MultiMeasure accessories
Suitable accessories for our multifunctional measuring device T3000: transport case, holster, extension rods and much more!
Transport Case II MultiMeasure Series T3000
To safely transport your T3000 multifunction device measuring equiptment.
64.83 £ incl. VAT
Show net price (VAT not included)
Holster 3 MultiMeasure-Series
Provides the comfortably and safely transport of your T3000 multifunction measuring instrument and of the T210, T260, T510, T610 and T660 compact hand measuring devices. Thanks to the practically zip, the device is securely protected and quickly ready for use.
19.44 £ incl. VAT
Show net price (VAT not included)
Telescopic Rod for T2000
The telescopic rod allows you to use the MultiMeasure SDI sensors to reach virtually inaccessible places. The attachment is ready to have the sensor fitted, so all you need to do is attach the sensor to the rod and then carry out the measurements you wish to perform.
91.83 £ incl. VAT
Show net price (VAT not included)
Screen Protector Film for T3000 / T210 / T260 / T510 / T610 / T660
Screen protector film for the measuring instruments T3000 / T210 / T260 / T510 / T610 / T660
8.64 £ incl. VAT
Show net price (VAT not included)
T210/T260/TS 210 SDI Sinter Protective Grille
Protects the T200 and T260 MultiMeasure handheld measuring devices and the TS 210 SDI sensor for the T 2000 E multifunction measuring device against dust, dirt and other contamination while in use on-site.
32.42 £ incl. VAT
Show net price (VAT not included)
TS 070 Electrode Tips, 45 mm, Teflon insulated
These teflon-insulated electrode tips are suitable for depth measuring with the TS 70 ram electrodes in the MultiMeasure Professional Series. The tips are 45 mm long and have a diameter of circa 1.5-2 mm.
48.62 £ incl. VAT
Show net price (VAT not included)
TS 070 Electrode Tips, 60 mm, Teflon insulated
These teflon isnsulated electrode tips are 60 mm long and approximately 1.5 – 2 mm in diameter and can be used together with the TS 70 ram electrode.
48.62 £ incl. VAT
Show net price (VAT not included)
Replacement Electrode Tips Can
Tin contains replacement non-insulated electrode tips .
6.49 £ incl. VAT
Show net price (VAT not included)
TC 20 Connecting Cable, BNC
This connecting cable can be used to connect Trotec material moisture electrodes for building material and wood to the BNC connector of your T 2000 S multifunction measuring device.
29.17 £ incl. VAT
Show net price (VAT not included)
TC 30 Connecting Cable, SDI Sensors
For connecting and using SDI sensors to measure the temperature and moisture in different materials as well as to measure the relative humidity and air flow rates and to detect trace gas together with a multifunctional measuring device.
32.42 £ incl. VAT
Show net price (VAT not included)
Calibration Block
Is required for one-point calibration of the relative humidity of climate measuring devices like the T210 and T260 as well as climate sensors like the TS 210 SDI und TS 220 SDI. Is used together with the calibration vial from our product range.
140.46 £ incl. VAT
Show net price (VAT not included)
Calibration Ampoules
They can be used to calibrate the T210 and the T260 MultiMeasure handheld measuring device and the TS 210 SDI und TS 220 SDI sensors together with the calibration block. The calibration phials are available for 35 %, 50 % and 80 % moisture.
42.14 £ incl. VAT
Show net price (VAT not included)
Test Block V1 for T510 / T3000
Is required for determining measuring deviations and for checking the measuring accuracy of the MultiMeasure products the T510 and the T3000.
102.64 £ incl. VAT
Show net price (VAT not included)
Contact Mass for TS 004 / TS 024
The contact mass is needed for measuring with the TS 004 MutliMeasure round electrodes TS 004 as well as the TS 024 depth electrodes.
21.61 £ incl. VAT
Show net price (VAT not included)