Insulation drying can be so easy: Qube+

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

It’s quite simple. Plus more. Qube+

For insulation drying, a comparable set of stacked MultiQubes can simply be replaced with one device – the Qube+. It achieves up to 20 % more area output while being 50 % lighter and 50 % smaller than the tower.

Therefore, the transport from the service vehicle to the damage site can be effected 100 % quicker. A multi-device installation with complex hose connections can be omitted without replacement. Just set it up, plug it in, switch it on – all done!

No more equipment technology is needed, the Qube+ comes ready for connection with all integrated parts: A powerful VX 5 turbine insulation dryer, a water separator, a 4-stage filter system and an efficient silencer – ultra-compact, united in a robust, stackable aluminium construction, offering clearly more advantages and at the same time causing considerably less costs than multi-device solutions.

Your employees will be grateful as well: 50 % less to carry, lift, haul, stack – 100 % fewer hose connections, less wiring and lashing down – 20 % less to be assembled!

Globally unique integral solution – Trotec exclusive!

Globally unique integral solution:

  • VX 5 turbine
  • Water separator WA 4i
  • HEPA filter module
  • Silencer NR 19

Everything is installed completely ready for connection – light, compact and powerful – in the world’s only integral solution on the market! The Qube+ sets the standard for the most energy-efficient insulation dryer in the entire industry being the superior solution both economically and energetically!

A few practical benefits:

  • Professional quality “Made in Germany” –
    originally produced by Trotec
  • Replaces 4 devices with one: water separator, HEPA filter, silencer and side channel compressor with a capacity of up to 3 kW
  • Up to 75 % smaller than constructions from competitors
  • Carrying, lifting, stacking 50 % less
  • This system allows a quick and easy installation like no other
  • Fully automatically always the most efficient drying performance thanks to HiDry automatism
  • Coloured power control indication via Optiflow NT multi-function display
  • Additional cost-efficient HEPA filtration on demand
  • Total weight only 27 kg

When launched, the Qube already offers the following advantages:

  • Up to 20 % more area output than a comparable MultiQube system
  • Adaptronic power control for flexible low-pressure surface drying operations ranging from 10 m² to 85 m²
  • The quickest possible drying owing to the globally unique HiDry automatism for all performance levels
  • One Qube takes the place of 4 devices:
    water separator, HEPA filter, silencer and any side channel compressor with a performance class from 0.4 kW to 3 kW
  • Flexible filter system with on-demand HEPA filter usage to reduce consumption costs
  • Up to 75 % smaller than constructions from rivals
  • Carrying, lifting, stacking 50 % less
  • Installation 100 % quicker and easier without time-consuming intermediate tube connections
  • DA 4 interface for real-time remote monitoring of the system status and drying progress
  • Optiflow NT multi-function display with plain text status indication and colour illumination for power control
  • Digital counter for operating hours and energy consumption
  • Integrated thermal protection to prevent damages to the drying devices, stock and building structure
  • Night operation – whisper mode
  • Non-wearing touchscreen control panel

And now, the Qube+ comes with even more plus factors to offer:

Optimized noise emission – even more silent (8–10 dB(A)), subjectively corresponds to halving of the volume
Even more silent
Even smarter control software – newly developed for a pressure-optimized volumetric flow with simultaneously higher energy efficiency
Even smarter control software
Additional ECO level (stage 1) – yet more flexible drying of small surfaces also
Additional ECO level
Sensor-supported thermal protection with regeneration sequence and automatic switch-off
Sensor-supported thermal protection function
MID-compliant counter
MID-compliant counter
2 x 2 quick release fasteners for an improved positive fit and more transport safety
Improved mobility
TTKwic mode for condensate discharge from connected dehumidifiers even when switched off
TTKwic mode
Optimized handling due to height-adjustable telescopic push handle
Telescopic push handle
Contact spring plate for an improved positive-fit connection and quicker access
Improved positive-fit connection
Key lock function – improved protection against maloperation
Key lock function
Even more resistant control panel design with screen protection
Even more resistant control panel design
Yet easier to disassemble for maintenance thanks to an improved wireless connection
Easier disassembly of the turbo motor unit

Up to 75 % smaller than constructions from competitors

50 % smaller than a comparable MultiQube installation and up to 75 % smaller than constructions from competitors

Minor cause, major effect: Thanks to its ultra-compact design the application of the Qube+ allows up to 100 % more working productivity and up to 300 % more warehouse productivity.

With the Qube+ all “time-wasters” can be eliminated in one sweep – this way you benefit from extreme increases in productivity in the everyday restoration work:

Making arrangements for less devices and moving them in each event of damage, reduced stock requirements, more equipment per tour in the service vehicle, quicker loading and unloading, quicker transport from the vehicle to the site of damage, quicker installation, quicker disassembly, a reduced need for cleaning.

The bottom line is your working and warehouse productivity can be increased may times over by using the Qube+!


Ultra-compact – plus great equipment: Qube+

Besides a non-wearing touchscreen control panel with additional screen protection the Qube+ comes equipped with the innovative Optiflow NT multi-function display, which displays not only all the settings but more importantly also a colour-coded rendering of the drying installation’s efficiency. The standard equipment of each Qube+ also includes a DA 4 interface and an Efidry humidity sensor connection.
Non-wearing touchscreen control panel

Touchscreen control panel

The Qube+ affords convenient handling by touch. No controller, no wear. A soft touch on the corresponding symbol is all it takes to configure your Qube+.

In addition to the Plus/Minus buttons for a quick selection of the respective performance level the control panel also accommodates functions for an extra whisper mode as well as for the combined display of power consumption and operating hours.

Optiflow NT multi-function display

Not only the current operating status and volumetric flow can be read from the Optiflow NT multi-function display of the Qube+ as plain text – also in the dark or from a distance – the colour of the display illumination also automatically indicates how effectively the drying air can flow through the insulation layer of your installation.

Green confirms optimum volumetric flow, orange indicates thresholds and with a red LED the air flow rate is insufficient for the area, so that installation optimization is needed for quicker drying.

Night operation – whisper mode

In whisper mode the Qube+ is particularly silent, yet efficient. For sound level reduction is not simply effected by reducing the power, but by regulating it with noise-optimized emphasis to the optimum volumetric flow of power stage 2.

Once activated, the Qube+ operates in whisper mode for ten hours and then automatically switches back to the previously used power stage. Enormously handy for customers requiring maximally silenced background noise for a short time.

Sensor-supported thermal protection function

An integrated sensor system monitors the internal air temperature of the Qube+ and automatically switches from the current level to level 1 before destructive climate conditions above 45 °C are reached inside the device, which lead to material stress and thus shorten the lifetime of the Qube+.

The temperature is continued to be monitored and the Qube+ will automatically switch back to normal operation if the temperatures drop again. However, if the temperature level remains critical over too long a period, the device is switched off completely for reasons of safety.

This protection not only significantly extends the lifetime of your insulation dryers and dehumidifiers, it also prevents thermal damages to materials located in the room and the building structure.

TTKwic mode

TTKwic mode

The Qube+ has all the performance characteristics of the water separator WA 4i including two TTKwic quick couplings for the simple drainage connection of dehumidifiers.

To ensure that their condensate is pumped off reliably via the TTKwic quick couplings even when the Qube+ is switched off, you can switch the device into TTKwic mode via the control panel. The motor will be off, but the pump will keep running.

The control panel has an even more hard-wearing design. Using the key lock function, you can simply eliminate any risk of maloperation.
Hard-wearing control panel design
Optimum volumetric flow, green display illumination.
Colour-coded indication of the installation’s efficiency
At thresholds the display is illuminated in orange.
Colour-coded indication of the installation’s efficiency
Red light indicates an insufficient air flow rate – the installation needs to be optimized.
Colour-coded indication of the installation’s efficiency
The energy consumption is metered by means of an MID-compliant counter, which is separately integrated in the Qube+ and supplies the display with the recorded data. At the same time, the operating hours are also indicated.
Digital counter for operating hours and energy consumption
In night operation (whisper mode) the Qube+ is particularly silent, yet efficient.
Night operation – whisper mode
If the sensor-supported thermal protection function switches on, a corresponding status message will simultaneously be displayed.
Sensor-supported thermal protection function
Maximum drying efficiency in the shortest possible time – this is guaranteed when using the Qube+ in combination with the drying control unit DA 4 Qube.
Maximum drying efficiency with Qube+ and DA 4 Qube

Turbo motor with adaptronic power control

The four-step variable turbo motor of the Qube+ achieves up to 20,000 rpm and guarantees maximum efficiency at any power level, because due to the integrated HiDry automatism the current volumetric flow is recorded continually in m³/h and the air flow rate of the Qube+ is automatically adjusted to the optimum value.

At the touch of a button the Qube+ switches either into a higher performance class or, if required, into the additional whisper mode.

HiDry automatism

Fully automatically always the most efficient drying performance

A motor power exceeding the demand does not speed up the drying process, instead it only increases wear and power consumption. The decisive performance variable for a quicker drying process is not motor power, but an unvaryingly high air passage through the insulation layer areas to be dried.

Therefore, the Qube+ comes equipped with the innovative HiDry automatic control system, which adjusts the performance not based on resistance, but on volumetric flow, and so automatically ensures the most efficient performance in each stage for every drying installation.

Much like a cruise control in a car, the sensor-supported HiDry automatism dynamically and continuously adjusts the volumetric flow rate of the Qube+ to the preset optimum value of the respective power stage.

Whilst at the beginning of the drying process more motor power is required to maintain the volumetric flow at a relatively high resistance, the need for power falls continuously as the drying proceeds.

Over the entire drying period the HiDry automatism ensures that the turbo motor of the Qube+ does not generate more power than needed to maintain the optimum volumetric flow.

The result: The quickest possible drying at minimum energy input!

The Qube+ impresses with high economic efficiency

Performance-optimized energy consumption

Unlike conventional side channel compressor turbines, the Qube+ turbo motor’s output and power consumption are always linear and directly interrelated:

When the performance level is cut back or the counter-pressure decreases, the power consumption is equally reduced. Plus the performance control is not effected based on resistance, but geared to the required volumetric flow.

Due to this technique, the Qube+, compared to side channel compressors, works more or less at the energy-saving eco tariff, especially during the final drying phase.

Always just as much power as you need:

  • Power stage 1:
    Ideal for the economical drying of smaller surfaces. At this level the Qube+ offers the same output as a 0.4 kW side channel compressor, but uses 70 % less power!
  • Power stage 2:
    Corresponds to the output of a 0.8 kW side channel compressor.
  • Power stage 3:
    The Qube+ is approx. 10 % more powerful than a side channel compressor with 1.1 to 1.3 kW.
  • Power stage 4:
    Corresponds to 160 % of the output of a 1.1 kW to 1.3 kW side channel compressor and to 95 % of the performance of a 3 kW side channel compressor.

Telescopic push handle
Stackable construction

Stackable construction with telescopic push handle

The height-adjustable telescopic push handle can be extended and retracted at the push of a button. This serves to individually adjust the handle height to the respective user as well as for space-saving storage.

Motor cover with carrying handle and cable holder

The motor cover is further equipped with carrying handle and convenient cable holder. Moreover, two recesses for stacking ensure the secure stand of the stacked devices during transport or storage.

Service-friendly design

Service socket and hose connection for process air discharge

The Qube+ comes equipped with an integrated service socket to which a condenser dryer or drying control unit can be connected quickly and easily.

Also, the Qube+ is provided with a 50 mm threaded connection for process air discharge. With it the critical heating of the room temperature can be effectively reduced to preserve the value of your drying devices.


Service-friendly design
Flexible filter system

Flexible filter system

For all applications requiring HEPA filtration the carrier case of the G4 filter sleeve can quickly and easily be replaced by the HEPA filter module with combined F8 prefilter sleeve.

Be it for filter changes or cleaning, the maintenance-friendly design of the Qube+ permits quick and safe working. Turbo motor, power connection and all major electrical components are accommodated entirely in the motor cover, which – owing to the quick-lock technology – can be detached in a wink.

Once the cover is removed, the bottom section of the Qube+ is completely de-energized since there are no cable connections from the motor cover. Hence, you can immediately start cleaning without further safety measures.

DA 4 interface

Merged to perfection: Qube+ and DA 4 Qube

The Qube+ is as standard equipped with an interface for data exchange with our drying control unit DA 4 Qube.

The combination of both units enables the cross-linkage of all device data incl. real-time remote monitoring of system status and drying progress.


The Qube+ is supplied ready for use with accessories and supplies

Accessories and supplies contained in the scope of delivery of the Qube+:

  • Water separator bottom filter mat, 1 piece
    Art. no. 7.160.000.206
  • G4 filter sleeve, 1 piece
    Art. no. 7.160.000.214
  • F7 Z-line filter for filtering the sucked-in motor cooling air, 1 piece
    Art. no. 7.160.000.213
  • 50 mm hose connector for process air discharge, 1 piece
    Art. no. 7.200.000.001
  • Water discharge hose, length 5 m, ø 12 mm
    Art. no. 7.331.000.476
Protective cover

Might as well order this, too:
Suitable protective cover, can also be used when stacked. Ideal to protect the Qube+ from dirt during storage and to prevent scratching during transport.
Art. no. 6.100.003.15


All-weather sound protection hood

Our accessory tip: All-weather sound protection hood

Art. no. 6.100.000.070

  • Noise emission reduced by up to 5 dB(A) and high frequencies additionally modulated into low-frequency range perceived as more quiet
  • Easily washable and waterproof material
  • Ideal for the continuous operation in living environments
  • Ideally suited for outdoor installation, for example for drying flat roofs
  • Double zip system for quick installation and access
  • Inlet and exhaust air openings guarantee optimum cooling of the motor without heat build-up
  • Can also be used for Qube+ with drying control unit DA 4 Qube attached

Shop

Qube+ Insulation Dryer show in Trotec online shop

Qube+ Insulation Dryer

World-wide unique Intregral solution: VX-5 turbine, WA 4i water separator, HEPA filter and NR19 silencer combined in one unit. The Qube+ can be used to eliminate all "practice time-eaters" - so you profit from extreme productivity gains in your day-to-day renovation routine!

  

Price on request

Daily rent:
24.00 € incl. VAT per day
Show net price (VAT not included)

rent

Details

Technical data
General information
  Article number 1.560.000.055
Suitable for surfaces sized up to (low pressure)
  Stage 1 [m²] 25
  Stage 2 [m²] 50
  Stage 3 [m²] 85
Peak low pressure
  Max. low pressure [mbar] 220
Air volume (freely blowing)
  Max. air volume freely blowing [m³/h] 250
Volumetric flow rate HiDry (sucking in)
  Stage Whisper mode [m³/h] 90
  Stage 1 [m³/h] 90
  Stage 2 [m³/h] 140
  Stage 3 [m³/h] 160
  Stage Boost mode [m³/h] 180
Motor power
  Stage Min. [kW] 0.2
  Stage Max. [kW] 1.2
Sound values
  Stage Min. - Distance 3 m [dB(A)] 48
  Stage Max. - Distance 3 m [dB(A)] 62
Collection container
  Volume [l] 10
Electrical values
  Mains connection 230 V/50 Hz
  Nominal current consumption [A] 6.7
  Recommended fusing [A] 16
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 3.5
Dimensions
  Length (packaging excluded) [mm] 490
  Width (packaging excluded) [mm] 500
  Height (packaging excluded) [mm] 735
Weight
  (packaging excluded) [kg] 25.2
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Stackable
  Rollable
  Carriage design
Connections
  Hose connections insulation drying 3 x Ø 38 mm
  TTKwic dehumidifier quick couplings [x] 2
  Waste water connection
  50 mm connector for process air discharge
  Service power socket
Display and Operation
  Power meter - yes Digital
  NT multi-function display
  Plain text status indication
  Power control indicator
  touchscreen control panel
  Digital operating hours counter
  Residual water draining
Control and Monitoring
  DA-4 interface
  Efidry humidity sensor connection
  Overflow sensor with automatic switch-off
Standard equipment
  Baffle plate for coarse filtration
  Stainless steel demister for water separation and fine filtration
  Cable holder with fixable plug
  Maintenance quick release fasteners

 standard equipment

 optionally available

 not available

Accessories

Connectors VE/VX Series show in Trotec online shop

Connectors VE/VX Series

Connectors for the side channel compressors from VE/VX series.

11.20 £ incl. VAT
Show net price (VAT not included)

buy

Seminars

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social