Technology, sales, invoices:
Ask our specialists.
3-IN-1 MULTI-FUNCTIONAL SANDER PMSS 10-220
Large areas. Fine sanding. Clean corners.
The PMSS 10-220 is a tool congenial to its user. Regardless of whether you want to remove old coats of paint from large areas, polish and smoothen surfaces or sand precisely and seamlessly in corners: The 3-in-1 multi-functional sander from Trotec meets every requirement. And runs along at any given speed, for in just a few steps it can be turned into a full-fledged orbital sander, delta sander or random orbital sander.
For larger areas, fine sanding or clean corners – the 3-in-1 multi-functional sander permits very nuanced grinding operations. The PMSS 10-220 can be turned into orbital sander, delta sander or random orbital sander in a matter of seconds simply by exchanging three supplied, variably applicable sanding plates.
The respectively suitable sandpaper can be attached both quickly and without the need for tools – all sanding plates are provided with a Velcro® system. Moreover, the orbital sanding plate is fitted with a clamping tool, as a result you can also use sandpaper without Velcro® backing for this particular sanding application.
A power pack of 220 W reliably performs its duty inside the multi-purpose grinder without any sign of weakening. On the contrary, the motor ensures a constantly high performance and enables the stepless preselection of the oscillation rate between 14,000 and 24,000 oscillations per minute. This ensures material-compatible working on any surface.
All-rounder with excellent guidance properties
The PMSS 10-220 was designed for continuous operations without tiring. Seeing as it has a perfectly positioned centre of gravity, this multi-purpose grinder can be directed safely and precisely even during longer, large-scale operations. In addition to the main handle fitted with a soft grip rubber inlay for extra firm grip this all-rounder is equipped with a guide handle enabling secure two-hand operation. To ensure the convenient accessibility during operation, the front knob also houses the setting wheel for the selection of the oscillation rate, hence it can be adjusted as needed for the respective material.