Direct oil heater fan IDX 20 D
Direct oil heater fan IDX 31 D
Direct oil heater fan IDX 50 D
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDX-D series

Oil heater fans of the Trotec IDX-D series

Why our IDX-D oil heaters make competitors black out: best value-for-money ratio with outstanding design and versatility. The powerful heating solution for well-ventilated rooms.

With the extremely manoeuvrable oil heater fans IDX 20 D, IDX 31 D and IDX 50 D, which are outstandingly equipped in their device class, Trotec once again raises the bar in terms of economical heating of well-ventilated rooms and warehouses. And competitors black out.

IDX 20 D – technical data
IDX 31 D – technical data
IDX 50 D – technical data

Working at comfortable temperatures regardless of the weather

Whether they're working in a workshop, warehouse, production facility, agricultural business or on a construction site – craftsmen, farmers and employees in production or workshops have to do their work even in bad weather and icy outside temperatures. The most common problem here: low temperatures at the workplace caused by the continuous supply of incoming cold air. At changing locations, where cold air constantly flows into the work area from outside, for example through open gates and material locks or in windowless shells and on semi-open construction sites, conventional heating solutions reach their limits in many respects. All of these applications require maximum mobility to supply the respective work area with targeted heat in a quick and economical way and without costly heating areas that are not used.

Clearly a case for the mobile oil heater fans of the IDX-D series

With a heating output of 20 to 55 kW and hot air volumes of up to 1,100 m³/h, the black power packs enable uninterrupted working throughout the day – at pleasant temperatures and with maximum mobility. Thanks to their manoeuvrable and robust carriage construction, the IDX direct oil heater fans impress with an almost unlimited versatility, while at the same time causing pleasantly low consumption costs.

Great heating capacity, low consumption costs

The powerful 20 kW oil heater fan IDX 20 D requires only 1.9 litres of oil per hour to supply the workplace with 450 m³/h of hot air for well-tempered working. Those who require more heating capacity can choose the IDX 31 D with a consumption of 3.0 l/h at a heating capacity of 30 kW and an air flow rate of up to 750 m³/h, or the IDX 50 D with a consumption of 4.8 l/h at an uncompromisingly strong heating capacity of 55 kW with an air volume of max. 1,100 m³/h.

Overview of IDX-D oil heater fans: The right heating capacity for every application:

Model Heating capacity Air flow rate Oil consumption Fuel tank
IDX 20 D 20 kW 450 m³/h 1.9 l/h 19 l
IDX 31 D 30 kW 750 m³/h 3.0 l/h 38 l
IDX 50 D 55 kW 1,100 m³/h 4.8 l/h 50 l
Suitable for drying construction sites, basements and damp masonry

Suitable for drying construction sites, basements and damp masonry

All oil heater fans of the IDX-D series are recommended for quickly and economically drying damp masonry – for example after heavy rainfall, storms, floods or pipe bursts – due to their enormous heating air volume and simultaneously low oil consumption.

PRODUCT BROCHURE

Enjoy pleasant refreshment! You can also find all the relevant information about our comfort air conditioning units in the product brochure. Download the PDF directly here.

To the PDF document

Functional principle of the IDX series

IDX direct oil heater fan – 100 % heating power for well-ventilated work areas

The directly fired oil heaters of the IDX-D series are recommended for economical use in well-ventilated indoor spaces, as they provide 100 % of the produced heat for heating the work area without any loss of power. This is why direct oil heater fans have no flue pipe, as is the case with indirectly fired oil heater fans, where part of the heat escapes into the open air via an exhaust air hose.

In other words, this process yields a heating power efficiency of 100 % – which is ideal, for example, if you wish to heat well-ventilated halls, stables or roofed over outdoor areas quickly and effectively.

In a directly heated system the fan blowing out the heated air also brings along combustion air.

First, the fuel is atomised, ignited and burned in the combustion chamber. Then the hot gases are admixed to the main air current of the fan in accurate proportions and blown out into the room.

In addition to heat, direct heaters thus also emit combustion gases directly into the room. For this reason, they are unsuitable for poorly ventilated, closed rooms used by people or animals.

Since plenty of moisture is released during combustion, direct heaters should never be used for construction drying.


IDX-D series – equipment features in direct comparison

Smooth-running carriage construction for easy change of location
Fuel tank with filling level indication and fuel filter
Thermostat with digital dual display for nominal and actual value
Thermostat with digital room temperature indication
Stainless steel combustion chamber
Pressure gauge / Adjustable air pressure
Model-specific equipment differences IDX 20 D IDX 31 D IDX 50 D
Smooth-running carriage construction for easy change of location
Fuel tank with filling level indication and fuel filter
Thermostat with digital dual display for nominal and actual value
Thermostat with digital room temperature indication
Stainless steel combustion chamber
Pressure gauge / Adjustable air pressure
Model-specific equipment differences IDX 20 D
Smooth-running carriage construction for easy change of location ➀
Fuel tank with filling level indication and fuel filter ➁
Thermostat with digital dual display for nominal and actual value ➂
Thermostat with digital room temperature indication ➃
Stainless steel combustion chamber ➄
Pressure gauge / Adjustable air pressure ➅
Model-specific equipment differences IDE 31 D
Smooth-running carriage construction for easy change of location ➀
Fuel tank with filling level indication and fuel filter ➁
Thermostat with digital dual display for nominal and actual value ➂
Thermostat with digital room temperature indication ➃
Stainless steel combustion chamber ➄
Pressure gauge / Adjustable air pressure ➅
Model-specific equipment differences IDX 50 D
Smooth-running carriage construction for easy change of location ➀
Fuel tank with filling level indication and fuel filter ➁
Thermostat with digital dual display for nominal and actual value ➂
Thermostat with digital room temperature indication ➃
Stainless steel combustion chamber ➄
Pressure gauge / Adjustable air pressure ➅

Included with all IDX-D: a comprehensive range of safety and comfort features that makes conventional oil heaters look small

  • Electronic flame trap
  • Overheating protection
  • Double-walled housing for optimum soundproofing and insulation

Technical data by comparison

All IDX-D oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDX-D series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Continue directly to the practical knowledge guidebook for professional heating

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

 standard equipment

 optionally available

 not available