Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Submerged clear water pump TWP 7505 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged clear water pumps
  6. TWP 7505 E

Submerged clear water pump TWP 7505 E

750 W pump with near-ground suction for wipe-dry results with a flow rate of up to 13,000 l/h

Impressive 750 watts of power for pumping up to 13,000 litres per hour

The submerged pump TWP 7505 E impresses with its high performance and easy handling. That makes it an equally attractive purchase object for home owners needing a tool for the quick and efficient elimination of a leakage in interior spaces as it does for professional and amateur gardeners wanting to pump over irrigation water from wells, rain barrels and tanks outside. It is ideally suited for use to a delivery head of 10 metres. The maximum flow rate amounts to remarkable 13,000 l/h.

With its powerful and maintenance-free 750 W motor the clear water pump TWP 7505 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. Owing to the high conveying capacity the submerged pump drains flooded basements and laundry facilities before you know it, pumps dry entire swimming pools at a remarkable speed and ensures the quick pumping over of water in cisterns and rain barrels that are full to the brim. The convenient backflow preventer keeps the hose from running dry after switch-off and so reduces the time to restart suction.

Pump it off and mop it up, that's all it takes!

The device with near-ground suction pumps level ground "wipe-dry", i.e. to a residual water level of only 3 mm. Hence, the clear water pump is ideally suited for drying shallowly flooded surfaces f.i. in basements or swimming pools quickly and thoroughly. All the TWP 7505 E needs to start the internal pump wheel is a water level of 80 mm. 

The both watertight and impact-resistant plastic housing of the pump is suitable for underwater application to a depth of 7 metres. Seeing as the submerged clear water pump comes equipped with an integrated thermal protection circuit for overheating protection it is also optimally prepared for long-term applications. A high-quality ceramic face seal and a low-wear shaft further ensure the durability of the TWP 7505 E.

Do you need maximum pump capacity or is a little less also sufficient?

Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E and TWP 9005 E recommend themselves with a maximum delivery head of 7.5 or 11.5 metres and a flow rate of up to 7,000 or 14,000 litres per hour.

Quick and easy handling

Thanks to the steplessly lockable float switch the functioning of the electric pump is conceivably easy: simply set the desired water level and the automatic switch-on/switch-off function will take care of the rest. Evidently, manual operation is also possible at a low water level.

Via the float switch you can control the water level in the room or container to be drained. The pump switches on and off automatically according to the height of the float switch.

Convenient handling

The comfortable carrying handle facilitates transportation of the TWP 7505 E within the garden or to any other application site. At the same time it can be used as pump suspension option using the supplied nylon cord, e.g. for lowering the pump down into a pool. The compact device is equipped with universal connections at the elbow for inner diameters of 25 mm and 32 mm as well as 1'', 1¼'' and 1½''.

If desired, further hoses can quickly and easily be connected to the pump using the existing threaded connectors. The elbow's position can be freely adjusted, as a result it is possible for hoses and pipes to run parallel to the ground. The power cable of 10 m length offers a wide operating range.

Special equipment features of the TWP 7505 E

Particle size: 5 mm
The submerged clear water pump TWP 7505 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres.
Ceramic face seal
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Integrated backflow preventer
The integrated backflow preventer (non-return valve) prevents the return flow of the water at the end of the pumping process.
Universal connections
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1’’ / 1¼’’ / 1½’’ threaded connectors can be flexibly coupled with the pump.
Steplessly adjustable float switch
The height for the pump’s automatic switch-on/-off can be reliably regulated by means of the steplessly adjustable float switch.
Near-ground suction during continuous operation to a residual water level of 3 mm
When locking the float switch in horizontal position, the pump operates continually and sucks off the water until the ground is “wipe-dry” (only 3 mm remain).
Ergonomic carrying handle
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Schematic overview
TWP 7505 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, delivery head and submersion depth.

The TWP 7505 E is extremely versatile:

Immersion depth: 7 metres
Up to an immersion depth of 7 metres, the pump is ideally suited for all applications in clear or only slightly contaminated and chlorinated water.
For use in slightly contaminated water as collected in rain barrels
With the submerged pump TWP 7505 E pumping off or recirculating the slightly contaminated water from cisterns or rain barrels can be accomplished in a trice.
Application in swimming pools
The submerged clear water pump TWP 7505 E with near-ground suction pumps level ground “wipe-dry”, i.e. to a residual water level of only 3 mm.
Application in basement laundry rooms
The basement has been flooded owing to a defective washing machine? If the water to be pumped off is only slightly contaminated, this does not constitute a problem for the clean water pump TWP 7505 E.
Technical data in comparison

All submerged pumps in direct comparison:

To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 750 watts of power for pumping up to 13,000 litres per hour
  • Maximum delivery head: 10 m
  • Ideally suited for the recirculation of water, for pumping it off or out of e.g. swimming pools, rain barrels, wells or basements after a flood, heavy rainfall and during work in drainage shafts
  • For effortless pumping of clear water with suspended particles sized up to 5 mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Fixing option for the float switch during automatic operation
  • Near-ground suction to a level of 3 mm resulting in a wipe-dry floor
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Backflow preventer barring a return flow
  • Large ergonomic carrying handle – suitable for fastening the suspension cord
  • Submerged pump of TÜV-tested quality

All important features at a glance

Clean water
Powerful 750 W motor
Flow rate of 13,000 litres per hour
Delivery head of 10 metres
Immersion depth: 7 metres
A water level of no more than 80 mm is sufficient for starting the device
The device continues to operate to a residual water level of 3 mm
Slightly contaminated water with particle sizes of up to 5 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Integrated backflow preventer
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
Use if a washing machine has sprung a leak
Scope of delivery for the submerged clear water pump TWP 7505 E

The submerged pump TWP 7505 E is supplied as complete set including reducer (with preassembled backflow preventer and seal ring), elbow, a nylon cord of 12 m length and a 10 m power cable.

Delivery head and flow rate

Delivery head and flow rate of the TWP 7505 E

With the TWP 7505 E you are always on the safe side, for this submerged clear water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most diverse clear water applications: Those are some of the quality features of Trotec's submerged clear water pumps. No matter the demands, owing to their high capacity these pumps are never out of their depth. HighPerformance in every respect – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

Tested for safety, TÜV GS ID 1419062842


Technical data

Technical data
General information
  Article number 4.610.000.007
Electrical values
  Mains connection 230 - 240 V, 50 Hz
  Power input [kW] 0.75
Electric connection
  Connection plug CEE 7/4
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 13,000
  Grit of pump [mm] 5
  Max. delivery height [m] 10
  Max. submersion depth [m] 7
  Minimum operating depth [mm] 80
  Max. water level after suction [mm] 3
  Max. water temperature [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On/off switch (float switch) Automatic
  Switch-on point float switch [mm] 600
  Switch-off point float switch [mm] 180
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for both permanent operation (>10h) or salt-water operation
Housing design
Accessories scope of delivery
  Hose connection (inner diameter) 25 / 32 mm
  Threaded connection 1", 1 ¼", 1 ½"
  Backflow preventer
  Length (packaging excluded) [mm] 220
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 335
  (packaging excluded) [kg] 3.9

 standard equipment

 optionally available

 not available

Alternative products