Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

Infrared heating panel TIH 650

For the drying of wall surfaces in new buildings, clearing water damage or the renovation of old buildings

The professional infrared heating panel TIH 650 is optimally suited for surface drying of walls in new buildings or after a water damage. Especially massive brickwork can be dried faster as compared to conventional dehumidification.

A prerequisite for effective surface drying is, however, a homogenous heat distribution over the entire area of the hot plate.

Unlike conventional infrared heating panels, which often only achieve non-homogenous heat distribution, the use of innovative materials in the TIH 650 construction ensures a perfectly consistent radiation performance over the entire surface of the heating panel, which is additionally insulated at the rear and thus ensures an optimal radiation directed at the object and maximum energy efficiency.

Since the TIH 650 works noiselessly, it can also be used in residential areas without difficulty. Up to three infrared heating panels can be combined quickly and stably for large-scale drying in batch mode.

The special feet of the TIH 650 render an effective positioning of the heating panel child's play. They are designed in such a way that when the feet touch the wall the optimum heating distance and efficiency is automatically ensured. Hence, a distance measuring prior to setup is not required.

Compared to the previous model, the improved aluminium composite construction of the TIH 650 is now characterized by an even higher torsional rigidity.

As well as for construction drying and the drying of brickwork after water damage, the TIH 650 can also be used for the noiseless and odour-free heating of interior spaces.

A few practical benefits:

  • Professional quality "made in Germany" – originally produced by Trotec
  • High-quality infrared heating panel with a genuine 650 watts of heating capacity
  • Innovative materials enable a homogenous heat distribution over the entire area
  • Rear insulation ensures maximum energy efficiency and optimal radiation directed at the object
  • Highly efficient heating procedure with environmentally sound IR-C radiation for quick brickwork drying
  • Heat transport via light waves – direct object heating without convective loss
  • Clean warmth – no noise, no odour, no condensate, no oxygen consumption
  • Quickly and stably stackable due to three-point fixation with fitting handle
  • Robust aluminium composite construction with high torsional rigidity in maintenance-free Trotec quality
  • Integrated energy consumption meter (MID-compliant*)
The TIH 650 can be variably used vertically or horizontally. The feet can be disassembled without difficulty for space-saving transport. For the installation of the TIH 650 no tools are required.
The optionally available mounting accessories allow you to further expand the range of applications of the TIH 650 and to fasten the infrared heating panel individually or collectively also on customary assembly supports.
The energy consumption meter integrated as standard is MID-compliant* and thus enables a reliable documentation of the power consumption.
Energy consumption meter (MID-compliant*)

* What does MID compliant mean?

The European Measuring Instruments Directive (MID) has replaced the existing rules of national approval and subse-quent calibration in some areas. As a result, all power meters, which are used for energy consumption billing, must be MID compliant in the future.

Optionally available accessories:

Stacking handles set TIH 650
Assembly support connection set
Assembly support fastening clamps
Transport bag
Socket thermostat BN30

It pays to compare – professional heating panel TIH 650

Thermographic studies prove that conventional infrared heating panels often only achieve inhomogenous heat distribution, which cannot ensure a consistent surface drying. Furthermore, heating capacity frequently fluctuates with these models and the temperature especially at the heating elements is often far too high.

Extreme heat treatment can, however, result in grave consequences, especially for sensitive building materials. If, for example, gypsum building materials are excessively heated, crystallisation water desorbs, which can lead to a loss of the entire structural stability.

By contrast, the infrared heating panel TIH 650 is characterized by constant temperature values and a very consistent radiation performance over the entire area.

Heating capacity and wall distance of the TIH 650 were assessed by the designers in a way that, even with gypsum building materials, there can be no material heating to structurally destabilising temperature ranges.

The thermal image of the TIH 650 shows a homogenous radiation performance of the infrared heating panel over the entire surface.

A few practical basics

Water transport mechanisms in mineral building materials

Porous, mineral building materials are traversed by a network of pores and capillaries of various types, sizes and forms, which are essential for water transport. Depending on the moisture content in the building material, water transport basically takes place in two different ways: diffusion and water current.

In case of diffusion, water vapour can flow through the entire pore space (1).

With increasing moisture content, a water film forms at the surface of larger pore spaces, smaller pore bottlenecks are already completely filled with water (2).

When the building material is supersaturated, there is so much water in the enhanced pore spaces that it can only be transported in form of current (3).

This liquid water transport phase is far more efficient than diffusion.

In consequence we can stipulate the following regarding the suitability of infrared heating panels for wall drying:

  1. Drying by means of infrared heating panels is only reasonable with building materials with a high porosity and well-formed capillary systems, e.g. bricks and some natural stones.
  2. In case of greatly compacted wall building material with closed structures or small capillaries (concrete), the application of infrared heating panels has no drying effect, because water transport is predominantly effected by diffusion.
  3. An efficient drying performance can only be achieved in the liquid phase. The moisture follows the heat flow only during this phase.
  4. When the water current breaks off with an increasing degree of drying, transport is progressively effected by means of diffusion. From this moment the application of infrared heating panels is of no importance to the drying progress!

Conclusion: For as long as liquid water transport in soaked building materials is effected by means of water current, infrared heating panels can help to speed up drying.

Infrared heating panels, however, cannot fully replace dehumidifiers to achieve an equilibrium moisture content in the building material!

Shop

Infrared heating panel TIH 650 show in Trotec online shop

Infrared heating panel TIH 650

The heating panel enables an even heat distribution over the entire surface and is suitable for desiccation of massive brickwork after a renovation , but also for heating of housing rooms because it does not generate any noise when in use.

You save: 45.74 £

314.23 £ 268.49 £ incl. VAT
Show net price (VAT not included)

buy

Details

Technical data
General information
  Article number 1.410.003.025
Heating capacity
  in [W] 650
Effective range
  in [m²] 0.85
Electrical values
  Mains connection 230 V/50 Hz
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 3
  Integrated operating hours counter
Safety feature
  Overheating protection Available
Dimensions
  Length (packaging excluded) [mm] 36
  Width (packaging excluded) [mm] 1,370
  Height (packaging excluded) [mm] 625
Weight
  (packaging excluded) [kg] 10.7
Equipment, features and functions
Mobility
  Portable

 standard equipment

 optionally available

 not available

Accessories

Mounting clamp for TIH 500 S / TIH 700 S show in Trotec online shop

Mounting clamp for TIH 500 S / TIH 700 S

Mounting clamps for secure mounting of infrared heating panel TIH 500 S / TIH 7000 S on a telescopic rod. Optimal solution for heating of the higher sections of the walls.

21.30 £ incl. VAT
Show net price (VAT not included)

buy

Transport Bag for TIH 630 / TIH 650 / TIH 700 S show in Trotec online shop

Transport Bag for TIH 630 / TIH 650 / TIH 700 S

For an easy and comfortable transport of TIH 630 / TIH 650 / TIH 700 S infrared heating panels.

24.50 £ incl. VAT
Show net price (VAT not included)

buy

Alternative products

TIH 650 with alternative products:

start comparison
Infrared Heating Plate / Infrared Heater TIH 1100 S show in Trotec online shop

Infrared Heating Plate / Infrared Heater TIH 1100 S

The heating plate enables a homogenous heat distribution across the entire area and is ideal for drying solid brickwork following a restructuring. It can also be used for silent domestic heating.

You save: 125.32 £

268.49 £ 143.17 £ incl. VAT
Show net price (VAT not included)

buy

Infrared heating panel TIH 500 S show in Trotec online shop

Infrared heating panel TIH 500 S

The heating panel enables an even heat distribution over the entire surface and is suitable for desiccation of massive brickwork after a renovation , but also for silent heating of housing rooms.

You save: 44.76 £

152.13 £ 107.37 £ incl. VAT
Show net price (VAT not included)

buy

Infrared heating panel TIH 700 S show in Trotec online shop

Infrared heating panel TIH 700 S

The heating panel enables an even heat distribution over the entire surface and is suitable for desiccation of massive brickwork after a renovation , but also for silent heating of housing rooms.

You save: 53.71 £

178.99 £ 125.28 £ incl. VAT
Show net price (VAT not included)

buy

Seminars

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social