Smart monobloc wall air conditioner PAC-W 2600 SH
4-in-1 air conditioner with inverter technology without external unit: cool, heat, ventilate and dehumidify with only one device
Pleasantly discreet on the outside. Nicely cooling down or heating up on the inside.
Whether in your own home, flat or office: air conditioning is a real boon in the hot summer. With a powerful wall-mounted device, staying in the living room or bedroom becomes bearable even in case of tropical outside temperatures. Moreover, modern inverter air conditioners with heat pump technology are recommended as a cost-effective additional heating system for the cold season.
The only sticking point: the installation of an energy-saving split air conditioner always requires a hole to be drilled into the exterior masonry as well as the installation of an unsightly external unit. This structural change to the exterior facade is not only unattractive, but also subject to approval. As a tenant or flat owner, you have to obtain the consent of the homeowner before installation – an often tedious process. With the PAC-W 2600 SH, on the other hand, you do not have to fear any visual impairment of the house facade, as the two ventilation openings blend discreetly into the external appearance.
The highly efficient devices such as the PAC-W 2600 SH are designed for indoor installation and can be placed either as a chest unit (above the floor) or as a wall unit (on the wall / under the ceiling).
PAC-W 2600 SH: maximum cooling – without any disturbing external unit
The modern, all-white, smart air conditioner PAC-W 2600 SH does not require an unsightly external unit, and the installation in rented or owner-occupied flats is generally possible without any problems. Only two holes (∅ 18 cm) must be drilled into a wall leading outdoors to install the stylish designer unit on an indoor wall. The air inlet and outlet ducts allow fresh air to enter the room and, in return, the heat to be transported from the inside to the outside. Since the wall-mounted air conditioner PAC-W 2600 SH cools without an external heat exchanger unit, there is also no need to set up a refrigerant circuit between the air conditioner and the external unit. Therefore, no trained air conditioning installers are required for installation.
Advantages of an air conditioner without external unit and exhaust air hose:
- The air conditioner can also be installed on the 10th floor, as the installation is done from inside (no installation of an external unit required)
- Cheaper than a remote external unit
- Can simply be plugged into a socket
- No unsightly and noisy external unit on the facade
- No half-open window (for the exhaust air hose) through which warm air flows in
- Lower noise emission compared to air conditioners with exhaust air hose
- No expensive installation by air conditioning installers
- No maintenance costs
Enjoy pleasant refreshment! You can also find all the relevant information about our comfort air conditioning units in the product brochure. Download the PDF directly here.
Propane (R290) as environmentally friendly refrigerant in air conditioning systems
Every year, several million tons of harmful CO2 emissions (greenhouse gas) are emitted to the atmosphere due to synthetic refrigerants. For this reason, the utilization of alternative refrigerants has become one of our key objectives. By using propane (R290) as refrigerant this air conditioner makes a valuable contribution to protecting our climate.
The natural refrigerant propane (R290) is an organic compound belonging to the group of hydrocarbons. Unlike synthetic refrigerants the environmentally friendly propane (R290) comes with neither ozone depletion potential (ODP = 0) nor a noteworthy greenhouse effect (GWP = 3).
Additional bonus for the environment: Owing to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant thereby additionally reducing your energy costs.
Intelligent air conditioner control on the move – simply via app
Whether in the office or on the move – with the mobile app “Trotec Assistent” you have control over your air conditioner from anywhere. No matter whether you have forgotten to switch off the air conditioner, come home early from work and want to pre-cool the rooms, or want to change the target temperature because the day is warmer or colder than expected. With the Trotec Assistent mobile app you turn your smartphone into a convenient remote control to control the numerous functions of your air conditioner at home or in the office from anywhere in the world.
Save energy while cooling or heating without external unit
Air conditioner for permanent installation without external unit and exhaust air hose – save yourself the purchase of several individual devices to provide cooling in the hot summer and cosy additional warmth in the cool autumn and winter. The air conditioner PAC-W 2600 SH, which is pleasantly energy-efficient thanks to state-of-the-art inverter technology, combines four climate functions directly in its merely 20 cm deep SlimLine housing to create a pleasant indoor climate all year round. Air conditioners with inverter technology are quieter and have a lower power consumption. The compressor is soft-starting and always adapts to the current conditions. Thanks to inverter technology, the PAC-W 2600 SH saves up to 30 % of energy compared to a product without inverter.
Four operating modes for a pleasant climate with feel-good temperatures:
- Cooling with state-of-the-art inverter technology (energy efficiency category A)
- Heating with energy-saving heat pump technology (energy efficiency category A+)
- Ventilation with 3 fan stages
- Dehumidification with a dehumidification performance of 1.2 l/h
Special highlight: In all 4 operating modes, the swing function can be activated for optimum air distribution in the room. To filter out fluff, dust and animal hair from the breathing air as well, an easy-to-clean air filter is located on the top of the device.
Enjoy draught-free cooling: The air conditioner has 2 hose lines that feed fresh air into the room from the outside and discharge warm air to the outside. When the outside air is still cool in the morning and evening, the outside air is directed into the room, which increases the cooling effect and saves energy. In addition, since no negative pressure is created in the room by the fresh air supplied from outside, there is also no unpleasant draught caused by air flowing in from neighbouring rooms.
Inverter technology saving up to 30 % of power
Conventional air conditioners, which have been designed exclusively for cooling the room, work based on the on/off principle. The integrated cooling compressor reduces the room temperature at full load until the target temperature is reached. Then the compressor switches off. If it becomes too hot in the room, the compressor switches on again to reduce the room temperature again with full power. This consumes a lot of energy.
Inverter air conditioners like the PAC-W 2600 SH regulate the room temperature without the cooling compressor switching on and off. This helps to keep the room temperature at a constant level without fluctuations. The compressor consumes electricity continuously, but it never runs at full load. This prevents damage to the system. Additionally, due to the consistently low power consumption, inverter air conditioners also cool very energy-efficiently and save up to 30 % of energy compared to conventional products. This pays off quickly!
Feel-good temperatures all year round – controlled fully automatically
Once mounted on the wall and set, the PAC-W 2600 SH controls the room temperature fully automatically. On hot summer days, the air conditioner cools heated bedrooms, living and office spaces sized up to 34 m² or 85 m³ down to the desired target temperature (16 °C to 30 °C) with a high cooling capacity of 2.6 kW/9,000 Btu/h. In the cool transitional period of autumn and in the cold winter, the all-rounder with its powerful 2.0 kW heating capacity provides heat (16 °C to 30 °C) that spreads quickly in the room. Immediately noticeable refreshment and cooling on the skin is provided by the three-stage ventilation mode with deactivated cooling or heating function. The swing function, which can be switched on in addition, ensures that the temperature-controlled air is distributed over a large area. These comfort features for creating an all-round agreeable room climate are completed by the manually selectable dehumidification function to optimally control the humidity level. Owing to its innovative technology and the lack of a bulky external unit, the air conditioner PAC-W 2600 SH sets new standards in air-conditioning technology. Just as convincing as its design is its high feel-good factor. Convince yourself of the sophisticated equipment and outstanding user comfort.
Feel-good temperature planning at its best – 24h timer
Adapt the operating time of the PAC-W 2600 SH to your rhythm of life. This is not only convenient, it also saves you a great deal of energy costs. The comfortable 24-hour timer allows you to program individual switch-on and switch-off times based on a predefined number of operating hours (1 – 24 hours). If your plans change and you come home earlier or later, you can easily modify the timer on the go with your smartphone. Made possible by the Mobile app!
Restful night's sleep with a pleasant temperature for falling asleep
Whether in the summer or in the winter – unpleasant temperatures in your bedroom can make you lose your sleep. This is why the air conditioner PAC-W 2600 SH comes equipped with an ultra-silent night mode with automatically controlled temperature adaptation. In cooling mode, the preset temperature is gradually increased by 2 °C during the first two hours and then kept constant. In heating mode, on the other hand, the night mode makes the room temperature decrease by 2 °C in the first two hours. This prevents you from freezing at night, or from waking up or sleeping restlessly due to too high temperatures. Pretty smart!
Mobile app for control via smartphone or tablet from anywhere
All settings of the PAC-W 2600 SH can be made either via the convenient IR remote control or the Trotec Mobile app. Coming home early and longing for a cool-down? No problem – simply activate the air conditioner via your smartphone or tablet while on the move. You can call up the current room temperature, set the desired temperature, activate cooling or heating – and much more. The smart air conditioning control automatically regulates the temperature, cools down the room even before you get home and switches off automatically when you leave the house. In addition, you can also adjust the temperature remotely.
WLAN integration with convenient smartphone control
Ordinary remote controls have the unpleasant property of always disappearing between the sofa cushions just when you need them. It's good to know that you don't actually need the remote control of the air conditioner PAC-W 2600 SH any more. The air conditioner can be easily integrated into the existing WLAN (wireless network) via the Mobile app available online and then controlled via smartphone or tablet. Even while on the move or on the other side of the world! Of course, only by you and your device!
Whether in spring, summer, autumn or winter – with the 4-in-1 air conditioner PAC-W 2600 SH you can enjoy pleasant indoor temperatures all year round. While saving energy and without expensive installation work!
PAC-W 2600 SH – special equipment features
Cooling for any room
All Comfort air conditioners of the PAC series in direct comparison:
To find the Comfort air conditioners of the PAC series which exactly meets your requirements, please consult the concise overview of all Comfort air conditioners of the PAC series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- 4-in-1 air conditioner: cooling, heating, ventilation, dehumidification
- Ultra-slim wall-mounted device without external unit – no visual impairment of the house facade
- Low installation effort
- WLAN integration and smartphone control via Mobile app
- Suitable for rooms sized up to 34 m² / 85 m³
- Cooling capacity of up to 2.6 kW (energy efficiency category A)
- Heating capacity of up to 2.0 kW (energy efficiency category A+)
- Energy-saving inverter technology for constant room temperatures without fluctuations
- No draught effect in the room thanks to fresh air supply from outside
- 3 fan stage
- 24h timer function
- IR remote control
- Swing function
- Removable air filter against animal hair, fluff, dust
- Night mode
- Quiet operation ≤ 48 dB(A)
- Environmentally friendly refrigerant R290
All important features at a glance
Supplied ready for installation, can be easily installed
The air conditioner PAC-W 2600 SH is supplied including all parts and wall ducts required for installation. Unlike split air conditioners, the monobloc air conditioner does not require any additional installation of coolant lines. Please note that the wall-mounted device is comparatively heavy due to its integrated cooling and heating technology and should be installed by at least two experienced and skilled persons. A drilling template, screws and wall plugs are supplied for the precise drilling of the wall holes and positioning of the suspension rail.
Complete scope of delivery:
Designer wall air conditioner PAC-W 2600 SH, 2 x hose adapter inside, 2 x hose adapter outside, 4 x connecting chain, wall template, 2 x plastic film sheet (can be bent to form a hose line), suspension rail, set of screws/wall plugs/washers, remote control, manual
Calculation of the required cooling capacity
Find out how to easily calculate the cooling capacity required for your living and office spaces.
How much power is required to cool a room? The rule of thumb: Every cubic metre of room volume requires a cooling capacity of 30 watts (1 m3 = 30 W).
Using this blanket value the required cooling capacity can be determined quickly and easily for every room size. Example: Assuming a room with 34 m² of floor space and a room height of 2.5 m.
The resulting calculation reads as follows:
Room volume calculation:
34 m² of floor space x 2.5 m ceiling height = a room volume of 85 m³
Calculation of the cooling capacity required for the room volume:
85 m³ cubature x 30 watts of cooling capacity = required cooling capacity of 2,550 watts
Conversion from watt to kilowatt:
2,550 watts = 2.55 kW
Result: In a room with 34 m2 of floor space and a height of 2.5 m you need an air conditioner with a cooling capacity of 2.6 kW – such as the PAC-W 2600 SH.
This is only a rough calculation formula for living and office spaces with modern insulation (passive house standard), though. The required cooling capacity further depends on the room's "thermal load": For selecting an appropriate air conditioner, the factors of insolation, insulation, window dimensions, the number of persons as well as the heat sources play an equally important role.
You would like to find out more? Our info page "Practical knowledge concerning air conditioning" contains all the important information. By reading it you will quickly become an air conditioning expert.
Monobloc or split? One-hose or two-hose technology?
Don't get hosed by competitive statements, we provide the big picture. Before purchase make sure to get an overview of device differences, functional principles and possible applications.
Trotec, your climate expert, has compiled the most important facts in a reader-friendly overview! Direct link to the "Practical knowledge concerning air conditioning" ...
A boost of freshness: Enjoy maximum refreshment anywhere in the room!
Do you want to additionally support the effect your air conditioner has? In order to really distribute the cool air into every last corner of the room we recommend using the powerful fan TFH 2000 E with turbo spin technology. The extremely compressed turbulent air flow gushes out of the TFH 2000 E as tornado-like air column that revolves around itself and advances deep into the room. The air current breaks through warm and cold room air zones mixing it all up. The exiting air current encounters the opposite wall or the ceiling and from there is deflected to all sides.
In a constant circulation the air returns to the rear of the fan flowing along the side walls and the ceiling. It is sucked in once more to start a new cycle. This effective turbo spin method ensures maximum circulation and mixing of the room air. The temperature difference between cold air near the ground and warm air just beneath the ceiling is substantially reduced, instead the air temperature in the entire room is noticeably evened out.
4-in-1 air conditioner: cooling, heating, ventilation, dehumidification. The PAC‑W 2600 SH wall-mounted air conditioner, which is just 20 cm deep and around 99 cm wide, cools or heats rooms up to 34 m² in size to the desired target temperature in the range of 16 °C to 30 °C in no time at all.
You save: 391.72 £
1,528.64 £ 1,136.92 £ incl. VAT Show net price (VAT not included)
|Max. cooling capacity [kW]||2.6|
|Max. cooling capacity [Btu/h]||9,000|
|Recommended room size|
|Air flow rate|
|Level Max. [m³/h]||500|
|Max. dehumidification performance [l/h]||1.2|
|Attainable room temperature (min.)|
|depending on operating conditions [°C]||16|
|Min. temperature range [°C]||7|
|Max. temperature range [°C]||35|
|Mains connection||220 - 240 V/50 Hz|
|Power input [kW]||1|
|Power input heating [kW]||0.65|
|Nominal current consumption [A]||5|
|Connection plug||CEE 7/7|
|Cable length [m]||1.9|
|Minimum room size [m²]||14|
|Amount of refrigerant [g]||290|
|Pressure suction side [MPa]||1.3|
|Pressure outlet side [MPa]||3.8|
|Noise emission [dB(A)] according to EN ISO 3745:2012||59 dB(A)|
|Level Max. - Distance 1 m [dB(A)]||48|
|Total length [m]||450 mm|
|Length (packaging excluded) [mm]||1,000|
|Width (packaging excluded) [mm]||205|
|Height (packaging excluded) [mm]||585|
|(packaging excluded) [kg]||38|
|Equipment, features and functions|
|With water tank|
|Switch-on time preselectable|
|Switch-off time can be preselected|
|Room air filter|
|Auto restart function|
|Energy saving mode|
|Sensor-controlled temperature indication|
|Automatic fault diagnosis|
|Indication of the current room temperature|