Oil heater fan IDE 30
Availability: Immediately available
Payment in installments
PayPal Buy Now Pay Later is not available to pay for subscriptions.
Oil heater fan IDE 30
The IDE 30 oil heater fan with a rated heat output of 30 kW (25,800 kcal) and an air flow rate of 780 m³/h. The consumption is a maximum of 2.4 liters of oil per hour.
If you are looking for a cost-effective and reliable oil-fired heating solution with clean and dry hot air for flexible heating of workshops, storage and production areas, construction sites or halls, then the compact IDE 30 oil-fired fan heater is our best recommendation.
Due to its durable housing made of double-painted material, this indirectly fired oil heater fan is ideally prepared for heating applications in outdoor areas and can also be used for heating closed rooms when using the optionally available flue gas exhaust.
The IDE 30 can be fired variably with diesel or heating oil as fuel, the constant supply of which is guaranteed by a high-quality Danfoss injection pump. The external fuel filter allows easy access and the current fuel quantity can be conveniently read on the level indicator integrated in the tank.
For automatic temperature control, in addition to the permanently installed thermostat with digital dual display for setpoint and actual value, an external thermostat is also available as an optional accessory, which can also measure the temperature at a location to be heated that is up to 25 meters away from the IDE 30 oil heater fan.
IDE indirect oil heaters - maximum heating power, clean heat
The IDE series indirect oil heaters are ideally suited for rooms where only limited ventilation is possible, but which are still ventilation is possible, but which are still to be used by people and animals. animals. They are also a good choice for accelerating the drying of and in rooms where there is a risk of fire due to the presence of flammable fire hazard due to the presence of flammable materials.
In indirect heaters, the air to be heated is completely separated from the combustion chamber.
The air is heated by passing over the enlarged surface of the combustion chamber, the heat exchanger. The blower blowing out the warm air also provides the required combustion air, but the combustion combustion air, but the combustion products are exhausted to the outside through a chimney to the outside.
Thus, to obtain clean and at the same time dry heat, it is recommended to use indirect heaters.
In contrast to direct heaters, no combustion products or water vapor are released into the air. or water vapor into the room air, provided that the optionally available flue gas flue gas exhaust system is used.
Here are some practical advantages at a glance:
- Particularly economical solution for standard oil-fired heating systems
- Integrated fuel tank with level indicator
- Electronic flame safeguard
- Overheating protection
- Stainless steel combustion chamber
- Integrated thermostat
- Connection for external thermostat
- Mobile base for easy relocation
|Method of heating indirect|
|Method of heating direct|
|Air flow rate|
|Level Max. [m³/h]||780|
|Nominal heat output|
|Level Max. [kW]||30|
|Level Max. [kcal]||25,800|
|Level Max. [°C]||95|
|Mains connection||230 V, 50 Hz|
|Current consumption [A]||1.5|
|Power input [kW]||0.25|
|Heating capacity [kW]||30|
|Connection plug||CEE 7/7|
|Cable length [m]||1.2|
|Connection for external thermostat|
|Fuel feed||Danfoss pump|
|Level Max. [l/h]||2.8|
|Diameter | Hose connection [mm]||300|
|Diameter | Chimney connection [mm]||120|
|Distance 1 m [dB(A)]||78|
|EL fuel oil|
|Low-sulphur EL fuel oil|
|Length (packaging excluded) [mm]||1,107|
|Width (packaging excluded) [mm]||498|
|Height (packaging excluded) [mm]||766|
|(packaging excluded) [kg]||34.5|
|Equipment, features and functions|
TRT-BA-IDE20-30-50-60-80-TC-010-CS.pdf (3.26 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-DE.pdf (3.27 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-EN.pdf (3.27 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-ES.pdf (3.26 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-FR.pdf (3.28 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-HR.pdf (3.26 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-IT.pdf (3.27 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-NL.pdf (3.26 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-PL.pdf (3.27 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-SK.pdf (3.26 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-SL.pdf (3.27 MB)
TRT-BA-IDE20-30-50-60-80-TC-010-TR.pdf (3.27 MB)