Pool dehumidifier DS 30
Highly economical dehumidifier with powerful air circulating radial fan
Be it indoor swimming pools, whirlpools or wellness centres – for all areas with a high level of humidity and condensation efficient dehumidification is a must to ensure the well-being of visitors and to prevent damages to the building and inventory.
The pool dehumidifier DS 30 constitutes the perfect solution for all these requirements as the high-quality device of German manufacturing was specifically developed for this field of application.
Integrated in a corrosion-protected, fibreglass-reinforced plastic housing the DS 30 accommodates a silently running high-performance radial fan as well as evaporator and condenser with additionally polyester-coated surfaces.
The wall-mounted device designed for private indoor swimming pools sized up to 25 square metres can be installed easily, it operates fully automatically and withdraws large amounts of moisture from the room air.
The energy absorbed during the process of dehumidification is turned into warmth and directly used for heating the room, which further increases the device's profitability.
Installation and application possibilities
As standard all pool dehumidifiers come equipped with internal heat recovery, thus automatically utilizing the released process heat for low-cost heating of the room air.
The models DS 30 and DS 60 can optionally also be equipped with an additional electric heating as well.
Simple installation – immediately ready for use
Our pool dehumidifiers are delivered ready for connection. In case of wall-mounted devices the supplied wall mount needs to be installed first.
PRODUCT BROCHURE
Whether for swimming pools, whirlpool or wellness environments – all relevant information about our DS 30 and DS 60 swimming pool dehumidifiers can also be found in the product brochure. Download the PDF directly here.
Trotec: Innovation made in Germany
Take a look behind the scenes: As one of the internationally leading manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, dehumidification, heating, air conditioning and ventilation. We rely 100 % on research, development, design and production in Germany for our high-performance devices. For the highest quality requirements, sophisticated system solutions and fresh ideas.
A few practical benefits:
- Professional quality "made in Germany" – originally produced by Trotec
- Especially developed for use in wet rooms
- Corrosion-protected construction made of fibreglass-reinforced plastic – easy to clean
- Powerful air circulating radial fan
- Polyester-coated, corrosion-protected heat exchanger
- Infinitely adjustable hygrostat
- Fully automatic operation
- Professional hot gas automatic defrosting
- High and low pressure switch
- Prepared for wall mounting
- Optionally available with condensate pump
- Many more equipment options and special designs available
Shop
/en_GB/1125000319/Swimming-pool-dehumidifier-DS-30-107556-1666339627.jpg)
Swimming pool dehumidifier DS 30
3,199.95 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.125.000.319 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 20 | |
| At 30 °C / 80 % RH [l/24h] | 45 | |
| Suitable for pool sizes of up to [m²] | 25 | |
| Air flow rate | ||
| Level Max. [m³/h] | 700 | |
| Operating range | ||
| Min. temperature [°C] | 0 | |
| Max. temperature [°C] | 40 | |
| Min. humidity [% r.F.] | 30 | |
| Max. humidity [% r.F.] | 90 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Nominal current consumption [A] | 4.4 | |
| Power input [kW] | 0.75 | |
| Required current starting phase [A] | 15.8 | |
| Recommended fusing [A] | 16 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Heat emission | ||
| kW | 1.9 | |
| Coefficient of performance (COP) | 2.5 | |
| Heat recovery | ||
| Max. heat emission to water [kW] | 1.4 | |
| Compressor | ||
| refrigerant | R-407C | |
| Amount of refrigerant [g] | 500 | |
| GWP factor | 1,774 | |
| CO2 equivalent | 0.887 | |
| Pressure suction side [MPa] | 0.7 | |
| Pressure outlet side [MPa] | 2.7 | |
| Sound values | ||
| Distance 3 m [dB(A)] | 50 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 265 | |
| Width (packaging excluded) [mm] | 800 | |
| Height (packaging excluded) [mm] | 665 | |
| Weight | ||
| (packaging excluded) [kg] | 46 | |
| Equipment, features and functions | ||
|---|---|---|
| Automatic defrost system | ||
| Electronic | ||
| Hygrostat | ||
| Internal | ||
| External | ||
| Condensate drain | ||
| Hose connection possible | ||
| Hose included in the scope of delivery | ||
| Recommended hose size [mm] | 10 | |
| Condensate pump | ||
| Available | ||
| Housing design | ||
| Plastics | ||
| Mobility | ||
| Forklift | ||
| Rubber-tyred metal wheels | ||
| Carry/transport handle(s) | ||
| Plastic wheels | ||
| Non-marking full-rubber wheels | ||
| Swivel casters with parking brakes | ||
| Adjustable bar handle | ||
standard equipment
optionally available
not available