: Ideally, the BN30 should be plugged into interior walls.
Examples of use:
- Switching auxiliary heaters (e.g. infrared heating panels of the Trotec TIH series)
- Ventilation control in greenhouses
- Temperature control in storage rooms
- Switching off anti-icing devices
Advantages for the practice:
- Easy operation and programming
- Fast adjustment of program temperature possible
- Suitable for heating as well as cooling control
- Operating range from -10 °C to +70 °C
- Regulation between 5 °C to 30 °C
- Temperature regulation in 0.5 °C steps
- Permanent switch-off function of the consumer (OFF)
- Overview display
- The device is power failure-proof via an integrated EEPROM
"Note: Connected consumers are de-energized by the device when OFF and must have an automatic restart."
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 6.100.007.009 | |
| Control range | ||
| Control range | 5 °C up to 30 °C /41 °F up to 86 °F | |
| Accuracy | ±0.5 °C | |
| Measuring interval [s] | 10 | |
| Switching capacity | ||
| Resistive load | 16 A / 3.680 VA | |
| Inductive load | 2 A / 460 VA | |
| CEE 7/3 (Schuko socket type F) | ||
| Display | ||
| LCD | ||
| Monochrome | ||
| Device control | ||
| Push buttons | ||
| Housing design | ||
| Plastics | ||
| Insulation | ||
| Protection class I | ||
| CAT II (2,500 V) | ||
| IP20 | ||
| Mains connection | ||
| Mains connection | 230 V, 50 Hz | |
| Connection plug | CEE 7/7 (plug type F + E) | |
| Ambient conditions | ||
| Operation - min. temperature [°C] | -10 | |
| Operation - max. temperature [°C] | 70 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 140 | |
| Width (packaging excluded) [mm] | 60 | |
| Height (packaging excluded) [mm] | 75 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Operating manual | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Internal sensors | ||
| Air temperature [°C] | ||
| Air temperature [°F] | ||
| Functions and features | ||
| Temperature control for heating or cooling operation | ||
| Indication of the current room temperature | ||
| Manual switching function | ||
| Fail-safe | ||
standard equipment
optionally available
not available
