Turbo fan TFV 30 S
The TFV 30 S turbofan provides a wide and flat air flow, especially for the drying of floors or walls
Due to its especially formed air exhaust duct, this turbo fan produces a wide air current near the ground above wet flooring or screeds. The room air is thus optimally distributed which perceptibly reduces drying time.
In the case of carpet cleaning, the accelerated drying besides time saving also brings along the advantage, that natural fibre fabrics distinctly less often lose their shape and corrugation can be avoided.
But also when assisting in wall and floor drying after a water damage, or else speeding up the drying of screed and entire buildings, the TFV 30 S can provide valuable services.
The stackable TFV 30 S comes with three variable power stages, so the air volume can always be optimally adjusted to the different requirements of the object. Its housing consists of indestructible polyethylene and is therefore equally light and robust.
Practical: Service socket and optional triple hose distributor
A helpful equipment feature of the TFV 30 S is the integrated service socket. Even when no cable drum or further wall sockets are available, one can e.g. connect a second turbo fan or an additional dehumidifier for drying support directly to the TFV 30 S.
Furthermore, a triple hose connector is optionally available with which the air flow can be focused on up to three different spots in only one work step. If less than three hoses are to be connected the supplied sealing plugs reliably seal the not required hose connections.