Construction dryer TTK 900 MP
Easy to transport, hard to beat – our ultimate condenser dryer for professional drying applications
Construction dryer at its best!
Designed as reference class of professional construction dryers the TTK 900 MP practically leaves nothing to be desired. Its tough design and robust components ensure a permanently maximum dehumidification performance and value retention. Owing to a perfect combination of an especially powerful and efficient rotation compressor, an utterly robust high-pressure radial fan as well as high-quality electronic and mechanical components, the TTK 900 MP can impress with an excellent dehumidification capacity, especially at low ambient temperatures.
Powerful air-circulating radial fan with dry air outlet on both sides
In order to quickly distribute the dry, dehumidified air in the entire room, the TTK 900 MP is fitted with a dry air outlet on both sides. This way, the dry air is blown out at a high volume by the high-pressure radial fan via two air outlet sides without dynamic pressure and can flow evenly through the room – an enormous practical advantage for the fast drying of large rooms!
At the same time, the TTK 900 MP has been consistently designed to provide maximum mobility for ever-changing sites of operation and to withstand rough working conditions. This is why the TTK 900 features not only a carriage with adjustable push handle, but also large wheels with non-marking rubber tyres – all combined in a robust metal housing.
Along with its minimized energy and floor space requirements the TTK 900 MP presents the ultimate construction dryer, which is also suitable for water damage drying and dewatering waterworks facilities or large storage facilities with low ambient temperatures.
Effective process for high dehumidification performance of up to max. 110 l/24 h
For an effective dehumidification, the TTK 900 MP comes equipped with a powerful automatic two-point hot gas defrost system based on the bypass procedure. This system only requires very short defrost phases, which increases the performance level and makes the device ideally suited for an effective dehumidification in low-temperature surroundings such as unheated rooms.
If required, a hygrostat can be connected to the TTK 900 MP enabling automatic humidity-controlled dry keeping in continuous operation. A condensate pump for condensate discharge across storeys is also available for this purpose.
TTK 900 MP with VarioDry technology – unique in the world!
The unique combination of an innovative heat exchanger design with optimised evaporator circuit and highly efficient EC radial fan makes it possible: The TTK 900 MP can be easily adjusted to the desired operating environment and obtains the optimum setup for the respective type of application by means of just one switch setting. Both high relative humidity levels and lower temperatures (e.g. when drying new buildings) or lower relative humidity levels in warmer environments for water damage restorations are pefectly suitable for the device. Simply select the construction drying or water damage restoration mode via the VarioDry function switch, and the TTK 900 MP automatically adjusts its device setup to the maximum drying performance in this operating mode!
At the same time, the new, elaborate two-point automatic hot-gas defrosting system ensures extremely short defrosting times and thus considerably longer drying cycles.
Benefit now from 20 % more efficiency than before
The TTK 900 MP impresses with 10 % more performance at 10 % less energy consumption compared to the predecessor model TTK 800. Thus, it can boast the best energy coefficient in its class as a result of an elaborately balanced energy management system! In plain words: No other dryer in this area achieves a higher kW output in litres than the TTK 900 MP – across all fields of application, water damage restoration and drying new buildings.
The sum of these advantages makes the TTK 900 the new reference for professional dryers worldwide!
100 % construction dryer – the name says it all
It's not just a name that turns a commercial dehumidifier into a true construction dryer. The name is an obligation: the device must be able to dry large amounts of air in continuous operation, on the construction site, in cool environments. After all, construction dryers make their living in drying applications, not in the warehouse and particularly not in the workshop.
Which is why the construction dryers of the TTK series have been consistently designed for high dehumidification performance and a long lifetime. Even in continuous use on the construction site, the devices work reliably and without interruption – and if maintenance is required, it can be carried out more quickly than ever before:
Innovative central chassis – low-maintenance modular design
TTK 500 and TTK 900 MP have an innovative central chassis from which the robust metal housing can be quickly and easily removed. Ideal for service, maintenance and cleaning tasks.
And the entire electronic equipment is not only specially enclosed and thus reliably protected against harmful deposits – it is also designed in a modular fashion and all individual electronics modules are provided with maintenance-friendly plug connections. The replacement of individual modules is therefore quick and easy, even on site: unplug, replace module, plug back in – done. Maintenance-related periods of non-use can thus be reduced to a minimum.
Refrigerant R-454C – less GWP, more efficiency and safety
Refrigerants frequently used in compression refrigeration dryers up to now have a high greenhouse potential. One of the reasons for the EU's F-gas phase down – and for Trotec a self-evident obligation to use not only environmentally friendly but also an equally safe and efficient refrigerant for the TTK construction dryers of the latest generation.
R-454C scores in all three aspects – eco-friendliness, safety and efficiency. Therefore, R-454C is the refrigerant of our choice for the powerful TTK construction dryers.
Unlike natural refrigerants such as propane, R-454C is only flammable with high ignition energy. Consequently, there is no risk of explosion even in the event of a leak, which means that operation and maintenance of the heat exchanger remains simple and safe. The non-toxic R-454C is ideally suited for hermetically sealed refrigeration systems and is not only characterized by a high COP (coefficient of performance), but also by a very low GWP (global warming potential) of less than 150 and an ODP (ozone depletion potential) of 0. This means that R-454C contributes at least 10 times less to the greenhouse effect when it escapes into the atmosphere than commonly used refrigerants.
Practical tip for quicker construction drying
You can halve drying time by combining fans and construction dryers. Each dryer is supplemented with a fan, which has a significant influence on the drying performance and therefore also the duration of the drying process.
The increased air circulation causes a quicker evaporation, for the higher the flow rate at the material surface, the sooner will the drying process be completed. Our recommendation to assist in drying: combine the TTK construction dryers with axial fans of our TTV series or TTV-S series.
Tried and tested technology reinvented – special equipment features of the TTK 900 MP
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
A few practical benefits:
- Development, design, production: 100 % Trotec
- High dehumidification performance – also at temperatures below 15 °C
- VarioDry technology – unique in the world: Selector switch for construction drying or water damage restoration –
the optimal setup for maximum drying performance in any operating environment - Advanced heat exchanger design –
equally optimised for different ambient temperature ranges - Powerful EC radial fan with dry air outlet on both sides for high air circulation rates
- Pleasantly quiet and with a significantly higher energy efficiency at the same time compared to the TTK 800
- Professional automatic hot gas defrost system based on bypass procedure
- Two-point hot gas defrosting for extremely shortened defrosting times and thus considerably longer drying cycles
- Innovative central chassis for fast cleaning and inspection
- Particularly maintenance-friendly: plug-in electronics modules, easy to replace without tools
- Stackable to save space – small storage space in the warehouse
- Robust and highly mobile with large wheels – transportable both in vertical and horizontal position
- Connection for external hygrostat
- Adjustable push handle – horizontal or vertical
- Standard operating hours counter
Proper energy billing for existing equipment without meters?
You're using this or another electrical appliance without MID-compliant energy consumption meter of which you have to report the current consumption to insurance companies? Then the BX50 MID provides the perfect solution. Just install it between the device and a fixed socket – done!
All Commercial dehumidifiers of the TTK series in direct comparison:
To find the Commercial dehumidifier of the TTK series which exactly meets your requirements, please consult the concise overview of all Commercial dehumidifiers of the TTK series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
Buy
/en_GB/1120000802/Commercial-Dehumidifier-TTK-900-MP-131389-1632133683.jpg)
TTK 900 MP Commercial Dehumidifier
3,249.95 £ incl. VAT Show net price (VAT not included)
Technical data
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.120.000.802 | |
| Dehumidification performance | ||
| At 20 °C / 60 % RH [l/24h] | 49 | |
| At 30 °C / 80 % RH [l/24h] | 96 | |
| Max. [l/24h] | 110 | |
| Air flow rate | ||
| Max. air volume flow [m³/h] | 850 | |
| Level 1 | 600 | |
| Level 2 | 850 | |
| Recommended room size construction drying | ||
| m³ | 800 | |
| m² | 320 | |
| Recommended room size dry keeping | ||
| m³ | 1,600 | |
| m² | 640 | |
| Ambient conditions | ||
| Min. temperature range [°C] | 3 | |
| Max. temperature range [°C] | 40 | |
| Min. humidity range [% r.F.] | 25 | |
| Max. humidity range [% r.F.] | 90 | |
| Electrical values | ||
| Mains connection | 220 - 240 V, 50 Hz | |
| Power input [kW] | 2.098 | |
| Nominal current consumption [A] | 9.8 | |
| Recommended fusing [A] | 16 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Compressor | ||
| Rotary piston compressor | ||
| refrigerant | R-454C | |
| Amount of refrigerant [g] | 900 | |
| GWP factor | 146 | |
| CO2 equivalent [t] | 0.13 | |
| Pressure suction side [MPa] | 0.7 | |
| Pressure outlet side [MPa] | 2.7 | |
| Max. permissible pressure [Mpa] | 3 | |
| Sound values | ||
| Distance 3 m [dB(A)] | 59 | |
| Functions and features | ||
| Continuous operation | ||
| Nonstop dehumidification (continuous operation) | ||
| Operating button for draining residual water | ||
| Connection for external condensate drain | ||
| Vario Dry operating mode | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 500 | |
| Width (packaging excluded) [mm] | 565 | |
| Height (packaging excluded) [mm] | 960 | |
| Weight | ||
| (packaging excluded) [kg] | 69 | |
| Equipment, features and functions | ||
|---|---|---|
| Automatic defrost system | ||
| Hot gas | ||
| Electronic | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Fan | ||
| Radial | ||
| axial | ||
| stages | 2 | |
| Room air filter | ||
| Readily accessible | ||
| Cleanable | ||
| Ionizer selectable | ||
| Operating hours counter | ||
| Operating hours counter | ||
| Power meter | ||
| Mobility | ||
| Wheels | ||
| Feet | ||
| Adjustable bar handle | ||
| Carriage design | ||
| Condensate drain | ||
| Hose connection possible | ||
| Hose included in the scope of delivery | ||
| Condensate pump | ||
| Recommended hose size [mm] | 16 | |
| Housing design | ||
| Metal | ||
standard equipment
optionally available
not available