Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

TilexPro –The tile lifting system for professionals

If there is a defect underneath the tiling or a core hole needs to be drilled, it so far was the rule that the concerned tile had to be destroyed and replaced upon completion of the restoration work.

The problem:

Rare tiles or older patterns, which can no longer be obtained or only at high expense.

The solution:

With TilexPro you can lift most tiles and reinsert them after completed restoration without damage!

The TilexPro system is characterized by practical details: Depending on the model, the system chamber can be adjusted to all common tile formats – square and rectangular – sized up to 30 cm or 50 cm.

TilexPro comes with carry handles of thermally non-conducting material – that way the heated chamber can be put aside from the respective tile without the need of wearing protective gloves to remove it.

The Trotec tile lifting system TilexPro is available in two different models:

TilexPro system 30
for tile formats sized up to 30 cm
Art. no. 6.100.000.050

TilexPro system 50
for tile formats sized up to 50 cm
Art. no. 6.100.000.052

Every TilexPro system consists of the system chamber and an optionally available hot air blower.

Further recommended accessories for using the system are a joint cutter and a combination device to remove the adhesive residues from tile and ground.

With the TilexPro system tiles can be detached from the ground in just a few steps:

First, the tile is bared by use of a joint cutter.

Then the system chamber is adjusted in size to match the tile to be removed, positioned and warmed up with the hot air blower.

After that, the tile can be detached from the ground in only a few steps and reinserted after completed restoration without risking damage.

A few practical benefits:

  • Ideal solution especially for valuable tiles or older, hard-to-replace patterns
  • Existing tiles can be lifted and reinserted after completed restoration without risking damage
  • Adjustable system chamber for square and rectangular tiles sized up to 30 cm or 50 cm
  • Carry handles made of thermally non-conductive material

Preserving tiles and saving costs –
no problem with the TilexPro!

Regarding accessories also put your trust in the advantages of a grand brand:

The patented TilexPro system is a durable and robust product "made in Germany"

Tile lifting system TilexPro 30

TilexPro 30 Tile Lifter show in Trotec online shop

TilexPro 30 Tile Lifter

No more broken tiles during restoration work. The TilexPro can lift floor tiles from their bed and replace them again undamaged when restoration has been carried out. Can be used for tiles up to 30cm and is equipped with a non-heat conducting carry handle.

84.06 £ incl. VAT
Show net price (VAT not included)

buy

Technical data
General information
  Article number 6.100.000.050
Connector
  Number 1
  Diameter [mm] 45
Dimensions
  Length (packaging excluded) [mm] 320
  Width (packaging excluded) [mm] 320
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 4.4

 standard equipment

 optionally available

 not available

Tile lifting system TilexPro 50

TilexPro 50 Tile Lifter show in Trotec online shop

TilexPro 50 Tile Lifter

First a joint cutter is used to cut round the tile. The TilexPro's system chamber is then adjusted to fit the tile, placed on the tile and heated with a heat blower. The tile can then be lifted from the floor and replaced when work has been completed without being damaged. Fits tiles up to 50cm.

126.09 £ incl. VAT
Show net price (VAT not included)

buy

Technical data
General information
  Article number 6.100.000.052
Connector
  Number 1
  Diameter [mm] 40
Dimensions
  Length (packaging excluded) [mm] 520
  Width (packaging excluded) [mm] 520
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 7.2

 standard equipment

 optionally available

 not available

Accessories

HyStream 3400 Hot Air Blower show in Trotec online shop

HyStream 3400 Hot Air Blower

The new Trotec HyStream 3400 Hot Air Blower with a maximum output of 3400 watts. There can be up to 230 l / min air blow out at an air pressure of 3000 Pa. The maximum attainable temperature is 650°C.

You save: 88.30 £

309.01 £ 220.71 £ incl. VAT
Show net price (VAT not included)

buy

Downloads

Operating manual – tile lifting system (INT)

Operating manual – tile lifting system (INT)

TRT-BA-TILEX-HS-002-INT.pdf (420 KB)

Download

The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Sitemap
Social