Designer convector TCH 2510 E
2,500 watts convector, can be used as an ultra-flat wall-mounted or floor-standing device, with weekly timer, innovative open window detection and room temperature indication for fast, cosy feel-good warmth
Maximum heating performance with intelligent heating function
Our energy-saving Convectors of the TCH series are becoming increasingly popular due to steadily rising heating costs. Why should you start the expensive oil or gas heating on cooler days when it can be easier and, above all, cheaper? When the stationary heating system is still switched off for financial reasons on cooler days in the transitional period to autumn or winter, the ultra-flat design convector TCH 2510 E with its powerful 2,500 watts heating output, steplessly adjustable via thermostat, provides an odourless and noiseless feel-good warmth with no start-up time. The device can be used both as a floor-standing appliance and as a wall-mounted unit.
No Trotec convector offers a larger heating surface
The powerful and highly efficient aluminium heating element with a fabulous length of approx. 110 centimetres as well as the aerodynamically shaped air outlets on the top ensure the best possible heat distribution in rooms up to 30 m² or 75 m³. Whether in the living room, bedroom or children's room, in offices, in bathroom and wellness areas or in unheated garages, conservatories or holiday homes: Where fast and/or additional heat is required, the TCH 2510 E convector, which is splash-proof to IP24 and approved for wet rooms, shows its superiority over immobile heating solutions.
Even convection heat
The air inside the convectors of the TCH series is warmed up by electrically heated wires and thus rises as warm air, which creates a natural suction that makes cold room air flow into the device. This leads to a permanent circulation of warm air reaching all corners of the entire room. The heat distributes evenly and an excessive or insufficient heating of individual areas is prevented. Once the preset degree of heat has been reached, the device reduces its output while maintaining the desired temperature.
The slightly smaller TCH 1510 E convector is recommended for rooms up to 20 m²
Heating capacity | Length of heating element | Recommended room size | |
---|---|---|---|
TCH 1510 E | 1,500 watts | approx. 55 mm | 20 m² or 50 m³ |
TCH 2510 E | 2,500 watts | approx. 110 mm | 30 m² or 75 m³ |
Innovative open window detection prevents wasting energy
Regular ventilation is essential for a good and healthy indoor climate. To ensure that no unnecessary energy is wasted in the process, the smart TCH 2510 E is equipped with an energy-saving open window detection. If a window is opened in the room and the convector is in thermostat-controlled automatic mode, the device reduces the heating output until the window is closed again. In addition, a permanent room temperature control with smart automatic heating function reduces the already economical energy consumption of the TCH 2510 E. When the preset desired temperature in the range of 0 and 50 °C is reached, the heating element is switched off fully automatically and only switches on again when reheating is required. Pretty smart! This way, the energy consumption of the convector remains pleasantly low and no money for expensive energy costs is thrown down the drain.
Full equipment for warm feel-good times
The comfort equipment of the design convector is topped off by a room temperature and time indication, two operating modes (automatic and weekly mode), stable adjustable feet for flexible use in different locations, a wall holder, an operating hours display and an extra-long power cable for maximum freedom of movement.
Cosy and warm interior spaces with comfort
Just like all convectors of the TCH series, the TCH 2510 E uses the effect of even convection heat for operation. The device can be used in almost any place in your private home or office, anywhere heat is needed: E.g. as a quick source of heat when the main heating system has failed, as a reliable temporary heating solution before the start of the heating period, or for heating conservatories, workshops, garages, hobby rooms or basements that are not connected to a central heating system.
Operating hours display – allows you to keep an eye on the consumption
Whether you are a tenant or a landlord, it is occasionally helpful to know how much heating costs have been incurred in a certain period. The convenient operating hours display allows you to check and record the consumption of the TCH 2510 E with hourly precision.
Weekly mode – individual heating times and temperatures for every day
Every day is different! At the weekend, we usually spend more time at home which increases our need for heat. A programmable weekly timer allows you to programme individual heating times and room temperatures for each day of the week. Want more heat at the weekend and less heat during the week when leaving the house in the morning? No problem! In week mode, individual room temperatures and heating times can be assigned to each day of the week. How convenient!
Child lock – for safe operation in the children's room
The child lock protects the convector's device settings from curious children's hands. Once activated, the device settings can no longer be changed via the control panel.
Quick warmth on cold days – nothing could be easier. The designer convectors TCH 2510 E and TCH 1510 E convince with intelligent heating technology and uncompromisingly powerful heating performance.
TCH 2510 E – special equipment features
Cosy warmth wherever it is needed ...
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Heating capacity of up to 2,300 W for clean, non-condensing and odourless heat
- Extra large heating element of approx. 110 cm length
- Temperatures ranging from 0-50 °C selectable
- Infinitely variable thermal control
- Innovative open window detection
- Automatic temperature control / Intelligent automatic heating function
- Frost monitor function
- Energy-efficient operation thanks to automatic switch-off upon reaching the set value
- Current room temperature indication
- Timer function
- Weekly timer
- Operating hours display
- LCD display
- Child lock
- Overheating protection
- Can be used as wall-mounted or floor-standing device
Frost monitor function
Ideal for short-term property vacancies or temporarily used rooms
Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.
Do you need additional heating for slightly smaller rooms?
Discover the modern design convector TCH 1510 E in a slim format.
The TCH 1510 E comes with a powerful heating capacity of 1,500 watts. Its highly efficient and large aluminium heating element has a length of approx. 55 cm. The optimally used heating surface quickly creates a cosy heating environment in living rooms and office interiors of up to 20 m².
The TCH 1510 E design convector can also be used as a wall-mounted or floor-standing device.
Click here to find out more ...
standard equipment
optionally available
not available
Buy
Design convector TCH 2510 E
You save: 90.00 £
169.95 £
79.95 £
incl. VAT
Show net price (VAT not included)
Technical data
Technical data | ||
---|---|---|
General information | ||
Article number | 1.410.000.560 | |
Heating capacity | ||
Level 1 [kW] | 2.5 | |
Level Max. [kW] | 2.5 | |
Electrical values | ||
Mains connection | 220 - 240 V, 50 Hz | |
Max. power input [W] | 2,500 | |
Nominal current consumption [A] | 10.8 | |
Safety feature | ||
IP type of protection | IP24 | |
Protection class | I | |
Overheating protection | Available | |
Electric connection | ||
Connection plug | CEE 7/7 | |
Cable length [m] | 1.8 | |
Mobility | ||
Feet | ||
Dimensions | ||
Length (feet included) [mm] | 280 | |
Width (feet included) [mm] | 1,250 | |
Height (feet included) [mm] | 480 | |
Weight | ||
(packaging excluded) [kg] | 9.5 |
Equipment, features and functions | ||
---|---|---|
Functions and features | ||
On / off switch | ||
LED display | ||
Screensaver | ||
Indication of temperature/heating-up phase | ||
Timer function | ||
Weekly schedule | ||
Weekday display | ||
Open window detection | ||
Frost monitor function | ||
Operating control lamp | ||
Thermostat-controlled automatic operation | ||
Automatic switch-off upon reaching the set value | ||
Child lock | ||
Tilt protection | ||
Housing design | ||
Metal |
standard equipment
optionally available
not available