Rotary hammer PRDS 11-230V
Powerful chiselling, hammer drilling and rotary drilling at a value-for-money ratio that will hit you like a hammer
Powerful hammering in concrete or brickwork, chiselling as well as drilling with an extremely high capacity of 1,600 W
As a professional rotary hammer of the 6 kg class the PRDS 11-230V with an impact energy of 6 joules possesses enormous power reserves and due to the robust aluminium gearhead and the pneumatic hammer mechanism it provides the perfect solution for continuous high-performance operations during renovation, installation, construction and chiselling work.
With the PRDS 11-230V you will never lack the knack: You want to chip off old tiles, chisel out the chasing for cables, produce small wall openings or perform demolition work? Insert chisel, activate rotation stop and let it rip.
Now proceed with hammer drill holes in concrete or granite? Simply change the tool – easily done with one hand only due to the SDS-plus chuck – and activate the additional drilling function at the rotary switch. With great frequency the pneumatic hammer mechanism of the PRDS 11-230V produces individual strokes with an impact energy of 6 joules and so makes it easier to drill through even the hardest of materials regardless of the contact pressure. Moreover, for drilling into wood and metal the hammer function of the PRDS 11-230V can also be deactivated completely.
One device – four functions: The PRDS 11‑230V can be used flexibly for chiselling, changing the chisel position, hammer drilling and rotary drilling.
The supplied depth stop is a practical accessory for all drilling operations. It not only permits the compliance with specified drilling depths or allows several holes of identical depth, it also helps pros save money: If, for instance, 500 dowel holes are each drilled in by 6 mm more than necessary, this adds up to 3 metres of unnecessary bit wear and the corresponding early need for replacement.
An optional drill bit and chisel set of proven Trotec quality is available to extend the application possibilities of the rotary hammer PRDS 11-230V.
A fine ergonomic design may be stirring your soul, but never your hand
In an agreeably ergonomic manner, this rotary hammer demonstrates that manageability and high performance must not be mutually exclusive. Its special L-shaped design with the vibration-damped main handle ensures that the centre of gravity of the PRDS 11-230V is perfectly balanced. The additional handle is further adjustable by 360° for optimum handling at any time – even in confined workspaces.
Combined with the infinitely variable impact rate and speed control of this rotary hammer you can adjust the required power of the PRDS 11-230V to each task and material. As a result the possible applications range from spudding sensitive tiles to the rapid large-scale chiselling with fast work progress. Rotary hammers
During core drilling – e.g. for sanitary or electrical installations – you can also benefit from the performance advantages of this rotary hammer, for the extremely powerful impact mechanism ensures maximum advancing for efficient results – especially with large-diameter drill bits.
When the function selector switch is set to the centre position, the chisel can easily be rotated by up to 360° by pressing the on/off switch.
The key equipment features of the PRDS 11-230V at a glance
The PRDS 11-230V can be used for chiselling, hammer drilling and rotary drilling
All rotary hammers in direct comparison:
To find the rotary hammer which exactly meets your requirements, please consult the concise overview of all rotary hammers from Trotec, which we’re providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Powerful hammering in concrete or brickwork, chiselling as well as drilling with an extremely high capacity of 1,600 W
- Pneumatic hammer mechanism with an impact energy of 6 joules – maximum impact power in hard materials regardless of the contact pressure
- Ergonomic L-shaped design with a perfectly positioned centre of gravity
- Vibration-damped main handle and infinitely adjustable additional handle for optimum handling
- Quick tool change thanks to SDS-plus chuck
- Function selector switch with safety lock
- Rotation stop function for chiselling and hammer stop for drilling in metal and wood
- Infinitely variable impact rate and speed control for material-compatible working
- The chisel position can conveniently be adjusted by 360°.
- Incl. key-type drill chuck with SDS shank to use straight-shank drill bits
All important features at a glance
The rotary hammer PRDS 11‑230V is supplied as complete package incl. key-type drill chuck with SDS-plus shank, SDS pointed chisel 14 x 250 mm, SDS flat chisel 14 x 250 mm, three SDS drill bits 8/10/12 x 150 mm, drill chuck key, metal depth stop, dust protection cap, lubricant container and transport case.
Brand quality plus cost-efficiency
So far, you basically only had two options when choosing a cordless rotary hammer: either good but expensive, or mainly cheap.
Trotec's PowerTools now offer a smart choice: good and cheap at the same time. For we do not only stand for measuring devices and air conditioners, but also for power tools of brand quality: professional Trotec solutions with an excellent value-for-money ratio!
standard equipment
optionally available
not available
Buy
/en_GB/4415000102/Hammer-and-Chisel-Drill-PRDS-11%E2%80%91230V-104636-1557499580.jpg)
Hammer and Chisel Drill PRDS 11‑230V
You save: 31 %
94.95 £
64.95 £
incl. VAT
Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.415.000.102 | |
| Technical data | ||
| Number of speed levels | 1 | |
| Idle speed 1. Speed level | 0 - 800 | |
| Impact frequency combined 1. Speed level | 0 - 4.000 min-1 | |
| Impact energy [Joule] | 6 | |
| Tool holder | SDS-plus | |
| Max. chucking range [mm] | 13 | |
| Maximum drilling diameter | ||
| Wood [mm] | 40 | |
| Metal [mm] | 13 | |
| Masonry / bricks [mm] | 32 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Power input [W] | 1,600 | |
| Connection plug | CEE 7/17 | |
| Cable length [m] | 3 | |
| Protection class | II | |
| Sound values according to EN 60745 | ||
| Sound pressure level hammer drilling [[dB(A)]] | 93.5 | |
| Sound power level hammer drilling [[dB(A)]] | 104.5 | |
| Uncertainty (K) [dB] | 3 | |
| Vibration information according to EN 60745 | ||
| Vibration emission value for hammer drilling in concrete (ah) [m/s2] | 15.037 | |
| Uncertainty hammer drilling in concrete (K) [m/s2] | 1.5 | |
| Vibration emission value for chiselling (ah) [m/s2] | 14.868 | |
| Uncertainty chiselling (K) [m/s2] | 1.5 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 390 | |
| Width (packaging excluded) [mm] | 95 | |
| Height (packaging excluded) [mm] | 250 | |
| Weight | ||
| (packaging excluded) [kg] | 6 | |
| Equipment, features and functions | ||
|---|---|---|
| Functions and features | ||
| Infinitely variable speed control | ||
| Clockwise / counter-clockwise rotation | ||
| Function selector switch | ||
| Function selector switch with release button (safety lock) | ||
| Switch for the impact mechanism | ||
| Functions | Drilling, Impact drilling, Chiselling, Chisel position adjustable by up to 360° | |
| SDS-plus system tool holder | ||
| Tool-free exchange of accessories | ||
| Pneumatic hammer mechanism | ||
| Venting slots | ||
| Vibration damping | ||
| Integrated LED work lamp | ||
| Softgrip | ||
| Standard scope of delivery | ||
|---|---|---|
| Accessories scope of delivery | ||
| SDS flat chisel | 14x250 mm | |
| SDS pointed chisel | 14x250 mm | |
| 3 SDS drill bits | 8/10/12x150 mm | |
| Drill chuck key | ||
| Additional handle | ||
| Additional handle (can be rotated by 360°) | ||
| Depth stop | ||
| Lubricant container | ||
| Dust protection cap | ||
| Transport case | ||
standard equipment
optionally available
not available