Oops, an error occurred! Code: 20221207234601c51efc4b
Professional infrared thermometer employing multi-point laser technology
  1. Products & Services
  2. Measuring devices
  3. Temperature
  4. Contact and IR thermometers
  5. TP7 infrared thermometer

Pyrometer TP7

Professional infrared thermometer employing multi-point laser technology

TP7
TP7
TP7

You probably have never seen an infrared thermometer such as the TP7 before, for the practice-optimised German industrial design of this professional pyrometer is a protected design patent and 100 % Trotec.

In addition to the unique exterior looks the TP7 can also score with how it looks like on the inside. A distance factor of 40:1 permits precise measuring results from afar even for small objects.

Owing to the high temperature measuring range from -50 °C to +1,000 °C and the non-contact measurement principle, the robust TP7 is ideally suited for temperature measurements at poorly accessible, hot, movable or dangerous measuring locations.

Precise measurements straight to the multi-point

As should be expected from a professional IR thermometer, the TP7 is equipped with many practice-oriented functions, for instance, it allows the material-specific adjustment of the degree of emission, the indication of the maximum value or non-stop measuring operations.

Special emphasis should be placed on the innovative multi-point laser technology of the TP7. Instead of just pointing to the measuring target by means of a single laser or outlining the size of the measuring spot via double laser, the TP7's multi-point laser combines these two technologies and allows you to capture the measuring object both easily and precisely:

Whilst one targeting laser in the centre indicates the measuring point, further eight lasers show you the boundary points encircling the measuring surface – thus permitting precise measurements in a minimum of time.

Convenient alarm indication via change of display colour

Another time-saving function of the TP7 consists of an alarm-related colour change of the display illumination. You can enter user-defined alarm thresholds for measured minimum and maximum values in the device. Falling below the set limit value, the display will be flashing in blue, exceeding it, in red. In both cases an acoustic alarm signal will be emitted in addition. 

Thanks to this intuitive colour indication you can tell from one look whether the measured temperature is within the preset target value range. Consequently, even larger areas can be measured in a timely manner without having to pay attention to each individual measured value.

Optical resolution in a nutshell:

The optical resolution (D:S) defines the ratio of measuring distance and measuring spot diameter. With increasing distance to the measuring object the measuring spot also increases. The infrared thermometer calculates an average temperature from all the temperatures in the measuring spot.

The larger the measuring spot, the less precise is the measured result. And vice versa: the higher the optical resolution of the pyrometer, the smaller the measuring spot and the more precise the measurement.

With switched on background illumination the display of the TP7 will be illuminated in green. If the alarm function is activated and the measured value falls below the alarm threshold, the display flashes in blue, should the limit value be exceeded, it flashes red.
Backlit display changing its colour in case of temperature alarms
The TP7 offers a high optical resolution of 40:1 and comes equipped with a multi-point laser aiming aid that indicates both the measuring point and the boundary points encircling the measuring surface.
TP7 with multi-point laser technology and high optical resolution

With the TP7 you'll have a professional infrared thermometer suited for manifold fields of application

Backlit display
With activated background illumination the display is illuminated in green which renders it readily legible even in dark surroundings.
Low alarms indicated by the display flashing in blue and an additional alarm sound
Via the low alarm you can define a lower alarm limit value. Whenever falling below the user-defined alarm threshold, the display flashes blue and an acoustic alarm signal is emitted. A very handy feature for the quick detection of thermal bridges.
High alarms indicated by the display flashing in red and an additional alarm sound
An alarm sound can also be heard when exceeding the defined upper temperature limit value; additionally the display flashes red. With this change of display colour even larger areas can be measured in a timely manner without having to pay attention to each individual measured value.
Wide temperature measuring range from -50 °C to +1,000 °C
The TP7’s extensive measuring range between -50 °C and +1,000 °C enables various measuring applications. The multi-point laser aiming aid visualizes the measuring target point and the size of the measuring spot at the same time.
Contact and IR thermometers

All Contact and IR thermometers in direct comparison:

To find the Kontak ve kızılötesi termometre which exactly meets your requirements, please consult the concise overview of all Contact and IR thermometers from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Development, design, production: 100 % Trotec
  • Optical resolution 40:1
  • Non-contact surface temperature measurement from -50 °C to +1,000 °C
  • Multi-point laser aiming aid for simultaneous indication of measuring point and measuring spot
  • Degree of emission freely adjustable from 0.1 to 1.0
  • High/low alarms indicated by a change of display colour and an additional alarm sound
  • Backlit display
  • Automatic switch-off function
  • Practice-optimized German industrial design – protected design patent

Buy

Infrared Thermometer / Pyrometer TP7 Multi-Point Laser Thermometer show in Trotec online shop

Technical data

Technical data
General information
  Article number 3.510.003.012
Optics
  Optical resolution (D:S) 40:1
  Smallest measuring spot 25.4 mm
Infrared temperature sensor [°C]
  Min. measuring range | Infrared temperature sensor [°C] -50
  Max. measuring range | Infrared temperature sensor [°C] 1,000
  Max. accuracy [°C] | Infrared temperature sensor
  Accuracy < -4°C
  Accuracy -4°C to 65 °C
  Accuracy > 65 °C
  Accuracy < 20 °C
  Accuracy = 20 °C
  Accuracy -50 °C to 20 °C (-58 °F to 68 °F) ± 2.5
  Accuracy 21 °C to 300 °C ± 1
  Accuracy 301 °C to 1,000 °C ± 1.5
  Accuracy 21 °C to 400 °C
  Accuracy 401 °C to 800 °C
  Accuracy 800 °C to 1,600 °C
  Repeatability -50 °C to 20 °C ± 1.3
  Repeatability 21 °C to 1,000 °C ± 0.8 / ± 0.5
  Repeatability 21 °C to 1,200 °C
  Repeatability 1,201 °C to 1,600 °C
  Accuracy 20 °C to 500 °C (68 °F to 932 °F)
  Accuracy 500 °C to 1,000 °C (932 °F to 1,832 °F)
  Accuracy 1,000 °C to 1,850 °C (1832 °F to 3,362 °F)
  Repeatability 20 °C to 1,000 °C (68 °F to 1,832 °F)
  Repeatability 1,000 °C to 1,850 °C (1832 °F to 3,362 °F)
Infrared temperature sensor [°F]
  Min. measuring range | Infrared temperature sensor [°F] -58
  Max. measuring range | Infrared temperature sensor [°F] 1,832
  Accuracy ± min. [°F] 4.5
  Accuracy Max. [%] 1
Integrated temperature probe [°C]
  Min. measuring range | Integrated temperature probe [°C]
  Max. measuring range | Integrated temperature probe [°C]
  Accuracy ± min. [°C]
  Accuracy ± Max. [°C]
Integrated temperature probe [°F]
  Min. measuring range | Integrated temperature probe [°F]
  Max. measuring range | Integrated temperature probe [°F]
  Accuracy ± < 23 °F to 150 °F °F [°F]
  Accuracy ± > 150 °F [°F]
Dew point temperature [°C]
  Min. measuring range | Dew point temperature [°C]
  Max. measuring range | Dew point temperature [°C]
  Accuracy
Humidity
  Min. measuring range | Humidity [%]
  Max. measuring range | Humidity [%]
  Accuracy [%] | Humidity
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 50
  Operation – min. relative humidity [% r.F.] 10
  Operation - max. relative humidity (non-condensing) [%] 90
  Storage - min. temperature [°C] -10
  Storage - max. temperature [°C] 60
  Storage - max. relative humidity (non-condensing) [%] 80
Display
  LCD
  Monochrome
Interfaces
  USB
  Plug connection for type K temperature sensor
Memory organisation
  Internal flash memory
Device control
  Push buttons
  Membrane keyboard
Type of protection
  IP54
  IP65
Temperature sensor
  Response time < 150 ms
  Spectral sensitivity 8 ~ 14 µm
Laser (target display)
  Class class 2
  Wavelength [nm] 630 ~ 670
  Power [mW] 1
Power supply
  Internal (battery) 9V battery
  External (USB)
Housing design
  Plastics
Dimensions
  Length (packaging excluded) [mm] 122
  Width (packaging excluded) [mm] 49
  Height (packaging excluded) [mm] 160
Weight
  (packaging excluded) [kg] 0.224
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Transport bag
  Battery(-ies)
  Operating manual
  Contact temperature sensor type K
  Carrying case
  USB cable
  Mini tripod
Ascertainable measured values and functions
Internal sensors
  Material temperature [°C]
  Material temperature [°F]
  Dew point temperature [°C]
  Dew point temperature [°F]
  Air temperature [°C]
  Air temperature [°F]
  Relative humidity [%]
Functions and features
  Selectable multi-point laser
  Automatic switch-off
  Acoustic alarm function
  Visual alarm function via LCD illumination in different colours (red/green/blue)
  Alarm function with user-defined limit values
  Display resolution 0.1°C
  Non-stop measuring function
  Degree of emission adjustable from 0.1 to 1.0
  Backlit LCD monitor
  Maximum value display
  Measured value hold function
  Switching function for temperature measuring units °C/°F
  Acoustic dew point alarm
  Bar graph indicator for the quick identification of condensation risks
  Battery status indication
  Differential value display
  Applicable for software-supported recording of measurement series
  Degree of emission fixed at 0.95
  Conforms with DIN 10955:2004
  Meets the specifications of the LFGB, §31 (German Food and Feed Code)
  HACCP quick indicator LED
  Maximum value indication
  Minimum value display
  Open targeting sights
  Tripod thread connection
  Timer function
  Visual dew point alarm
  Additional material temperature measurement using integrated type K insertion sensor
  Additional temperature measurement using external type K sensor
  Selectable single laser pointer
  Material temperature [°C]
  Material temperature [°F]

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...