Mobile tent heater IDS 30 F

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

Mobile tent heater IDS 30 F

The ideal solution for emergency and rescue services as well as municipal support organizations

The indirect oil heater fan IDS 30 F was specifically developed for the mobile application as tent heater.

This easily portable device, stackable for both storage and transport, comes equipped with a robust frame with shock protection and carry handles as well as a hose connector already preassembled.

We deliberately decided against integrating a tank in the IDS 30 F so that users can benefit from not only the lesser weight but also from time-saving loading since it is not necessary to drain the tank completely of residues. The absent tank also means that no additional transport or insurance documents are required for transport and storage.

The fuel supply of the oil heater fan IDS 30 F can be effected either via a large external tank or jerrycan – appropriate accessories are available for both types of application.

The heating device is prepared for fully automatic thermostat-controlled operation ex works. For use inside a tent, an external thermostat can be connected optionally using a cable of ten metres length.

As standard, the oil heater fan comes equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Furthermore, the double-walled housing with protective coating offers an effective soundproofing and increased safety at work, for the surface temperature of the outer casing and thus the risk of injuries is minimized.

Its robust construction, the many practice-oriented handling characteristics and flexible application, transport and storage possibilities render the tent heater IDS 30 F the ideal solution for emergency and rescue services or municipal support organizations.

 

 

Mobile tent heater IDS 30 F

A few practical benefits:

  • 100 % clean heat
  • High level of efficiency
  • Stainless steel combustion chamber
  • Electronic flame trap
  • Overheating thermostat
  • Double-walled housing for optimum soundproofing and insulation
  • No integrated tank
  • Stackable frame with shock protection, skids and 4 carry handles
  • Mounted hose connector
  • Flue pipe and rain cap included in the scope of delivery
Practical feature: An integrated retaining nozzle enables non-dripping connection of an optional jerrycan to the IDS 30 F during transport and refuelling.

Shop

Oil heater IDS 30 F show in Trotec online shop

Oil heater IDS 30 F

Whether you want it for your workshop, greenhouse or cow shed - the IDS 30 F made in EU provides ample amounts of heat and warmth wherever you need it. There are connecting points for an exhaust pipe and an air transport hose with 300mm diameter for optimal heat distribution.

1,589.57 £ incl. VAT
Show net price (VAT not included)

buy

Details

Technical data
General information
  Article number 1.430.000.128
Functional principle
  Method of heating indirect
  Method of heating direct
Amount of air
  Stage Max. [m³/h] 1,150
Fan
  Axial
  Radial
Nominal heat input
  Stage Max. [kW] 34.1
Nominal heat output
  Stage Max. [kW] 28.8
  Stage Max. [kcal] 24,764
Temperature increase
  Stage Max. [°C] 70
Electrical values
  Mains connection 230 V/50 Hz
  Current consumption [A] 1.56
Electric connection
  Connection plug CEE 7/7 (plug type F + E)
  Cable length [m] 1.2
Operation
  Overheating protection
  Connection for external thermostat
Fuel feed
  Fuel feed Danfoss pump
Fuel filter
  Available
Oil consumption
  Stage Max. [l/h] 3.25
Tank contents
  Contents in (l)
Hose connector
  Diameter [mm] 300
Chimney connection
  Available
  Diameter [mm] 150
Sound values
  Distance 1 m [dB(A)] 75
Suitable fuels
  EL fuel oil
  Low-sulphur EL fuel oil
  Jet fuel
  Diesel
Dimensions
  Length (packaging excluded) [mm] 1,260
  Width (packaging excluded) [mm] 475
  Height (packaging excluded) [mm] 770
Weight
  (packaging excluded) [kg] 56
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels
  Forklift
  Crane
  Plastic wheels
Housing design
  Steel
  Stainless steel

 standard equipment

 optionally available

 not available

Accessories

Thermostat with 10 m Cable / IDS Series Plug show in Trotec online shop

Thermostat with 10 m Cable / IDS Series Plug

All the models in the IDS-series are equipped with a thermostat connecting point on the side of the unit under the combustion chamber. The optionally available room thermostat can be used to operate the unit fully automatically.

73.28 £ incl. VAT
Show net price (VAT not included)

buy

Exhaust Gas Tube, rigid, 150 mm / 1 m show in Trotec online shop

Exhaust Gas Tube, rigid, 150 mm / 1 m

This exhaust pipe is suitable for use with a number of models in the IDS/IDE series oil heater. It improves safety by ensuring that the combustion gases which form when oil is burnt are directed up and away from the unit.

29.74 £ incl. VAT
Show net price (VAT not included)

buy

Exhaust Gas Tube, bend, 90 ° / 150 mm show in Trotec online shop

Exhaust Gas Tube, bend, 90 ° / 150 mm

This bend has an angle of 90° and a diameter of 150mm. Its suitable for use with the models in the IDS/IDE-series: IDS 30, IDS 45, IDS 80, IDS 100, IDE 50, IDE 60. Make sure that you contact and inform your local chimney sweep while carrying out planning on your exhaust system project.

23.36 £ incl. VAT
Show net price (VAT not included)

buy

Exhaust Gas Tube, Rain Cover,150 mm show in Trotec online shop

Exhaust Gas Tube, Rain Cover,150 mm

You would be well advised to order this accessory with the unit! The rain cap prevents water from getting into the exhaust pipe of your heating unit. This means that there's no need for you to worry about using your oil heater outside in poor weather. Fits exhaust pipes with a diameter of 150mm.

53.10 £ incl. VAT
Show net price (VAT not included)

buy

Connection kit for ext. canister tank for IDS 30 F show in Trotec online shop

Connection kit for ext. canister tank for IDS 30 F

The connection kit allows the use of an external canister tank with the oil heater IDS 30 F.

159.48 £ incl. VAT
Show net price (VAT not included)

buy

SP-C Flexible Duct, 305 mm, 7.6 m show in Trotec online shop

SP-C Flexible Duct, 305 mm, 7.6 m

Extremely valuable accessories for existing or mobile heating units. Can be connected directly to these as two metres of hose are made of neoprene and therefore extremely heat resistant.

90.27 £ incl. VAT
Show net price (VAT not included)

buy

Universal Lashing Belt for SP Series show in Trotec online shop

Universal Lashing Belt for SP Series

Flexible connecting straps made of special material with an automatic stop mechanism at the strap buckle. Can be used to connect the hoses to connecting pieces or connecting collars.

6.37 £ incl. VAT
Show net price (VAT not included)

buy

300 mm Adapter Coupling for IDS 30 show in Trotec online shop

300 mm Adapter Coupling for IDS 30

Recommended for the connection of SP-C flexible ducts to the IDS 30 oil space heater in order to prevent the duct from damage due to the high output temperatures of the heater.

78.59 £ incl. VAT
Show net price (VAT not included)

buy

Oil Hose incl. Rapid Connection Coupling, 5 m show in Trotec online shop

Oil Hose incl. Rapid Connection Coupling, 5 m

This oil pipe enables you to connect an external oil tank to a professional heating units in the ID-series. It comes equipped with a quick locking coupling and a 5m cable.

132.76 £ incl. VAT
Show net price (VAT not included)

buy

Connection kit for ext. oil tank for IDS 30 F show in Trotec online shop

Connection kit for ext. oil tank for IDS 30 F

The connection kit allows the use of an external oil tank with the oil heater IDS 30 F.

265.81 £ incl. VAT
Show net price (VAT not included)

buy

Fuel Level Indicator IDS Series show in Trotec online shop

Fuel Level Indicator IDS Series

Fuel level indicator for IDS oil heaters (except of IDS 100).

39.29 £ incl. VAT
Show net price (VAT not included)

buy

Fuel Tank Filter for IDS Oil Heaters show in Trotec online shop

Fuel Tank Filter for IDS Oil Heaters

Fuel oil filter for IDS oil heating units.

12.74 £ incl. VAT
Show net price (VAT not included)

buy

Alternative products

IDS 30 F with alternative products:

start comparison
IDE 30 Oil Fired Indirect Heater show in Trotec online shop

IDE 30 Oil Fired Indirect Heater

Oil fired indirect heater with an air flow rate of 760 m³/h, 30 kW heating performance and a maximum temperature increase of up to 95°C. The IDE 30 oil fired heater has an integrated thermostat for better control of the heating performance.

You save: 437.30 £

883.47 £ 446.17 £ incl. VAT
Show net price (VAT not included)

buy

IDS 30 Oil Fired Indirect Heater show in Trotec online shop

IDS 30 Oil Fired Indirect Heater

Whether you want it for your workshop, garage, greenhouse or cow shed - the IDS 30 made in EU provides ample amounts of heat and warmth wherever you need it. There are connecting points for an exhaust pipe and an air transport hose with 300mm diameter for optimal heat distribution.

954.74 £ incl. VAT
Show net price (VAT not included)

buy

Downloads

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social