Convector TCH 1 E
Compact frost monitor for heating smaller rooms
Economical heating capacity of 520 W for clean, non-condensing and odourless heat
Used at home, in the office or the hobby workshop – the TCH 1 E provides agreeable feel-good warmth. The small convector is a very convenient heating solution even in a restroom or during your camping holiday in a camper van or caravan. With its frost monitor function the compact, rapid heater is moreover excellently suited to generate warmth in otherwise unheated small rooms, to prevent excessive cooling via thermostat control and to keep water lines from freezing up.
Cost-efficient heat generation using a power saving function
Regardless of whether the heater is used for the unattended operation as frost monitor, as an additional heat source on cold days or as the sole heating solution in rarely occupied rooms:
With its heating capacity of 520 watts the TCH 1 E is a remarkably cost-efficient heating solution. When the target temperature previously set via the infinitely variable thermostat is reached, the convector automatically switches off and back on again as soon as the temperature drops below the defined value. Therefore, you only heat as much as is necessary whilst saving energy costs as effectively as possible!
Clean warmth generated in a breath
The start-up of the TCH 1 E could hardly be any simpler: All it takes is to unpack the device and to plug it in. Then you can set the desired target temperature via the thermostat at the side of the device and the TCH 1 E will immediately start the clean, odourless and noiseless heating operation in automatic mode.
The TCH 1 E impresses with many practice-oriented details:
All Convectors TCH-E series in direct comparison:
To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Economical heating capacity of 520 W for clean, non-condensing and odourless heat
- Infinitely variable thermal control
- Thermostat-controlled automatic operation
- Frost monitor function
- Energy-efficient operation thanks to automatic switch-off upon reaching the set value
- Particularly easy handling
- Overheating protection
- Noiseless heating
- Secure footing due to large feet
Frost monitor function
Ideal for short-term property vacancies or temporarily used rooms
Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.
Optimum room temperature control with the socket thermostat BN30
Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.
Radio thermostat BN35 with timer switch for the socket
With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.
standard equipment
optionally available
not available
Buy
/en_GB/1410000501/Convector-TCH-1-E-103782-1556531840.jpg)
Convector TCH 1 E
You save: 26 %
33.95 £
24.95 £
incl. VAT
Show net price (VAT not included)
Technical data
| Master Data | |
|---|---|
| SKU | 1410000501 |
| Length without packaging [mm] | 105 mm |
| Length with packaging [mm] | 110 mm |
| Width without packaging [mm] | 275 mm |
| Width with packaging [mm] | 285 mm |
| Height without packaging [mm] | 240 mm |
| Height with packaging [mm] | 255 mm |
| Weight without packaging [kg] | 1 kg |
| Weight including packaging [kg] | 1.5 kg |
| Product information | |
| Recommended room size [m²] | 10 |
| Recommended room size [m³] | 25 |
| Technical data | |
| Heating capacity [W] | 450 |
| Heating element | Stainless steel heating element |
| Number of heating levels | 1 |
| Energy | |
| Cable length [m] | 1.4 |
| Rated current consumption A | 2.17 |
| Power connection and frequency | 220 - 240 V, 50 Hz |
| Power consumption | 500 W |
| Recommended fuse protection [A] | 10 A |
| Protection | |
| Protection class | I |
| Scope of delivery |
|---|
| Feet |
| Functions and features |
|---|
| Adjustable thermostat |
| Auto restart function |
| Automatic switch-off upon reaching the set value |
| Frost monitor function |
| Operating control lamp |
| Overheating protection |
| Steplessly adjustable thermostat |
| Thermostat-controlled automatic operation |
| Functional principle |
|---|
| Electric(al) |
| Housing design |
|---|
| Sheet steel – coated |
| Mobility |
|---|
| Carry/transport handle(s) |
| Feet |
| Connector plug | |
|---|---|
| Designation | |
| IP type of protection | |
|---|---|
| Label | |
| Protection towards contact | |
| Protection towards water | |
| Protection towards foreign matter | |