Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

BG20 carbon monoxide measuring device

For quick checking of CO concentrations

With the BG20 of the MultiMeasure Basic series, the exact CO content in the ambient air can be detected and so one can e.g. ensure the adherence to applicable limit values at the workplace.

The hand-held measuring device is ready for operation a few seconds after switch-on and quickly and reliably captures CO concentrations ranging from 0 to 1,000 ppm. The values are determined accurately to ± 10 ppm and indicated clearly legible on the large, backlit display. If required, ten measured values can further be stored directly in the BG20.

Thanks to the integrated alarm function, it is also very simple and convenient to quickly check critical values: In case of values above 35 ppm, the measuring device automatically alerts the user by means of an acoustic signal, whose interval shortens with increasing values and from 200 ppm is emitted as a constant warning signal.

Thanks to the automatic switch-off after 15 minutes of inactivity, unintentionally flat batteries have become a thing of the past.

The clearly structured function keys allow convenient single-handed operation.

A few practical benefits:

  • Quick and reliable measurement of CO concentrations in the ambient air
  • Measuring range from 0 ppm to 1,000 ppm
  • Optimum price-performance-ratio
  • Maximum value and hold function
  • Adjustable alarm limit values
  • Easy, one-hand operation
  • Illuminable display
  • Storage space for ten measured values
  • Automatic switch-off

Facts worth knowing about carbon monoxide:

Carbon monoxide (CO) is an invisible, odourless and tasteless gas forming in the process of combustion of fossil fuels. Without a sufficient oxygen feed, the CO concentration in the ambient air rises especially fast and then even small amounts can be enough to cause damages to health:

Already at a CO share of only 1.28 % in the room air, death by suffocation occurs after only one to two minutes.

Therefore, in Germany we have severe limit values required by law for the CO exposure of employees. The permissible limit value here is 30 ppm (corresponds to 35 mg per m³) in the ambient air.

Nevertheless, the air pollution in production facilities, craft enterprises or workshops is often wrongly assessed and the risk of CO poisoning ignored, although even the short-term operation of diesel-powered and petrol-driven machines in closed rooms such as underground car parks, assembly shops or construction sites can lead to symptoms of intoxication.

Hence, it is important to constantly check the current CO concentration in indoor spaces, factory halls and building sites using appropriate measuring devices. The inspection of the air quality by use of CO measuring devices is also absolutely recommendable for the catering trade, e.g. when using gas radiant heaters, or for indoor go-kart operators.

Shop

BG20 Carbon Monoxide Meter show in Trotec online shop

BG20 Carbon Monoxide Meter

This sensitive measuring device is ready to use straight after it has been powered up and can reliably determine the CO content in the surrounding air. You can also save the last ten measurements and set alarm thresholds to warn you when certain levels are exceeded.

You save: 53.61 £

178.64 £ 125.03 £ incl. VAT
Show net price (VAT not included)

buy

Details

Technical data
General information
  Article number 3.510.205.060
Carbon monoxide
  Measuring range 0-1,000 ppm
  Accuracy ±5 % or ±10 ppm
  Resolution 1 ppm
  Sensor type Stabilised electrochemical gas-specific (CO)
  Warm-up time < 20 s
Combustible gases
  Accuracy
  Standard calibration
  Alarm threshold
  Max. alarm level
  Warm-up time
Power supply
  Internal (battery)
Surrounding conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 50
  Operation – min. relative humidity [%] 0
  Operation – max. relative humidity (non-condensing) [%] 99
Memory organisation
  Internal flash memory For 10 measured values
Display
  LCD
  Monochrome
Housing design
  Plastic
Interfaces
  3,5 headphone jack
  USB
Dimensions
  Length (packaging excluded) [mm] 160
  Width (packaging excluded) [mm] 40
  Height (packaging excluded) [mm] 56
Weight
  (packaging excluded) [kg] 0.18
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Battery(-ies)
  Bag/Holster
  Operating manual
Ascertainable measured values and functions
Internal sensors
  Carbon monoxide [ppm]
  Combustible gases [indicative via acoustic signal depending on the concentration]
Functions and features
  Maximum value display
  Hold function
  Automatic switch-off
  Backlit display
  Acoustic alarm function
  Visual alarm function
  Memory for ten measured values
  Gooseneck probe

 standard equipment

 optionally available

 not available

Accessories

Alternative products

Downloads

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social