TTR 800

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

Industrial desiccant dehumidifier TTR 800

The TTR 800 is provided with separate air flow ducts for process and regeneration air with G4 air filters in Z-line design and with a separately adjustable fan for each air flow duct. Owing to this TTR Trisorp Dual principle with dual air circulation the desiccant dehumidifier can be flexibly used in pressure-tolerant recirculation mode for diverse industrial dehumidification tasks – regardless of the installation site being inside or outside the room to be dehumidified.

Configurable air direction reversal

For stationary industrial applications dehumidifiers often have pipe connections and yet it must be possible to integrate them flexibly into existing process sequences. Here the TTR 800 scores especially with its configurable air direction reversal. With the operator side always facing the user, the air flow direction can easily be adjusted as needed by means of a modular conversion. Blowing out dry air to the right and discharging humid air to the left – or the other way round – with the TTR 800 the air direction reversal can be carried out with minimal effort.

The Duoventic air volume regulation is integrated as standard; both fans of the separate air circuits can be controlled independently via an infinitely variable electronic regulation. As a result you can always use the full potential of the TTR 800 quickly and in line with demand without any conversions while simultaneously configuring every climate scenario with only one device.

Duoventic enables the separate fine adjustment of moisture content and volumetric flow of the dry air required without the need to e.g. install energy-wasting throttle valves to regulate the air volume as has often been customary so far.

Available to you beside the comprehensive standard equipment including Duoventic control, rotation control, overtemperature protection system with restart lock, operating temperature management, filter monitoring with collective warning light, terminals external On/Off, terminals hygrostat as well as potential-free contacts for operation, fault and filter are manifold equipment options by means of which you can adjust the desiccant dehumidifier TTR 800 individually to various specific application requirements.

Since the TTR 800 was developed and manufactured in Germany according to the highest quality standards and houses only efficient branded components of the latest generation of technology supplied by leading component manufacturers, the device is characterized by a long lifetime – ideal for the continuous production of dry air at low dew points, for dry keeping applications in cold surroundings or the constant provision of dry air for industrial processes.

A few practical benefits:

  • Professional quality "made in Germany" – originally produced by Trotec
  • High dehumidification performance even with low dew points
  • Robust stainless steel housing with IP44 type of protection
  • Reliable silica gel sorption rotor
  • Configurable air direction reversal (conversion requires minimal effort)
  • Duoventic control – the performance of each fan can be set individually via a potentiometer
  • Electric regeneration heating
  • Filter monitoring (per air current and collective warning light)
  • Can be configured individually for almost any application due to manifold equipment options
 

Shop

TTR 800 Desiccant Dehumidifier show in Trotec online shop

TTR 800 Desiccant Dehumidifier

The TTR 800 is a powerful adsorption dryer for industrial application and convinces with a dehumidification performance of 86,4 kg a day and air flow rate of 950 m³/h at 300 Pa.

  

Price on request

Daily rent:
50.40 € incl. VAT per day
Show net price (VAT not included)

rent

Details

Technical data
General information
  Article number 1.110.000.150
Dry air (in case of intake air 20°C / 60 % RH)
  Dehumidification [kg/24h] 86.4
  Dehumidification [kg/h] 3.6
  Air volume free-blowing [m³/h] 950
  Nominal air volume [m³/h] 750
  External compression [Pa] 300
  Connection inlet Ø [mm] 250
  Connection outlet Ø [mm] 250
Regeneration air
  Nominal air volume [m³/h] 130
  External compression [Pa] 300
  Connection inlet Ø [mm] 160
  Connection outlet Ø [mm] 160
Operating principle
  Operating principle TTR Trisorp Dual
Operating range
  Min. temperature [°C] -20
  Max. temperature [°C] 40
  Min. humidity [% RH] 0
  Max. humidity [% RH (non-condensing)] 100
Electrical values
  Mains connection 480 V/50 - 60 Hz
  Nominal current consumption [A] 7.5
  Installed capacity [kW] 4.9
  Heating capacity [kW] 4.1
  Recommended fusing [A] 16
Electric connection
  Terminal connection
Automatic dehumidification
  Non-stop dehumidification
Dimensions
  Length (packaging excluded) [mm] 625
  Width (packaging excluded) [mm] 650
  Height (packaging excluded) [mm] 940
Weight
  (packaging excluded) [kg] 85
Equipment, features and functions
Housing type
  Stainless steel
  Steel housing, galvanized and painted
Device version
  Indoor installation (standard)
  Hiring model
  Stackable
  Shelter against the weather
Equipment
  Wide-range voltage
  Rotor rotation control (rotor and drive)
  Overtemperature protection system with restart lock (regeneration air)
  Operating temperature management (regeneration air)
  Filter monitoring (per air current and collective warning light)
  Duoventic control
  Configurable air direction reversal (conversion requires minimal effort)
  Terminals for external ON/OFF
  Terminals hygrostat
  Potential-free contacts (operation, fault, filter)
  Operating hours counter
  Air volume regulation
  Integrated heat recovery
  Hygrostat (electronic)
  Hygrostat (mechanical)
  Moisture control
  Moisture and temperature registration
  Sensor-supported Flowmatic control
  Power meter
  Ammeter
  DIN socket for external ON/OFF
Regeneration heating design
  Electric resistance
  Electric PTC
  Saturated vapour (4 bar)
  Gas
Air pre- and post-treatment
  Pre-cooling
  After-cooling
Mobility
  Carry/transport handle(s)
  Non-marking rubber wheels
  Stacking device
  Non-marking rubber feet
  Transport frame
  Swivel casters with brake
  Trestle rollers
  Crane lifting gear
  Forklift pockets

 standard equipment

 optionally available

 not available

Accessories

HG 120 S Hygrostat (from TTR 160) show in Trotec online shop

HG 120 S Hygrostat (from TTR 160)

Two position controller to control the relative humidity in conditioning cabinets, storage and production halls or in offices and computer rooms. Can be used in combination with a humidifier or a dehumidifier and is ideal for automatic climate conditioning.

74.34 £ incl. VAT
Show net price (VAT not included)

buy

SP-T Hose 255 mm, 7,6 m show in Trotec online shop

SP-T Hose 255 mm, 7,6 m

This air transport hose with 255 mm diameter is partcularly flexible and in proportion 1:10 compressible. Simultaneously, the PVC- coated polyamide fabric is reinforced with steel spirals, so that it will be protected from kniking.

62.65 £ incl. VAT
Show net price (VAT not included)

buy

TF-L Flexible Duct, 160 mm, 6 m show in Trotec online shop

TF-L Flexible Duct, 160 mm, 6 m

It is light and therefore easy to transport and handle. It has a bending radius of 1 x diameter and is extremely flexible and ideal for a variety of applications. The specially coated material has anti-abrasive properties and flame retardant. The inner diameter is 160mm.

39.29 £ incl. VAT
Show net price (VAT not included)

buy

G4 Z-Line-Filter for TAC 750 E / TAC 1500 and TTR 800 / 1400 / 2000 / 2800 / 3700 show in Trotec online shop

G4 Z-Line-Filter for TAC 750 E / TAC 1500 and TTR 800 / 1400 / 2000 / 2800 / 3700

G4 Z-Line-Filter to filter out coarse dust for TAC 750 E and TAC 1500 air purifiers and also for dessicant dehumidifiers TTR 800, 1400, 2000, 2800, 3700.

12.74 £ incl. VAT
Show net price (VAT not included)

buy

Alternative products

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social